Four stress analysis strategies to use the Modified Wöhler Curve Method to perform the fatigue assessment of weldments subjected to constant and variable amplitude multiaxial fatigue loading

Abstract The present paper investigates the different ways of using the Modified Wohler Curve Method (MWCM) to perform the fatigue assessment of steel and aluminium welded joints subjected to in-service variable amplitude (VA) multiaxial load histories. Thanks to its specific features, the above critical plane approach can efficiently be applied in terms of both nominal, hot-spot, and local quantities, that is, by using any of the stress analysis strategies suggested by the Design Recommendations of the International Institute of Welding (IIW). The MWCM can efficiently be used also along with the so-called Theory of Critical Distances applied in the form of the Point Method (PM). The accuracy of the different formalisations of the MWCM investigated in the present paper was systematically checked against a large number of experimental results taken from the literature and generated by testing, under VA biaxial nominal loading, welded samples having different geometries. Such a systematic validation exercise allowed us to prove that our multiaxial fatigue criterion is successful in designing welded joints against VA multiaxial fatigue, this holding true independently from both definition adopted to calculate the necessary stress quantities and complexity of the assessed load history.