Effect of heat treatment on fatigue behavior of as-built notched Co-Cr-Mo parts produced by Selective Laser Melting
Source abstract
Abstract
In this paper Cobalt-Chromium-Molybdenum (Co-Cr-Mo) specimens produced by Selective Laser Melting (SLM) for biomedical field were studied. In particular, fatigue tests were carried out comparing as-built condition with Hot Isostatic Pressing (HIP) and a heat treatment under vacuum condition. The influence on microstructure and fatigue properties was investigated on plain specimens and with a V-notched geometry. Both vacuum heat treatment and HIP had effects on the microstructure and internal defects, which resulted in an enhancement of quasi-static and fatigue properties. Lastly, notch sensitivity and applicability of ASED failure criterion for fatigue life prediction notched specimens were evaluated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. An experimental study on micro-milling of a medical grade Co-Cr-Mo alloy produced by Selective Laser Melting10.3390/ma12132208 ↗
2. Metallic alloys in total hip arthroplasty
3. Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications10.1016/j.jmbbm.2013.01.021 ↗
4. Hanawa T. Overview of metals and applications, Metals for biomedical devices, 2nd ed. Woodhead Publishing Series in Biomaterials; 2019, p. 3–29. https://doi.org/10.1016/B978-0-08-102666-3.00001-8.10.1016/B978-0-08-102666-3.00001-8 ↗
5. Research on rapid manufacturing of CoCrMo alloy femoral component based on selective laser melting10.1007/s00170-014-6150-7 ↗
6. Evaluation of the stiffness characteristics of square pore CoCrMo cellular structures manufactured using laser melting technology for potential orthopaedic applications10.1016/j.matdes.2013.05.009 ↗
7. Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction10.1016/j.matdes.2016.11.090 ↗
8. Heterogeneous microstructures and corrosion resistance of biomedical Co-Cr-Mo alloy fabricated by electron beam melting (EBM)
9. Fatigue and life prediction for cobalt-chromium stents: a fracture mechanics analysis10.1016/j.biomaterials.2005.10.012 ↗
10. Additive manufacturing of cardiovascular CoCr stents by selective laser melting10.1016/j.matdes.2017.01.091 ↗
11. Fatigue improvement of electron beam melting-fabricated biomedical Co–Cr–Mo alloy by accessible heat treatment10.1080/21663831.2017.1396506 ↗
12. Fatigue of biomaterials: a review10.1016/S0142-1123(00)00052-9 ↗
13. Fatigue characteristics of metallic biomaterials10.1016/j.ijfatigue.2006.09.021 ↗
14. Additive manufacturing of cobalt-based dental alloys: analysis of microstructure and physicomechanical properties10.1155/2018/8213023 ↗
15. Microstructures and mechanical properties of Co-Cr dental alloys fabricated by three CAD/CAM-based processing techniques10.3390/ma9070596 ↗
16. The structural metastability of metallic alloys produced by Selective Laser Melting
17. Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting10.1016/j.msea.2018.04.048 ↗
18. Additive manufacturing of Co-Cr-Mo alloy: influence of heat treatment on microstructure, tribological, and electrochemical properties10.3389/fmech.2015.00002 ↗
19. Effect of subsequent Hot Isostatic Pressing on mechanical properties of ASTM F75 alloy produced by Selective Laser Melting10.1179/0032589915Z.000000000236 ↗
20. Electron beam melted (EBM) Co-Cr-Mo alloy for orthopaedic implant applications
21. Fatigue assessment of Ti–6Al–4V circular notched specimens produced by selective laser melting10.3390/met7080291 ↗
22. Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces10.1016/j.ijfatigue.2017.04.009 ↗
23. Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V10.1016/j.tafmec.2017.06.021 ↗
24. Effect of build thickness and geometry on quasi-static and fatigue behavior of Ti-6Al-4V produced by Electron Beam Melting
25. Inverse determination of the fatigue strain energy density control radius for conventionally and additively manufactured rounded V-notches10.1016/j.ijfatigue.2019.04.040 ↗
26. Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: a critical distance approach to defect sensitivity10.1016/j.ijfatigue.2018.12.020 ↗
27. Fatigue life estimation of additive manufactured parts in the as-built surface condition
