Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening
Source abstract
Abstract
Abstract A novel surface treatment method of combining ultrasonic surface rolling (USR) and shot peening (SP) in different sequences was proposed. The microstructures and rolling contact fatigue (RCF) behaviors of 17Cr2Ni2MoVNb steel were investigated after USR treatment, SP treatment and combined (USR + SP + USR) treatment. Results showed that the combined treatment can significantly generate ultra-fine grains, improve surface microhardness and induce high intensity residual compressive stress in material surface layer. The samples after combined treatment with the lowest surface roughness exhibited the maximum mean RCF life of 6.610 × 106 cycles and the fatigue damage mechanism was spalling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Effect of microshot peened treatment on the fatigue behavior of laser-melted W6Mo5Cr4V2 steel gear10.1016/j.ijfatigue.2017.01.017 ↗
2. Preparation and microstructure characterization of low-temperature bainite in surface layer of low carbon gear steel10.1016/j.apsusc.2011.03.138 ↗
3. Iron and iron-based alloys for temporary cardiovascular applications10.1007/s10856-015-5473-8 ↗
4. An investigation of fretting fatigue behavior and mechanism in 17–4PH stainless steel with gradient structure produced by an ultrasonic surface rolling process10.1016/j.ijfatigue.2019.105340 ↗
5. Nanocrystallization and enhanced surface mechanical properties of commercial pure titanium by electropulsing-assisted ultrasonic surface rolling10.1016/j.matdes.2018.04.027 ↗
6. An analysis of fatigue failure mechanisms in an additively manufactured and shot peened IN 718 nickel superalloy
7. Residual stress and microstructure evolutions of SAF 2507 duplex stainless steel after shot peening10.1016/j.apsusc.2018.07.182 ↗
8. Effects of laser heat treatment combined with ultrasonic impact treatment on the surface topography and hardness of carbon steel AISI 104510.1016/j.optlastec.2018.09.030 ↗
9. Influence of multiple ultrasonic impact treatments on surface roughness and wear performance of SUS301 steel10.1016/j.surfcoat.2016.09.023 ↗
10. In situ preparation of graphene coating bonded to stainless steel substrate via CrC bonding for excellent anticorrosion and wear resistant10.1016/j.apsusc.2019.06.197 ↗
11. Microstructure and wear performance of arc-sprayed Al/316L stainless-steel composite coating10.1016/j.surfcoat.2019.06.006 ↗
12. Fatigue behavior prediction and analysis of shot peened mild carbon steels10.1016/j.ijfatigue.2018.06.004 ↗
13. Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes10.1016/j.ijfatigue.2019.105274 ↗
14. Residual stress relaxation and micro-structural development of the surface layer of 18CrNiMo7-6 steel after shot peening during isothermal annealing10.1016/j.matdes.2013.12.011 ↗
15. Tribological behavior of shot peened/ austempered AISI 5160 steel10.1016/j.triboint.2020.106197 ↗
16. Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel10.1016/j.surfcoat.2020.125497 ↗
17. Surface morphology in engineering applications: influence of roughness on sliding and wear in dry fretting10.1016/j.triboint.2011.04.020 ↗
18. Fatigue behavior of Ti-6Al-4V cellular structures fabricated by additive manufacturing technique10.1016/j.jmst.2018.09.066 ↗
19. The influence of inclusion factors on ultra-high cyclic deformation of a dual phase steel10.1016/j.msea.2019.03.077 ↗
20. The potential significance of microalloying with niobium in governing very high cycle fatigue behavior of bainite/martensite multiphase steels10.1016/j.msea.2015.10.044 ↗
21. The response of accumulated stress and microstructural refnement on cyclic deformation and associated mechanism in high strength bainite-martenite dual-phase steel10.1016/j.msea.2018.10.003 ↗
22. Effect of ultrasonic surface rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel10.1016/j.surfcoat.2019.03.061 ↗
23. Improving the fretting and corrosion fatigue performance of 300M ultrahigh strength steel using the ultrasonic surface rolling process10.1016/j.ijfatigue.2018.11.017 ↗
24. Effect of tempering temperatures on tensile properties and rotary bending fatigue behaviors of 17Cr2Ni2MoVNb steel10.3390/met8070507 ↗
25. Effect of quenching temperature on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel10.3390/met8090735 ↗
26. Role of retained austenite with different morphologies on sub-surface fatigue crack initiation in advanced bainitic steels
27. Non-inclusion induced crack initiation in multiphase high-strength steel during very high cycle fatigue10.1016/j.msea.2017.11.119 ↗
28. The effect of ultrasonic surface rolling process fretting fatigue property of GH4169 superalloy10.1016/j.ijfatigue.2019.105373 ↗
29. Ultra-high cycle fatigue property of a multiphase steel microalloyed with niobium10.1016/j.msea.2018.01.085 ↗
30. Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process10.1016/j.msea.2016.03.097 ↗
31. Microstructures and mechanical properties of surface and center of carburizing 23Cr2Ni2Si1Mo steel subjected to low-temperature austempering10.1016/j.msea.2016.05.084 ↗
32. Microstructures and properties of a novel carburizing nanobainitic bearing steel10.1016/j.msea.2020.139086 ↗
33. Grain size effects on the austenitization process in a nanostructured ferritic steel10.1016/j.actamat.2011.03.006 ↗
34. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
35. The printability, microstructure, crystallographic features and microhardness of selective laser melted Inconel 718 thin wall10.1016/j.matdes.2018.07.007 ↗
36. Mechanisms of exceptional ductility of magnesium single crystal during deformation at room temperature: Multiple twinning and dynamic recrystallization10.1016/j.actamat.2014.04.066 ↗
37. Lai FQ, Qu SG, Lewis R, Slatter T, Fu WL, Li XQ. The influence of ultrasonic surface rolling on the fatigue and wear properties of 23-8N engine valve steel Int J Fatigue 2019;125:299-313. https://doi.org/10.1016/j.ijfatigue.2019.04.010.10.1016/j.ijfatigue.2019.04.010 ↗
38. Effect of ultrasonic nanocrystal surface modification on elevated temperature residual stress, microstructure, and fatigue behavior of ATI 718Plus alloy10.1016/j.ijfatigue.2018.01.017 ↗
39. Surface nanocrystallization of 17–4 precipitation-hardening stainless steel subjected to ultrasonic surface rolling proces10.1016/j.msea.2018.04.033 ↗
40. Residual stresses and fracture mechanics analysis of a crack in welds of high strength steels10.1016/j.engfracmech.2006.08.012 ↗
41. Experimental study on macro and microstress state, microstructural evolution of austenitic and ferritic steel processed by shot peening
42. Effects of decarburization on the wear resistance and damage mechanisms of rail steels subject to contact fatigue10.1016/j.wear.2016.07.013 ↗
43. A new proposed Weibull distribution of inclusion size and its correlation with rolling contact fatigue life of an extra clean bearing steel10.1016/j.ijfatigue.2019.04.031 ↗
44. Tribological behaviour of shot peened Cu-Ni austempered ductile iron10.1016/j.wear.2012.12.027 ↗
45. Effect of shot peening residual stresses and surface roughness on fretting fatigue strength of Al 7075–T65110.1016/j.triboint.2019.106004 ↗
46. Zeng DF, Xu T, Liu WD, Lu LT, Zhang JW. Gong YH. Investigation on rolling contact fatigue of railway wheel steel with surface defect. Wear 2020;446:203207. https://doi.org/10.1016/j.wear.2020.203207.10.1016/j.wear.2020.203207 ↗
47. Effect of ultrasonic surface rolling process on impact-sliding wear behavior of the 690 alloy