Unified evaluation of hydrogen-induced crack growth in fatigue tests and fracture toughness tests of a carbon steel
Source abstract
Abstract
Abstract To investigate the effect of hydrogen on fatigue life characteristics and crack growth behaviors through the entire fatigue life of a carbon steel, tension-compression fatigue tests and elasto-plastic fracture toughness tests were conducted in a hydrogen gas environment under the pressures of 0.7 and 115 MPa. The fatigue tests revealed that the fatigue life and fracture morphology vary drastically with the hydrogen gas pressure. This study demonstrates that such differences can be explained by the combination of fatigue crack growth properties and fracture toughness properties in hydrogen gas at each pressure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Material Properties and Failure Mechanisms · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Hydrogen embrittlement of austenitic stainless steel10.5006/0010-9312-21.2.53 ↗
2. Effect of aqueous and hydrogen environments on fatigue crack growth in 2Ni-Cr-Mo-V rotor steel10.1179/msc.1979.13.7.429 ↗
3. A new model for hydrogen-assisted cracking (hydrogen “embrittlement”)10.1007/BF02642048 ↗
4. Slow strain rate tensile and fatigue properties of Cr-Mo and carbon steels in a 115 MPa hydrogen gas atmosphere10.1016/j.ijhydene.2015.02.098 ↗
5. Criteria for determining hydrogen compatibility and the mechanisms for hydrogen-assisted, surface crack growth in austenitic stainless steels10.1016/j.engfracmech.2015.12.023 ↗
6. Recent advances on hydrogen embrittlement of structural materials10.1007/s10704-015-0068-4 ↗
7. The relationship between crack-tip strain and subcritical cracking thresholds for steels in high-pressure hydrogen gas10.1007/s11661-012-1400-5 ↗
8. Hydrogen embrittlement understood10.1007/s11663-015-0325-y ↗
9. Defect Size dependence on threshold stress intensity for high-strength steel with internal hydrogen10.1111/ffe.12077 ↗
10. Fatigue crack propagation under gaseous hydrogen in a precipitation-hardened martensitic stainless steel10.1016/j.ijhydene.2011.04.094 ↗
11. Hydrogen embrittlement susceptibility of a weld simulated X70 heat affected Zone under H2 pressure10.1016/j.msea.2013.12.042 ↗
12. A review of hydrogen embrittlement of martensitic advanced high-strength steels10.1515/corrrev-2016-0006 ↗
13. Japan Automobile Research Institute. Technical standards for containers for compressed-hydrogen vehicle fuel device. JARI-S001 2004.
14. Japan Automobile Research Institute. Technical standards for components (valve and PRD) for compressed-hydrogen vehicle fuel device. JARI-S002 2004.
15. National Aeronautics and Space Administration. Safety standards for hydrogen and hydrogen systems. NSS1740.16. Washington, DC: Office of Safety and Mission Assurance; 1997.
16. Characteristics of fatigue life and fatigue crack growth of SCA435 steel in high-pressure hydrogen gas10.1299/kikaia.78.531 ↗
17. Wada Y, Ishigaki R, Tanaka Y, Iwadate T, Ohnishi K. Evaluation of metal materials for hydrogen fuel station. Proceedings of International Conference on Hydrogen Safety. In: Pisa; 2005.
18. Suzuki G, Oishi K, Kato A, Tokuno K, Tsuchida Y. Effect of hydrogen pre-charging on fatigue life on medium carbon steels of different purity. Tetsu to Hagane 2012;98, pp. 497–502, doi: 10.2355/tetsutohagane.98.497.10.2355/tetsutohagane.98.497 ↗
19. ASTM International. Standard test method for measurement of fracture toughness. ASTM E1820–13. West Conshohocken, PA: ASTM International; 2013.
20. Matsumoto T, Itoga H, Hirabayashi S, Kubota M, Matsuoka S. Effect of displacement velocity on elastic Plastic fracture toughness of SM490B carbon steel Plate in 0.7 MPa hydrogen gas. Trans Jpn Soc Mech Eng A 2013;79, pp. 1210–25, doi: 10.1299/kikaia.79.1210.10.1299/kikaia.79.1210 ↗
21. Hydrogen embrittlement mechanism in fatigue of austenitic stainless steels10.1007/s11661-008-9506-5 ↗
22. Matsuoka S, Tsutsumi N, Murakami Y. Effects of hydrogen on fatigue crack growth and stretch Zone of 0.08 mass%C low carbon steel pipe. Trans Jpn Soc Mech Eng A 2008:74:1528–37.10.1299/kikaia.74.1528 ↗
23. Influence of hydrogen and frequency on fatigue crack growth behavior of Cr-Mo steel10.1007/s10704-010-9560-z ↗
24. The effect of hydrogen on the mechanical properties of high purity iron I. Softening and hardening of high purity iron by hydrogen charging during tensile deformation10.1016/0025-5416(79)90191-5 ↗
25. Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
26. Bichler CH, Pippan R. Direct observation of the formation of striations. Proceedings of the International Conference on the Importance of Understanding the Fundamentals of the Fatigue Process in Counteracting Its Effects in Engineering Components and Structures: Engineering against Fatigue, 1997. Rotterdam Balkema; 1999, p. 211–8.
27. Elber · 1971 · 230
28. National Institute for Material Science. Data sheet on fatigue crack propagation properties for butt welded joints of SM50B rolled steel for welded structure. NRIM Fatigue Data Sheet 21; 1980.
29. Effects of hydrogen gas pressure and test frequency on fatigue crack growth properties of low carbon steel in 0.1−90 MPa hydrogen gas
30. Temperature effects on the mechanism of time independent hydrogen assisted fatigue crack propagation in steels10.1016/0956-7151(92)90192-H ↗
31. Modeling the fatigue crack growth of X100 pipeline steel in gaseous hydrogen10.1016/j.ijfatigue.2013.08.010 ↗
32. Elucidating the variables affecting accelerated fatigue crack growth of steels in hydrogen gas with low oxygen concentrations10.1016/j.actamat.2013.07.001 ↗
33. On one- and two-parameter analyses of short fatigue crack growth10.1016/j.ijfatigue.2006.11.012 ↗
34. The short crack problem10.1111/j.1460-2695.1982.tb01250.x ↗
35. Fatigue microcracks in a low carbon steel10.1111/j.1460-2695.1985.tb01203.x ↗
36. Fatigue crack growth of SNCM 439 steel in high pressure hydrogen at room temperature10.2472/jsms.34.709 ↗
37. Effect of high pressure hydrogen gas on crack growth of carbon steel10.2472/jsms.46.607 ↗
38. Lu Y-L, Kobayashi H. A Jmax approach to elastic-plastic fatigue crack growth in A508–3 steel. Proceedings of Sixth International Conference on Pressure Vessels Technology, Vol. 2. Beijing, China: Materials & Fabrication; 1988. p. 783–790.10.1016/B978-1-4832-8430-9.50077-0 ↗