Effect of residual stresses on fatigue strength of high strength steel sheets with punched holes
Source abstract
Abstract
Abstract The effect of residual stresses on the reverse bending fatigue strength of steel sheets with punched holes was studied for steels with tensile strength grades of 540 MPa and 780 MPa. Tensile and compressive residual stresses were induced around the punched holes. Heat treatment of the specimens with punched holes at 873 K for 1 h decreased the residual stresses around the holes and improved the fatigue strength of the sheets. This result means that the tensile residual stresses induced in the sidewalls of the holes and near the hole edges by punching reduced fatigue strength. The effect of the residual stresses on the fatigue limits of the edges was estimated by the modified Goodman relation using the residual stresses after cyclic loading and the ultimate tensile strength at the fatigue crack initiation sites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Sohmshetty R, Mallela K. Advanced high strength steels for chassis structures. SAE technical paper 2008-01-0854; 2008.10.4271/2008-01-0854 ↗
2. Tetsuo Shimizu, Yoshimasa Funakawa, Shinjiro Kaneko. High strength steel sheets for automobile suspension and chassis use – high strength hot-rolled steel sheets with excellent press formability and durability for critical safety parts – JFE technical report No. 4; November 2004. p. 25–31.
3. ASM handbook vol. 19. Fatigue and fracture.
4. ASM handbook vol. 14B. Metalworking: sheet forming.
5. Influence of shearing and punching on the fatigue strength of hot rolled steel sheet
6. Residual stress analysis of punched holes in 6013 aluminum alloy commercial vehicle side rails10.4271/2010-01-1909 ↗
7. Kazuo Toyama, Masato Kurita. Improvement and evaluation of fatigue strength in hot-rolled plate for automobile road wheels. MD-vol. 28. Impact of improved material quality on properties, product performance, and design ASME 1991. p. 185–95.
8. Fatigue strength of high strength dual-phase steel sheet10.1016/0142-1123(85)90037-4 ↗
9. Influence of yield ratio on the fatigue strength of steel sheet
10. Effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels10.1016/j.jmatprotec.2013.05.003 ↗
11. Andre Galtier, Philippe Cugy, Eddy Maronne, Yuichi Yoshida, Atsushi Seto, Jean-Louis Robert. Integration of process operation in the fatigue calculation of sheets structural parts. IBEC2003 (2003.10) JSAE 20037160, SAE 2003-01-2879.10.4271/2003-01-2879 ↗
12. Kunikazu Tomita, Tsuyoshi Shiozaki, Toshiaki Urabe, Akihide Yoshitake. Development of 780 MPa grade high strength hot rolled steel sheet. In: Seoul 2000 FISITA world automotive congress, F2000A041; June 12–15, 2000. Seoul, Korea.10.4271/2000-01-0308 ↗
13. Concurrent influence of an increase in tensile strength and thickness reduction on fatigue strength of hot rolled steel10.2355/isijinternational.34.285 ↗
14. Raj B Thakkar, Rashmikant P. Shah, Virginia Vanark. Effects of hole making processes and surface conditioning on fatigue behavior of 6061-T6 aluminum. SAE technical papers 2000-01-0783.10.4271/2000-01-0783 ↗
15. Sean Fleming. Fatigue crack growth for typical CV siderail hole-making processes applied to heat-treated steel (MET1123) and ultra high strength low alloy steel (120XF). SAE technical papers 2009-01-2863.10.4271/2009-01-2863 ↗
16. Peterson · 1974
17. Hosford · 2005
18. SAE J 417-1983 Hardness Tests And Hardness Number Conversions.
19. Effect of shot peening variables and residual stresses on fatigue life of leaf spring specimens
20. Relief of residual stresses by single fatigue cycle
21. Kodama S. The behavior of residual stress during fatigue stress cycles. In: Proceedings of the international conference on mechanical behavior of metals II. Kyoto: Society of Material Science 1972;2:111–8.