An investigation of fretting fatigue behavior and mechanism in 17-4PH stainless steel with gradient structure produced by an ultrasonic surface rolling process
Source abstract
Abstract
Abstract A gradient structure layer was fabricated on 17-4PH specimens using an ultrasonic surface rolling process. The separation-factor methods confirmed that residual compressive stress played a critical role in improving fretting fatigue (FF) life, while gradient nano-crystalline structure and “fish scale-like” surface topography also had a beneficial influence. Residual compressive stress could enhance crack closures and reduce effective tensile stress. Nano-grains grew, and dislocation density reduced after FF experiment, which could accommodate an externally applied strain and neutralize any stress concentration. Additionally, the “fish scale-like” topography reduced total contact area between the specimen surface and fretting pad, which alleviated surface damage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal and Thin Film Mechanics · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Effects of ultrasonic nanocrystalline surface modification (UNSM) technique on the tribological behavior of sintered Cu-based alloy10.1016/j.triboint.2013.12.003 ↗
2. The effects of ultrasonic nanocrystal surface modification temperature on the mechanical properties and fretting wear resistance of Inconel 690 alloy10.1016/j.apsusc.2018.01.293 ↗
3. The effects of multiple re-shot peening on fretting fatigue behavior of Al7075-T610.1016/j.surfcoat.2010.06.014 ↗
4. Effects of shot-peening on fretting fatigue crack growth behavior in Ti-6Al-4V10.1111/j.1475-1305.2008.00591.x ↗
5. Influence of plasma molybdenizing and shot-peening on fretting damage behavior of titanium alloy10.1016/j.apsusc.2016.08.146 ↗
6. Stress gradient effect on crack initiation in fretting using a multiaxial fatigue framework10.1016/j.ijfatigue.2010.06.004 ↗
7. Effect of fretting wear on very high cycle bending fatigue behaviors of FV520B steel10.1016/j.triboint.2016.06.033 ↗
8. Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail joint specimens10.1016/j.ijfatigue.2017.10.020 ↗
9. Finite element simulation of the influence of fretting wear on fretting crack initiation in press-fitted shaft under rotating bending10.1016/j.wear.2018.01.008 ↗
10. Modification of fretting fatigue behavior of AL7075–T6 alloy by the application of titanium coating using IBED technique and shot peening10.1016/j.triboint.2008.05.006 ↗
11. Investigation on the fretting fatigue behaviors of Ti-6Al-4V dovetail joint specimens treated with shot-peening10.1016/j.wear.2016.12.004 ↗
12. Nanomaterials Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
13. Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer10.1016/j.actamat.2014.12.057 ↗
14. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
15. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
16. Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought magnesium alloy AZ8010.1016/j.scriptamat.2005.01.026 ↗
17. Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility10.1016/j.msea.2014.06.114 ↗
18. Influence of ultrasonic surface rolling on microstructure and wear behavior of selective laser melted Ti-6Al-4V Alloy10.3390/ma10101203 ↗
19. Enhanced surface properties of austenitic stainless steel by electropulsing-assisted ultrasonic surface rolling process10.1016/j.surfcoat.2015.10.026 ↗
20. Microstructure and surface properties of 17–4PH stainless steel by ultrasonic surface rolling technology10.1016/j.surfcoat.2017.04.052 ↗
21. Effects of Ultrasonic Nanocrystal Surface Modification (UNSM) on residual stress state and fatigue strength of AISI 30410.1007/s11665-009-9445-3 ↗
22. Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing10.1016/j.apsusc.2008.06.034 ↗
23. Effect of the Ultrasonic Surface Rolling Process on the Fretting Fatigue Behavior of Ti-6Al-4V Alloy10.3390/ma10070833 ↗
24. Evolution of fretting fatigue damage and relaxation of residual stress in shot-peened Ti-6Al-4V10.1007/s11661-005-0012-8 ↗
25. Effects of the different frequencies and loads of ultrasonic surface rolling on surface mechanical properties and fretting wear resistance of HIP Ti–6Al–4V alloy10.1016/j.apsusc.2016.07.120 ↗
26. On the effect of shot-peening on fretting fatigue of Al7075-T6 under cyclic normal contact loading10.1016/j.surfcoat.2017.08.067 ↗
27. Experimental results in fretting fatigue with shot and laser peened Al 7075–T651 specimens10.1016/j.ijfatigue.2011.12.014 ↗
28. Finite element analysis of shot-peening effect on fretting fatigue parameters10.1016/j.triboint.2010.11.023 ↗
29. Behaviour of shot peening combined with WC–Co HVOF coating under complex fretting wear and fretting fatigue loading conditions10.1016/j.surfcoat.2006.08.094 ↗
30. Investigation into effects of re-shot-peening on fretting fatigue behavior of Ti–6Al–4V10.1016/j.msea.2004.08.040 ↗
31. Effects of shot-peening on fretting-fatigue behavior of Ti-6Al-4V10.1115/1.1448323 ↗
32. Microstructure and mechanical properties of laser forming repaired 17–4PH stainless steel10.1016/j.msea.2012.05.095 ↗
33. Sequential nucleation of phases in a 17–4PH steel: microstructural characterisation and mechanical properties10.1016/j.actamat.2016.11.052 ↗