28. Directed Energy Deposition versus wrought Ti-6Al-4V: a comparison of microstructure, fatigue behavior, and notch sensitivity10.1002/adem.201900220 ↗
29. Effect of the heat treatment on corrosion and mechanical properties of CoCrMo alloys manufactured by selective laser melting10.1108/RPJ-10-2017-0215 ↗
30. Morphology and properties of CoCrMo parts fabricated by selective laser melting10.1016/j.msea.2017.12.035 ↗
31. A review on fatigue life prediction methods for metals10.1155/2016/9573524 ↗
32. Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches10.1016/j.mser.2013.11.001 ↗
33. A review of the volume-based strain energy density approach applied to V-notches and welded structures10.1016/j.tafmec.2009.10.001 ↗
34. Berto F, Razavi N, Torgersen J. Frontiers of fracture and fatigue: Some recent applications of the local strain energy density. 2018;12(43). https://doi.org/10.3221/IGF-ESIS.43.01.10.3221/IGF-ESIS.43.01 ↗
35. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches10.1023/A:1013595930617 ↗
36. Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches10.1007/s10704-005-3943-6 ↗
37. A notch stress intensity approach applied to fatigue life predictions of welded joints with different local toe geometry10.1046/j.1460-2695.2003.00586.x ↗
38. Stress singularities resulting frolll various boundary conditions in angular corners of plates in extension10.1115/1.4010553 ↗
39. Effects of heat treatment on metal-ceramic combination of selective-laser-melted cobalt-chromium alloy
40. ISO 22674 Dentistry — Metallic materials for fixed and removable restorations and appliances Art. vol. 2004; 2004.
41. Effects of the Selective Laser Melting manufacturing process on the properties of CoCrMo single tracks10.1007/s12540-014-5011-0 ↗
42. Formation of metastable cellular microstructures in selective laser melted alloys10.1016/j.jallcom.2016.12.209 ↗
43. Banerjee, Microstructural evolution and mechanical properties of direct metal laser-sintered (DMLS) CoCrMo after heat treatment10.1007/s11661-018-4771-4 ↗
44. Understanding the residual stress in DMLS CoCrMo and SS316L using X-ray diffraction10.1016/j.prostr.2019.05.093 ↗
45. On microstructural homogenization and mechanical properties optimization of biomedical Co-Cr-Mo alloy additively manufactured by using electron beam melting
46. Microstructure, mechanical property and metal release of As-SLM CoCrW alloy under different solution treatment conditions10.1016/j.jmbbm.2015.10.019 ↗
47. Dynamic recrystallization in biomedical Co-29Cr-6Mo-0.16N alloy with low stacking fault energy10.1016/j.msea.2016.05.045 ↗
48. Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy10.1016/j.optlastec.2010.06.015 ↗
49. Effect of residual stress on recrystallization behavior of mechanically alloyed steels10.1016/j.scriptamat.2009.09.023 ↗
50. Correlation of the M23C6 precipitation morphology with grain boundary characteristics in austenitic stainless steel10.1016/S0921-5093(01)01254-0 ↗
51. Study of grain boundary character along intergranular stress corrosion crack paths in austenitic alloys10.1016/S1359-6454(01)00064-7 ↗
52. Grain-boundary engineering markedly reduces susceptibility to intergranular hydrogen embrittlement in metallic materials10.1016/j.actamat.2009.05.012 ↗
53. Cyclic deformation, crack initiation, and low-cycle fatigue
54. Nucleation and growth of twin interfaces in fcc metals and alloys
55. Twin boundaries as crack nucleation sites10.1002/crat.200410305 ↗
56. Fatigue strength of notched specimens made of Ti-6Al-4V produced by Selected Laser Melting technique
57. Notch effect and fatigue performance of Ti-6Al-4V sheets in saline environment10.1520/MPC20130025 ↗
58. Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting10.1016/j.ijfatigue.2016.05.001 ↗
59. The influence of as-built surface conditions on mechanical properties of Ti-6Al-4V additively manufactured by selective electron beam melting10.1007/s11837-015-1768-y ↗
60. Notch sensitivity and defect sensitivity under fatigue loading: two sides of the same medal10.1023/A:1007686727207 ↗
61. From Neuber’s elementary volume to Kitagawa and Atzori’s diagrams: an interpretation based on local energy10.1007/s10704-005-4393-x ↗
62. Prediction of non propagating cracks10.1016/0013-7944(79)90081-X ↗