Effect of shot peening and vibration finishing on the fatigue behavior of TC17 titanium alloy at room and high temperature
Source abstract
Abstract
Abstract The effect of shot peening (SP) and vibration finishing (VF) on the fatigue performance of TC17 alloy at room-temperature was investigated. Meanwhile, to match the high-temperature service environment of the blade, the thermal exposure test and high-temperature fatigue test were also performed. The improvement in fatigue performance at room-temperature by SP + VF process was more than that by SP alone. After thermal exposure at 300 °C for 100 h, the high-temperature (300 °C) fatigue strength of the composite-treated sample remained 18.2% higher than that of the substrate. This is mainly because that SP + VF can induce lower surface roughness and remaining relatively stable gradient microstructure and compressive stress residual layer compared with SP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti-6Al-4V at elevated temperatures up to 550 °C10.1016/j.ijfatigue.2012.03.008 ↗
2. Enhanced fatigue behavior of powder metallurgy Ti-6Al-4V alloy by applying ultrasonic impact treatment10.1016/j.msea.2015.06.072 ↗
3. On the influence of mechanical surface treatments-deep rolling and laser shock peening-on the fatigue behavior of Ti-6Al-4V at ambient and elevated temperatures10.1016/S0921-5093(03)00069-8 ↗
4. Gradient nanostructure evolution and phase transformation of α phase in Ti-6Al-4V alloy induced by ultrasonic surface rolling process10.1016/j.msea.2018.10.098 ↗
5. Surface nanocrystallization of body-centered cubic beta phase in Ti-6Al-4V alloy subjected to ultrasonic surface rolling process10.1016/j.surfcoat.2019.01.045 ↗
6. Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy10.1016/j.ijfatigue.2019.04.005 ↗
7. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment10.1016/j.scriptamat.2006.01.049 ↗
8. M. Jamesh, T.S.N. Sankara Narayanan, P.K. Chu, I.S. Park, M.H. Lee, Effect of surface mechanical attrition treatment of titanium using alumina balls: surface roughness, contact angle and apatite forming ability, Frontiers of Materials Science, 7(3) (2013) 285-294.10.1007/s11706-013-0208-6 ↗
9. Hardness and wear behavior of surface mechanical attrition treated titanium10.1088/2053-1591/ab0673 ↗
10. Y.G. Liu, H.M. Li, M.Q. Li, Characterization of surface layer in TC17 alloy treated by air blast shot peening, Materials & Design, (1980-2015) 65 (2015) 120-126.10.1016/j.matdes.2014.09.019 ↗
11. Surface characteristics and fatigue behavior of shot peened Inconel 71810.1016/j.ijfatigue.2018.01.005 ↗
12. Effect of shot peening residual stresses and surface roughness on fretting fatigue strength of Al 7075–T65110.1016/j.triboint.2019.106004 ↗
13. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel10.1016/S0142-1123(01)00205-5 ↗
14. A literature survey on the stability and significance of residual stresses during fatigue10.1111/j.1460-2695.2007.01102.x ↗
15. High cycle fatigue behavior of TC11 titanium alloy by shot peening strengthening
16. Effects of shot-peening and re-shot-peening on four-point bend fatigue behavior of Ti-6Al-4V10.1016/j.msea.2007.01.156 ↗
17. Surface layer properties and fatigue behavior in Al 7075–T73 and Ti-6Al-4V10.1108/17579861111135923 ↗
18. Surface integrity and fatigue analysis of shot-peening for 7055 aluminum alloy under different high-speed milling conditions10.1177/1687814016674628 ↗
19. Investigation of material removal and surface topography formation in vibratory finishing10.1016/j.procir.2014.03.048 ↗
20. Development of ultrasonic vibration assisted polishing machine for micro aspheric die and mold10.1016/S0007-8506(07)60441-7 ↗
21. The compound process of laser shock peening and vibratory finishing and its effect on fatigue strength of Ti-3.5Mo-6.5Al-1.5Zr-0.25Si titanium alloy10.1016/j.jallcom.2018.12.294 ↗
22. Effects of high frequency vibratory finishing of aerospace components10.1007/s12206-019-0333-y ↗
23. Influence of shot peening combined with vibration finishing on fatigue performance of TC4 titanium alloy
24. Effect of surface polishing treatment on the fatigue performance of shot-peened Ti-6Al-4V alloy10.1007/s40195-017-0555-x ↗
25. Influence of different surface modification treatments on surface integrity and fatigue performance of TC4 titanium alloy
26. Influence of shot peening on fatigue property of Ti-60 high temperature titanium alloy10.1179/174329407X265983 ↗
27. The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes10.1016/j.ijfatigue.2018.02.022 ↗
28. Influence of shot peening on tension-tension fatigue property of two high strength Ti alloys10.1179/174329406X122865 ↗
29. Effect of surface treatments on fatigue life of Ti-6-22-22 alloy at room and high temperatures10.1016/S0921-5093(04)00852-4 ↗
30. Strain effects on the coarsening and softening of electrodeposited nanocrystalline Ni subjected to high pressure torsion10.1016/j.scriptamat.2007.12.039 ↗
31. J. Yan, Study on Thermal stability of 0Cr18Ni9Ti stainless steel and TA17 titanium alloy after surface self nano-crystallization, in, Chongqing University, 2008.
32. H.F. Zhang, Study on thermal relaxation mechanism of residual stress on laser peened TC6 alloy after cryogenic treatment, in, JiangSu university, 2017.
33. Huang · 2015
34. Fatigue-induced evolution of nanograins and residual stress in the nanostructured surface layer of Ti-6Al-4V10.1016/j.msea.2019.138205 ↗
35. Almen intensity effect on microstructure and mechanical properties of low carbon steel subjected to severe shot peening10.1016/j.apsusc.2013.10.184 ↗
36. Effect of shot peening intensity on surface integrity and high-temperature fatigue performance of TC17 and GH4169 alloys
37. Nitriding duration reduction without sacrificing mechanical characteristics and fatigue behavior: The beneficial effect of surface nano-crystallization by prior severe shot peening10.1016/j.matdes.2013.10.015 ↗
38. Improving fatigue performance of Ti-6Al-4V alloy via ultrasonic surface rolling process10.1016/j.jmst.2019.03.036 ↗
39. On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy10.1016/j.surfcoat.2019.04.080 ↗
40. Improving the fretting and corrosion fatigue performance of 300M ultra-high strength steel using the ultrasonic surface rolling process10.1016/j.ijfatigue.2018.11.017 ↗
41. Size effect on the fatigue behaviour of IMI 829 titanium alloy under dwell conditions10.1016/0142-1123(89)90002-9 ↗
42. Notable size effects on very high cycle fatigue properties of high-strength steel10.1016/j.msea.2011.03.082 ↗
43. Probabilistic fatigue assessment for railway axles and derivation of a simple format for damage calculations10.1016/j.ijfatigue.2015.08.010 ↗
44. Geometrical scale-sensitive fatigue properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloys with α/β lamellar microstructures10.1016/j.jmst.2014.07.012 ↗