Data driven method for predicting the effect of process parameters on the fatigue response of additive manufactured AlSi10Mg parts
Source abstract
Abstract
The fatigue response of Additive Manufacturing (AM) components is driven by manufacturing defects - whose size mainly depends on process parameters - and by the resulting microstructure - mainly affected by heat treatments and process parameters. In the paper, Machine Learning (ML) algorithms are applied to estimate the fatigue response from AM process parameters and heat treatment properties. Feed-forward neural networks (FFNN) and physics-informed neural network (PINN) algorithms are designed and validated on literature datasets of AM AlSi10Mg alloy, proving the effectiveness of physics-based ML approaches in predicting the fatigue response of AM parts. Leveraging PINN interpretability, the authors analyse the relationship between process parameters and fatigue response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Fatigue design with additive manufactured metals: issues to consider and perspective for future research10.1016/j.proeng.2018.02.002 ↗
2. Additive manufacturing in the context of structural integrity10.1016/j.ijfatigue.2016.07.005 ↗
3. Airbus approach for F&DT stress justification of Additive Manufacturing parts10.1016/j.prostr.2017.11.067 ↗
4. Additive manufacturing of fatigue resistant materials: challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
5. Defect analysis for additively manufactured materials in fatigue from the viewpoint of quality control and statistics of extremes10.1016/j.prostr.2019.12.014 ↗
6. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
7. Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing10.1016/j.matdes.2019.108091 ↗
8. Fracture–mechanical assessment of the effect of defects on the fatigue lifetime and limit in cast and additively manufactured aluminum–silicon alloys from hcf to vhcf regime10.3390/met10070943 ↗
9. A new FE post-processor for probabilistic fatigue assessment in the presence of defects and its application to AM parts10.1016/j.ijfatigue.2019.04.008 ↗
10. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
11. Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion
12. Metal fatigue: effects of small defects and nonmetallic inclusions
13. Prediction of non propagating cracks10.1016/0013-7944(79)90081-X ↗
14. Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V10.1111/ffe.13361 ↗
15. Predictive models for fatigue property of laser powder bed fusion stainless steel 316L10.1016/j.matdes.2018.02.054 ↗
16. Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components10.1016/j.tafmec.2020.102611 ↗
17. Fatigue life prediction for AlSi10Mg components produced by selective laser melting10.1016/j.ijfatigue.2019.04.015 ↗
18. A novel approach based on the elastoplastic fatigue damage and machine learning models for life prediction of aerospace alloy parts fabricated by additive manufacturing10.1016/j.ijfatigue.2020.106089 ↗
19. On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg10.1016/j.ijfatigue.2022.106841 ↗
20. Fatigue property prediction of additively manufactured Ti-6Al-4V using probabilistic physics-guided learning
21. Machine learning based very-high-cycle fatigue life prediction of Ti-6Al-4V alloy fabricated by selective laser melting
22. Physics-informed neural networks: a deep learning framework for solving forward and inverse problems involving nonlinear partial differential equations10.1016/j.jcp.2018.10.045 ↗
23. Defects in additive manufactured metals and their effect on fatigue performance: a state-of-the-art review10.1016/j.pmatsci.2020.100724 ↗
24. Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy
25. Very-high-cycle fatigue behavior of Ti-6Al-4V manufactured by selective laser melting: effect of build orientation10.1016/j.ijfatigue.2020.105628 ↗
26. Mitigation of lack of fusion defects in powder bed fusion additive manufacturing10.1016/j.jmapro.2018.10.028 ↗
27. Fatigue failures from defects in additive manufactured components: a statistical methodology for the analysis of the experimental results10.1111/ffe.13467 ↗
28. Lifetime assessment of the process-dependent material properties of additive manufactured AlSi10Mg under low-cycle fatigue loading10.1051/matecconf/202032607003 ↗
29. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg10.1016/j.actamat.2020.10.001 ↗
30. Effects of powder particle size on fatigue performance of laser powder-bed fused Ti-6Al-4V10.1016/j.prostr.2022.03.010 ↗
31. Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes10.1016/j.ijfatigue.2020.106013 ↗
32. Use of power factor and specific point energy as design parameters in laser powder-bed-fusion (L-PBF) of AlSi10Mg alloy
33. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg10.1016/j.jmatprotec.2015.02.013 ↗
34. Fatigue assessment of as-built and heat-treated Inconel 718 specimens produced by additive manufacturing including notch effects10.1111/ffe.13300 ↗
35. DP, Kingma, JL, Ba Adam: A Method for Stochastic Optimization. 3rd International Conference on Learning Representations, ICLR 2015 - Conference Track Proceedings 2014. https://doi.org/10.48550/arxiv.1412.6980.
36. Multilayer feedforward networks are universal approximators10.1016/0893-6080(89)90020-8 ↗
37. Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
38. Paolino · S-N curves in the very-high-cycle fatigue regime: statistical modeling based on the hydrogen embrittlement consideration ORIGINAL CONTRIBUTION · 2016
39. Very high cycle fatigue of nitrided 18Ni maraging steel sheet10.1016/j.ijfatigue.2014.02.003 ↗
40. Statistical models for estimating the fatigue life, the stress–life relation, and the P-S–N curves of metallic materials in Very High Cycle Fatigue: a review10.1111/ffe.13610 ↗
41. Effect of microstructure, residual stresses and building orientation on the fatigue response up to 109 cycles of an SLM AlSi10Mg alloy10.1016/j.ijfatigue.2020.105659 ↗
42. Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy10.1016/j.ijfatigue.2016.06.003 ↗
43. Modulating the damping capacity of SLMed AlSi10Mg trough stress-relieving thermal treatments10.1016/j.tafmec.2020.102537 ↗
44. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
45. Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: effect of build orientation and mean stress10.1016/j.ijfatigue.2020.105696 ↗
46. Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy10.1016/j.ijfatigue.2019.02.040 ↗
47. Fracture-Mechanical Assessment of the Effect of Defects on the Fatigue Lifetime and Limit in Cast and Additively Manufactured Aluminum-Silicon Alloys from HCF to VHCF Regime10.3390/met10070943 ↗
48. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)10.1016/j.msea.2017.08.027 ↗
49. On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
50. The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion10.1016/j.ijfatigue.2021.106317 ↗
51. F, Maschinenbau, Analytical strength assessment of components : made of steel, cast iron and aluminum materials in mechanical engineering ; FKM Guideline. 2013.
52. Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety10.1016/j.ijfatigue.2006.11.015 ↗
53. Fatigue properties of AlSi10Mg obtained by additive manufacturing: defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
54. Analysis of Fatigue Strength of L-PBF AlSi10Mg with different surface post-processes: effect of residual stresses10.3390/met12060898 ↗