RETRACTED: Reliability analysis of fatigue crack growth for rail steel under variable amplitude service loading conditions and wear
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
Abstract The purpose of this paper is to investigate the effect of variable amplitude service loading conditions and wear phenomenon on reliability analysis for rail steel. For this purpose, the rail with the exact geometry of the profile in the railway systems and the boundary element method has been used. Also, the geometry correction functions of the five cracks, as a function of a crack size are determined by using nonlinear regression analysis estimating the statistical descriptors of the five geometry correction functions. Fatigue reliability is evaluated for each failure mode due to multiple site fatigue cracks propagation in rail steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Railway Engineering and Dynamics · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Three-dimensional simulation of rolling contact fatigue crack growth in UIC60 rails10.1080/10402004.2015.1134738 ↗
2. Mechanics of a fatigue crack nucleation mechanism10.1016/0022-5096(69)90006-4 ↗
3. A new model for initiation and growth of fatigue cracks10.1179/030634575790444423 ↗
4. An engineering model for prediction of rolling contact fatigue of railway wheels10.1046/j.1460-2695.2002.00535.x ↗
5. On the Dang Van fatigue limit in rolling contact fatigue10.1016/j.ijfatigue.2005.11.002 ↗
6. A comparison of multiaxial fatigue criteria as applied to rolling contact fatigue10.1016/j.triboint.2010.06.003 ↗
7. On the application of Dang Van criterion to rolling contact fatigue10.1016/j.wear.2005.03.007 ↗
8. Prediction of fatigue crack propagation and fractography of rail steel10.1016/j.tafmec.2019.03.016 ↗
9. An applied method for fatigue life assessment of engineering components using rigid-insert crack closure model10.1016/j.engfracmech.2018.10.034 ↗
10. Masoudi Nejad · 2013
11. Numerical study on rolling contact fatigue in rail steel under the influence of periodic overload10.1016/j.engfailanal.2020.104624 ↗
12. Effect of periodic overloads and spectrum loading on fatigue life and microstructure in a Grade 900A rail steel10.1016/j.tafmec.2020.102796 ↗
13. The effects of periodic overloads on fatigue crack growth in a pearlitic Grade 900A steel used in railway applications10.1016/j.engfailanal.2020.104687 ↗
14. Fatigue crack growth behavior of rail steel under mode I and mixed mode loadings10.1016/S0921-5093(02)00052-7 ↗
15. Fatigue crack growth in a welded rail under the influence of residual stresses10.1016/j.engfracmech.2004.04.009 ↗
16. Mode II fatigue failures at butt-welds10.1016/j.engfailanal.2004.02.004 ↗
17. Wheel/rail rolling contact fatigue – Probe, predict, prevent10.1016/j.wear.2013.12.004 ↗
18. A re-examination of rolling contact fatigue experiments by Clayton and Su with suggestions for surface durability calculations10.1016/S0043-1648(03)00408-3 ↗
19. Surface initiated fatigue of pearlitic and bainitic steels under water lubricated rolling/sliding contact10.1016/S0043-1648(96)07250-X ↗
20. A modified model for the estimation of fatigue life derived from random vibration theory10.1016/S0266-8920(98)00008-3 ↗
21. Probabilistic model on stochastic fatigue damage10.1016/S0142-1123(00)00030-X ↗
22. Multiaxial fatigue assessment of friction stir welded tubular joints of Al 6082–T610.1016/j.ijfatigue.2016.08.010 ↗
23. Experimental and numerical investigation of fatigue crack growth behavior and optimizing fatigue life of riveted joints in Al-alloy 2024 plates10.1016/j.tafmec.2020.102669 ↗
24. G. Lesiuk, P. Kucharski, J.A.F.O. Correia, A.M.P.D. Jesus, C. Rebelo, L.S.d. Silva, Mixed mode (I + II) fatigue crack growth in puddle iron, Engineering Fracture Mechanics, Vol. In Press, pp. 2017.10.1016/j.engfracmech.2017.05.002 ↗
25. Analysis of fatigue crack growth under mixed-mode loading conditions for a pearlitic Grade 900A steel used in railway applications10.1016/j.engfracmech.2021.107672 ↗
26. Fatigue performance prediction of Al-alloy 2024 plates in riveted joint structure10.1016/j.engfailanal.2021.105439 ↗
27. An implementation of reliability analysis in the conceptual design phase of drive trains10.1016/S0951-8320(01)00041-2 ↗
28. Fatigue assessment of a riveted shear splice based on a probabilistic model10.1016/j.ijfatigue.2009.09.004 ↗
29. Mohabeddine, Anis, José Correia, Pedro Aires Montenegro, Abílio De Jesus, José Miguel Castro, and Filippo Berto. “Probabilistic SN curves for CFRP retrofitted steel details.” International Journal of Fatigue 148 (2021): 106205.10.1016/j.ijfatigue.2021.106205 ↗
30. Computational framework for multiaxial fatigue life prediction of compressor discs considering notch effects10.1016/j.engfracmech.2018.08.009 ↗
31. Probabilistic Physics of Failure-based framework for fatigue life prediction of aircraft gas turbine discs under uncertainty10.1016/j.ress.2015.10.002 ↗
32. Probabilistic modeling and simulation of multiple surface crack propagation and coalescence10.1016/j.apm.2019.09.045 ↗
33. An investigation on fatigue behavior of AA2024 aluminum alloy sheets in fuselage lap joints10.1016/j.engfailanal.2021.105457 ↗
34. Practical design procedures using reliability based optimization
35. Madsen, H., Sorensen, J.D., Olesen, R., “Optimal inspection planning for fatigue damage of offshore structures”, in: A.-S. Ang, M. Shinozuka, G. Schueller, (Eds.), Proceedings of the Fifth International Conference on Structural Safety and Reliability (ICOSSAR’89), vol. 3, San Francisco, 2099–2106, 1989.
