Fatigue life and damage evolution in woven GFRP angle ply laminates
Source abstract
Abstract
Abstract In this study, fatigue behaviour of angle plies woven glass fiber reinforced polymer (GFRP) composite laminates has been investigated. Tension-tension fatigue tests were carried out under different maximum applied stresses that varied in the range of 50-90% of the respective ultimate strength of the laminates. Damage development in the form of debond zones and their growth was monitored. The results of the study are presented in terms of stress–strain curve, Wӧhler curve, delamination growth, total dissipated energy, dynamic modulus, and creep strain, respectively. (0°/90°) and ±15° laminate witnessed global damage while localized damage occurred in (±30°)8, (±45°)8 laminate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Fatigue behaviour of FRP composites and CNT-Embedded FRP composites: A review10.1002/pc.24177 ↗
2. Fatigue damage analysis of fiber-reinforced polymer composites—A review10.1177/0731684418754713 ↗
3. Tan Z. Paper: Nondestructive Evaluation. In: Buschow KHJ, Cahn RW, Flemings MC, Ilschner B, Kramer EJ, Mahajan S, et al., editors. Encyclopedia of materials: science and technology, Oxford: Elsevier; 2001, p. 1–5. https://doi.org/10.1016/B0-08-043152-6/01180-3.10.1016/B0-08-043152-6/01180-3 ↗
4. Electrospinning of polymer nanofibers: Effects on oriented morphology, structures and tensile properties10.1016/j.compscitech.2010.01.010 ↗
5. Effect of pristine MWCNTs on the fatigue life of GFRP laminates-an experimental and statistical evaluation10.1016/j.compositesb.2019.05.069 ↗
6. Mechanical properties of woven GFRP angle ply laminates: A statistical analysis based on two parameters weibull distribution
7. Effect of stacking angles on mechanical properties and damage propagation of plain woven carbon fiber laminates10.1088/2053-1591/aab332 ↗
8. The effect of frequency on tension-tension fatigue behaviour of unidirectional and woven fabric graphite-epoxy composites10.1080/15376494.2018.1432814 ↗
9. Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP10.1016/j.ijfatigue.2015.01.014 ↗
10. Vallons KAM. 12 - Fatigue of non-crimp fabric composites. In: Carvelli V, Lomov SV, editors. Fatigue of textile composites, Cambridge, Woodhead Publishing; 2015, p. 275–93. https://doi.org/10.1016/B978-1-78242-281-5.00012-2.10.1016/B978-1-78242-281-5.00012-2 ↗
11. Fatigue fracture mechanisms and fractography of of short- glass fibre-reinforced polyamide 610.1023/A:1018634530869 ↗
12. 10 - Woven-fibre thermoset composites
13. Reifsnider · 1991
14. Harris B, Fatigue in composites. Cambridge: Woodhead Publishing; 2003. https://doi.org/10.1533/9781855738577.10.1533/9781855738577 ↗
15. Lagace L, ed., STP1012-EB composite materials: fatigue and fracture, second volume. West Conshohocken, PA: ASTM International; 1989. https://doi.org/10.1520/STP1012-EB.10.1520/STP1012-EB ↗
16. Vassilopoulos AP, Keller T. Fatigue of fiber-reinforced composites. London: Springer; 2011. https://doi.org/10.1007/978-1-84996-181-3.10.1007/978-1-84996-181-3 ↗
17. Comparison of mechanical properties of unidirectional and woven carbon, glass and aramid fiber reinforced epoxy composites10.12693/APhysPolA.132.879 ↗
18. Curtis PT. A comparison of fatigue performance of woven and non-woven CFRP laminates in reversed axial loading, 1987;9:67–78. https://doi.org/10.1016/0142-1123(87)90047-8.10.1016/0142-1123(87)90047-8 ↗