34. Microstructure and hardness investigation of 17–4PH stainless steel by laser quenching10.1016/j.msea.2011.12.004 ↗
35. Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17–4PH stainless steel10.1016/j.matlet.2018.11.107 ↗
36. High strain rate compressive deformation behavior of an additively manufactured stainless steel
37. Effects of atomizing media and post processing on mechanical properties of 17–4 PH stainless steel manufactured via selective laser melting
38. The microstructure evolution of type 17–4PH stainless steel during long-term aging at 350°C10.1016/j.nucengdes.2006.03.017 ↗
39. The spinodal decomposition in 17–4PH stainless steel subjected to long-term aging at 350 °C10.1016/j.matchar.2007.04.018 ↗
40. Friction and wear reduction in copper with a gradient nano-grained surface layer10.1021/acsami.8b01205 ↗
41. Influence of different shot peening treatments on surface state and fatigue behaviour of Al 6063 alloy10.1016/j.engfracmech.2017.03.017 ↗
42. Nanoscale surface modification of AISI 316L stainless steel by severe shot peening10.1016/j.matdes.2016.03.162 ↗
43. Effect of surface roughness on the fretting fatigue behaviour of EN45A spring steel10.1243/09544054JEM299 ↗
44. Surface nanocrystallization of 17–4 precipitation-hardening stainless steel subjected to ultrasonic surface rolling process10.1016/j.msea.2018.04.033 ↗
45. Nanocrystallization mechanism of beta phase in Ti-6Al-4V subjected to severe plastic deformation10.1016/j.msea.2016.05.088 ↗
46. Grain size dependent strain rate sensitivity in nanocrystalline body-centered cubic metal thin films10.1016/j.msea.2014.04.080 ↗
47. Shen B-l. The effect of microstructural evolution on hardening behavior of type 17–4PH stainless steel in long-term aging at 350 °C10.1016/j.matchar.2006.02.004 ↗
48. Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17–4PH stainless steel10.1016/j.matdes.2018.07.015 ↗
49. Surface severe plastic deformation induced solute and precipitate redistribution in an Al-Cu-Mg alloy10.1016/j.jallcom.2018.09.226 ↗
50. Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys10.1016/j.actamat.2018.12.040 ↗
51. Analysis of plastic strain-enhanced diffusivity in nanocrystalline iron by atomistic simulation10.1063/1.5085659 ↗
52. Diffusion behavior of Cr in gradient nanolaminated surface layer on an interstitial-free steel10.1016/j.jmst.2018.09.043 ↗
53. A molecular dynamics study of self-diffusion in the cores of screw and edge dislocations in aluminum10.1016/j.actamat.2009.07.048 ↗
54. Comparative studies of constitutive properties of nanocrystalline and bulk iron during compressive deformation10.1016/j.actamat.2011.02.013 ↗
55. Nanocrystalline structure formation in carbon steel introduced by high speed drilling10.1016/j.msea.2006.07.036 ↗
56. XRD investigation of microstructure strengthening mechanism of shot peening on laser hardened 17–4PH10.1016/j.msea.2011.03.098 ↗
57. Surface nanocrystallization of 3Cr13 stainless steel induced by high-current pulsed electron beam irradiation10.1155/2013/603586 ↗
58. Influences of grain size and grain boundary segregation on mechanical behavior of nanocrystalline Ni10.1016/j.msea.2009.12.005 ↗
59. Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel10.1016/j.actamat.2016.09.041 ↗
60. Investigation of rolling contact fatigue lives of Fe–Cr alloy coatings under different loading conditions10.1016/j.surfcoat.2009.09.035 ↗
61. Effect of severe shot peening on microstructure and fatigue strength of cast iron10.1016/j.ijfatigue.2013.08.022 ↗
62. Torsion fatigue behavior of pure titanium with a gradient nanostructured surface layer10.1016/j.msea.2015.09.104 ↗
63. Influences of surface grain size and gradient variation along depth on fatigue life of metallic materials10.1016/j.matdes.2012.07.026 ↗
64. Residual stresses and fretting fatigue10.1016/S0043-1648(98)00342-1 ↗
65. Stress intensity factor solutions for fretting fatigue using stress gradient factor10.1016/j.engfracmech.2017.10.031 ↗
66. The effects of ultrasonic nanocrystal surface modification on the fatigue performance of 3D-printed Ti6410.1016/j.ijfatigue.2017.05.019 ↗
67. A new investigation on the effect of re-shot peening on fretting fatigue behavior of A17075–T610.1080/10402004.2013.812761 ↗
68. Analysis of fatigue resistance improvements via surface severe plastic deformation10.1016/j.ijfatigue.2007.10.010 ↗
69. Effects of fretting fatigue on the residual stress of shot peened Ti–6Al–4V samples10.1016/j.msea.2005.02.028 ↗
70. Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature10.1016/j.ijfatigue.2008.10.004 ↗
71. Microstructural analysis of orientation-dependent recovery and recrystallization in a modified 9Cr-1Mo steel deformed by compression at a high strain rate10.1007/s11661-016-3626-0 ↗
72. Biaxial tension-torsion fatigue behavior of gradient nano-grained pure titanium fabricated by surface nanocrystallization10.1016/j.msea.2017.05.031 ↗
73. Improvement of low-cycle fatigue resistance in TWIP steel by regulating the grain size and distribution10.1016/j.actamat.2017.05.004 ↗
74. Effect of grain size and hardness on fretting wear behavior of Inconel 600 alloys10.1016/j.triboint.2014.08.005 ↗