36. A bayesian evaluation of simulation models of multiple-site fatigue crack10.1016/S0266-8920(01)00016-9 ↗
37. Reliability evaluation and optimization of imperfect inspections for a component with multi-defects10.1016/j.ress.2005.11.003 ↗
38. Peng, Xuan, Sivakumar Kulasegaram, S. C. Wu, and Stephane Pierre Alain Bordas. “An extended finite element method (XFEM) for linear elastic fracture with smooth nodal stress.” Computers & Structures 179 (2017): 48-63.10.1016/j.compstruc.2016.10.014 ↗
39. The virtual node polygonal element method for nonlinear thermal analysis with application to hybrid laser welding10.1016/j.ijheatmasstransfer.2013.08.062 ↗
40. A combined virtual element method and the scaled boundary finite element method for linear elastic fracture mechanics10.1016/j.enganabound.2019.12.008 ↗
41. An adaptively refined XFEM with virtual node polygonal elements for dynamic crack problems10.1007/s00466-018-1553-1 ↗
42. Application of the element-free Galerkin meshless method to 3-D fracture mechanics problems10.1016/j.engfracmech.2005.06.002 ↗
43. Thermal crack growth-based fatigue life prediction due to braking for a high-speed railway brake disc10.1016/j.ijfatigue.2016.02.024 ↗
44. A review of the scaled boundary finite element method for two-dimensional linear elastic fracture mechanics10.1016/j.engfracmech.2017.10.016 ↗
45. Fracture mechanics analysis of bimaterial interface cracks using the generalized finite difference method10.1016/j.tafmec.2021.102942 ↗
46. Microstructural analysis and fatigue fracture behavior of rail steel10.1080/15376494.2018.1472339 ↗
47. Masoudi Nejad, R., 2017. “Three-dimensional analysis of rolling contact fatigue crack and life prediction in railway wheels and rails under residual stresses and wear”. Ph. D. Thesis, Ferdowsi University of Mashhad, Mashhad.
48. Microstructure and fatigue fracture mechanism for a heavy-duty truck diesel engine crankshaft
49. Masoudi Nejad, R., and Zhiliang L., 2020. “Effect of wear on stress intensity factor of rail steel using numerical modeling”. In 3rd International Conference on Electrical, Computer and Mechanical Engineering, Iran.
50. Effect of wear on rolling contact fatigue crack growth in rails10.1016/j.triboint.2015.08.035 ↗
51. Rolling contact fatigue analysis of rails under the influence of residual stresses induced by manufacturing
52. Stephens, R.I., Fatemi, A., Stephens, R.R., Fuchs, H.O., “Metal datigue in engineering”, John Wiley & Sons Inc, Ed. 2, New York, 2001.
53. Bach-Gansmo, O., C. A. Carlsen, and T. Moan. “Fatigue assessment of hull girder for ship type floating production vessels.” Proceedings of the mobile offshore structure. Elsevier Science Limited, (1987).
54. Reliability of maintained ship hulls subjected to corrosion and fatigue under combined loading10.1016/S0143-974X(99)00016-4 ↗
55. Fatigue reliability assessment of a complex welded structure subjected to multiple cracks10.1016/j.engstruct.2013.06.011 ↗
56. Generalised second moment reliability index10.1080/03601217908905328 ↗
57. Railway vehicle derailment in curve due to wear