19. Byun JH, Chou TW. 1.23 - Mechanics of Textile Composites. In: Kelly A, Zweben C, editors. Comprehensive composite materials, Oxford: Pergamon; 2000, p. 719–61. https://doi.org/10.1016/B0-08-042993-9/00059-0.10.1016/B0-08-042993-9/00059-0 ↗
20. The tensile fatigue behaviour of a glass-fiber reinforced plastic composite using a hybrid-toughened epoxy matrix10.1177/0021998309360943 ↗
21. Fatigue damage in angle-ply GFRP laminates under tension-tension fatigue10.1016/j.ijfatigue.2017.12.015 ↗
22. Interrupted tension-tension fatigue behaviour of angle-ply GFRP composite laminates10.1016/j.ijfatigue.2018.05.001 ↗
23. Stress ratio effect on tension-tension fatigue behaviour of angle-ply GFRP laminates10.1016/j.ijfatigue.2019.04.037 ↗
24. Self-heating of plastics during cyclic defformation10.1007/BF00858807 ↗
25. Effectiveness of short and straight carbon nanotubes on dispersion state and static/dynamic mechanical properties of woven glass fibre-reinforced polymer laminates
26. Benaarbia A, Chrysochoos A, Robert G. Thermomechanical behaviour of PA6.6 composites subjected to low cycle fatigue. Compos Part B: Eng. 2015;76:52–64. https://doi.org/10.1016/j.compositesb.2015.02.011.10.1016/j.compositesb.2015.02.011 ↗
27. Fatigue performance of a cold-curing structural epoxy adhesive subjected to moist environments10.1016/j.ijfatigue.2017.06.022 ↗
28. Mean stress/strain effect on fatigue behaviour of an epoxy resin10.1016/j.ijfatigue.2006.12.009 ↗
29. The effects of creep and fatigue stress ratio on the long-term behaviour of angle-ply CFRP10.1016/S0263-8223(02)00084-3 ↗
30. Creep effects on tension-tension fatigue behaviour of angle-ply GFRP composite laminates10.1016/j.ijfatigue.2019.02.010 ↗
31. ASTM International. ASTM D3171-15 Standard test methods for constituent content of composite materials. West Conshohocken, PA; ASTM International; 2015. https://doi.org/10.1520/D3171-15.10.1520/D3171-15 ↗
32. ASTM International. ASTM D3039/D3039M-17. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken, PA; ASTM International; 2017. https://doi.org/10.1520/D3039_D3039M-17.10.1520/D3039_D3039M-17 ↗
33. ASTM International. ASTM D3479/D3479M-19 standard test method for tension-tension fatigue of polymer matrix composite materials. West Conshohocken, PA: ASTM International; 2019. https://doi.org/10.1520/D3479_D3479M-19.10.1520/D3479_D3479M-19 ↗
34. McEnteggart I. Extensometers. In: Sharpe WN, editor. Springer handbook of experimental solid mechanics, Boston, MA: Springer US; 2008, p. 335–46. https://doi.org/10.1007/978-0-387-30877-7_13.10.1007/978-0-387-30877-7_13 ↗
35. Schijve J, ed., Fatigue and scatter. In: Fatigue of structures and materials, Netherlands, Dordrecht, Springer; 2009, pp. 373–394. https://doi.org/10.1007/978-1-4020-6808-9_12.10.1007/978-1-4020-6808-9_12 ↗
36. Off-axis fatigue behaviour of plain weave carbon/epoxy fabric laminates at room and high temperatures and its mechanical modeling10.1016/j.compositesa.2005.07.003 ↗
37. Experimental and numerical investigation on mechanical behaviours of woven fabric composites under off-axial loading10.1016/j.ijmecsci.2018.03.030 ↗
38. Tensile fatigue behaviour of glass plain-weave fabric composites in on- and off-axis directions10.1016/S1359-835X(01)00053-7 ↗
39. Dharan CKH. Fatigue Failure Mechanisms in a Unidirectionally Reinforced Composite Material. In: Hancock JR, editor. Fatigue of Composite Materials, West Conshohocken, PA: ASTM International; 1975, p. 171–88. https://doi.org/10.1520/STP33172S.10.1520/STP33172S ↗