Damage mechanisms during very high cycle fatigue of a coated and grit-blasted Ni-based single-crystal superalloy
Source abstract
Abstract
Abstract The very high cycle fatigue properties of the Ni-based single-crystal superalloy CMSX-4 coated with an MCrAlY type coating and grit-blasted were studied at 1000 °C, 20 kHz and R = -1. A recrystallized layer thicker than the size of the larger casting pores (>50 μm) drastically reduces the fatigue life without environmental influence. The recrystallized layer and roughness introduced by grit-blasting degrades the environmental resistance of the alloy and the resultant fatigue life. The fatigue life of the coated specimens is also greatly reduced from damage accumulation in the interdiffusion zone by grain boundary cracking, oxidation and internal nitridation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. High cycle fatigue in aircraft gas turbines—an industry perspective10.1007/BF00012667 ↗
2. Fatigue strength of a single crystal in the gigacycle regime10.1016/j.ijfatigue.2007.04.003 ↗
3. Ultrasonic fatigue of a single crystal Ni-base superalloy at 1000°C10.1016/j.msea.2006.08.028 ↗
4. Specimen size effects on gigacycle fatigue properties of high-strength steel under ultrasonic fatigue testing10.1016/j.scriptamat.2008.01.039 ↗
5. VHCF life evolution after microstructure degradation of a Ni-based single crystal superalloy10.1016/j.ijfatigue.2017.07.021 ↗
6. Very high cycle fatigue of Ni-based single-crystal superalloys at high temperature10.1007/s11661-018-4672-6 ↗
7. Crack initiation mechanisms during very high cycle fatigue of Ni-based single crystal superalloys at high temperature10.1016/j.actamat.2020.02.012 ↗
8. Nie B, Zhao Z, Liu S, Chen D, Ouyang Y, Hu Z, et al. Very high cycle fatigue behavior of a directionally solidified Ni-base superalloy DZ4. Materials 2018;11:98. https://doi.org/10.3390/ma11010098.10.3390/ma11010098 ↗
9. LCF, HCF and VHCF life sensitivity to solution heat treatment of a third-generation Ni-based single crystal superalloy10.1016/j.ijfatigue.2019.105247 ↗
10. Initiation and early-stage growth of internal fatigue cracking under very-high-cycle fatigue regime at high temperature10.1007/s11661-020-05633-3 ↗
11. Coatings for blade and vane applications in gas turbines10.1016/0010-938X(89)90104-2 ↗
12. The influences of heat treatments and interdiffusion on the adhesion of plasma-sprayed NiCrAlY coatings10.1016/0257-8972(95)02640-1 ↗
13. Effect of interdiffusion on mechanical and thermal expansion properties at high temperature of a MCrAlY coated Ni-based superalloy10.1016/j.surfcoat.2016.08.059 ↗
14. Gayda · 1986
15. Influence of high-temperature protective coatings on the mechanical properties of nickel-based superalloys10.1023/A:1004643311001 ↗
16. Mechanical aspects of high temperature coatings10.1016/0040-6090(83)90302-4 ↗
17. Influence of a plasma-sprayed NiCrAlY coating on the low-cycle fatigue behaviour of a directionally solidified nickel-base superalloy10.1016/S0921-5093(98)00505-X ↗
18. Effect of MCrAlY coating on the low-cycle fatigue behavior of a directionally solidified nickel-base superalloy at different temperatures10.1016/j.ijfatigue.2015.02.018 ↗
19. Effect of interface diffusion on low-cycle fatigue behaviors of MCrAlY coated single crystal superalloys10.1016/j.ijfatigue.2020.105660 ↗
20. Huang ZW, Wang ZG, Zhu S, Yuan FH, Wang FG. Effect of HVOF Sprayed MCrAlY Coating on Thermomechanical and Isothermal Fatigue Life of Superalloy M963. Key Eng Mater 2008;373–374:23–6. https://doi.org/10.4028/www.scientific.net/KEM.373-374.23.10.4028/www.scientific.net/KEM.373-374.23 ↗
21. Goldschmidt D, Paul U, Sahm PR. Porosity clusters and recrystallization in single-crystal components. Superalloys 1992 Seventh Int. Symp., TMS; 1992, p. 155–64. https://doi.org/10.7449/1992/Superalloys_1992_155_164.10.7449/1992/Superalloys_1992_155_164 ↗
22. Influence of recrystallization on high-temperature stress rupture property and fracture behavior of single crystal superalloy10.1016/j.msea.2012.04.109 ↗
23. Mechanical behavior and processing of DS and single crystal superalloys10.1007/BF03258708 ↗
24. Okazaki M, Hiura T, Suzuki T. Effect of local cellular transformation on fatigue small crack growth in CMSX-4 and CMSX-2 at high temperature. In: Pollock TM, Kissinger RD, editors., TMS; 2000, p. 505–14. https://doi.org/10.7449/2000/Superalloys_2000_505_514.10.7449/2000/Superalloys_2000_505_514 ↗
25. Damage repair in CMSX-4 alloy without fatigue life reduction penalty10.1007/s11661-004-0364-5 ↗
26. Okazaki M, Ohtera I, Harada Y, Namba K. Undesirable Effect of Local Cellular Transformation in Microstructurally-Controlled Ni-base Superalloys Subjected to Previous Damage on High Temperature Fatigue Strength and the Prevention. J Soc Mater Sci Jpn 2003;52:55–60. https://doi.org/10.2472/jsms.52.3Appendix_55.10.2472/jsms.52.3Appendix_55 ↗
27. Burgel R, Portella PD, Preuhs J. Recrystallization in single crystals of nickel base superalloys. In: Pollock TM, Kissinger RD, Bowman RR, Green KA, McLean M, Olson S, et al., editors. Superalloys 2000, vol. 5, TMS; 2000, p. 229–238.10.7449/2000/Superalloys_2000_229_238 ↗
28. High temperature durability of a bond-coatless plasma-sprayed thermal barrier coating system with laser textured Ni-based single crystal substrate10.1016/j.surfcoat.2018.01.006 ↗
29. Endommagement à haute température d’un superalliage monocristallin AM110.1051/mattech/199583120056s ↗
30. Tensile properties of a non-line-of-sight processed β-γ-γ′ MCrAlY coating at high temperature10.1016/j.surfcoat.2017.07.026 ↗
31. The influence of microstructure on the ductile to brittle transition and fracture behaviour of HVOF NiCoCrAlY coatings determined via small punch tensile testing10.1016/j.msea.2019.03.108 ↗
32. Boudot A. PhD thesis: Propriétés des revêtements de protection haute température pour pales de turbine haute pression. INP Toulouse: 1999.
33. Use of multi-step loading small punch test to investigate the ductile-to-brittle transition behaviour of a thermally sprayed CoNiCrAlY coating10.1016/j.msea.2016.10.097 ↗
34. Isothermal oxidation behaviour of NiCoCrAlYTa coatings produced by HVOF spraying and TribometTM process10.1007/s11085-013-9422-y ↗
35. Surface recrystallization in a single crystal nickel-based superalloy10.1007/BF00980749 ↗
36. Walston WS, Schaeffer JC, Murphy WH. A new type of microstructural instability in superalloys-SRZ. In: Kissinger RD, Deye DJ, Anton DL, Cetel AD, Nathal MV, Pollock TM, et al., editors. Superalloys 1996, TMS; 1996, p. 9–18.10.7449/1996/Superalloys_1996_9_18 ↗
37. Benefits of high gradient solidification for creep and low cycle fatigue of AM1 single crystal superalloy10.1016/j.msea.2015.07.045 ↗
38. The effect of casting conditions on the high-cycle fatigue properties of the single-crystal nickel-base superalloy PWA 148310.1007/s11661-007-9188-4 ↗
39. Brundidge CL, Pollock TM. Processing to fatigue properties: benefits of high gradient casting for single crystal airfoils. In: Huron ES, Reed RC, Hardy MC, Mills MJ, Montero RE, Portella PD, et al., editors. Superalloys 2012, TMS; 2012, p. 369–377.10.7449/2012/Superalloys_2012_379_385 ↗
40. Fatigue crack initiation detection by an infrared thermography method10.1111/j.1460-2695.2009.01410.x ↗
41. Study of thermal effects associated with crack propagation during very high cycle fatigue tests10.1016/j.actamat.2008.04.023 ↗
42. Effect of recrystallisation on microstructural evolution and mechanical properties of single crystal nickel based superalloy CMSX-2 Part 2 - Creep behaviour of surface recrystallised single crystal10.1179/026708303225008347 ↗
43. High temperature oxidation and γ′ depletion in the single-crystal superalloy PWA 148410.1080/09603409.2016.1180276 ↗
44. Selective oxidation and internal nitridation during high-temperature exposure of single-crystalline nickel-base superalloys10.1007/s11661-000-0051-0 ↗
45. Scale formation on the Ni-base superalloys IN 939 and IN 738 LC10.1007/BF00664797 ↗
46. Influence of coatings and hot corrosion on the fatigue behaviour of nickel-based superalloys10.1016/0040-6090(81)90006-7 ↗
47. Influence of protective coatings on the mechanical properties of CMSX-2 and Cotac 78410.1016/0025-5416(87)90093-0 ↗
48. Isothermal fatigue of an aluminide-coated single-crystal superalloy: Part I10.1007/BF02648412 ↗
49. Effect of strain rate on ductile-to-brittle transition temperature of a free-standing Pt-aluminide bond coat10.1007/s11661-011-0683-2 ↗
50. Location, location & size: defects close to surfaces dominate fatigue crack initiation10.1038/srep45239 ↗