Enhanced extra-long life fatigue resistance of a bimodal titanium alloy by laser shock peening
Source abstract
Abstract
Abstract Ultrasonic fatigue tests were performed on notched specimens to investigate high and very high cycle fatigue behaviors in the laser shock peened region of a compressor blade titanium alloy (Ti–8Al–1Mo–1V). The plastic deformation and compressive residual stress, induced by the laser shock peening (LSP), present gradient distributions along the depth direction. High-angle grain boundaries (HAGB, >15°) are increased by deformation twins, which are introduced into primary α phases during the plastic deformation. The enhancement in fatigue resistance is ascribed to the comprehensive retardation effects of the compressive residual stress, high-density dislocations, and HAGBs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Laser shock peening induced fatigue crack retardation in Ti-17 titanium alloy10.1016/j.msea.2018.09.016 ↗
2. Experiment investigation of laser shock peening on TC6 titanium alloy to improve high cycle fatigue performance10.1016/j.msea.2013.11.073 ↗
3. Very high cycle fatigue behaviors of a turbine engine blade alloy at various stress ratios10.1016/j.ijfatigue.2016.11.032 ↗
4. Surface integrity and fatigue lives of Ti17 compressor blades subjected to laser shock peening with square spots10.1016/j.surfcoat.2018.05.023 ↗
5. Laser shock processing and its effects on microstructure and properties of metal alloys: a review10.1016/S0142-1123(02)00022-1 ↗
6. Effect of laser shock peening on the mechanical properties of a near-alpha titanium alloy10.1016/j.msea.2014.03.108 ↗
7. The compound process of laser shock peening and vibratory finishing and its effect on fatigue strength of Ti-3.5Mo-6.5Al-1.5Zr-0.25Si titanium alloy10.1016/j.jallcom.2018.12.294 ↗
8. Influence of specimen thickness on the fatigue behavior of notched steel plates subjected to laser shock peening10.1016/j.optlastec.2017.12.011 ↗
9. Recovery of fatigue life using laser peening on 2024–T351 aluminium sheet containing scratch damage: The role of residual stress10.1111/ffe.12981 ↗
10. The effects of laser shock peening on the mechanical properties and biomedical behavior of AZ31B magnesium alloy10.1016/j.surfcoat.2018.02.009 ↗
11. Effect of laser shock peening on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy10.1016/j.ijfatigue.2017.04.016 ↗
12. Improvement of high-temperature fatigue performance in the nickel-based alloy by LSP-induced surface nanocrystallization10.1016/j.jallcom.2018.01.070 ↗
13. Microstructural characterisation of metallic shot peened and laser shock peened Ti–6Al–4V10.1016/j.actamat.2016.10.044 ↗
14. Deformation behaviour of commercially pure titanium at extreme strain rates10.1016/j.actamat.2011.02.018 ↗
15. Effect of laser shock peening on combined low- and high-cycle fatigue life of casting and forging turbine blades10.1007/s42243-017-0013-z ↗
16. An assessment of the role of near-threshold crack growth in high-cycle-fatigue life prediction of aerospace titanium alloys under turbine engine spectra10.1007/BF00012671 ↗
17. Stress ratio effect on notched fatigue behavior of a Ti-8Al-1Mo-1V alloy in the very high cycle fatigue regime10.1016/j.ijfatigue.2018.05.032 ↗
18. Stress ratio and notch effects on the very high cycle fatigue properties of a near-alpha titanium alloy10.3390/ma11091778 ↗
19. Evolution of misorientation distribution during warm ‘abc’ forging of commercial-purity titanium10.1016/j.msea.2005.11.026 ↗
20. Grain refinement progress of pure titanium during laser shock forming (LSF) and mechanical property characterizations with nanoindentation10.1016/j.msea.2012.11.087 ↗
21. Laser shock peening of Ti-17 titanium alloy: Influence of process parameters10.1016/j.msea.2011.10.104 ↗
22. Effects of laser peening on residual stresses and fatigue crack growth properties of Ti–6Al–4V titanium alloy10.1016/j.optlaseng.2013.06.011 ↗
23. Deformation heterogeneities and their role in life-limiting fatigue failures in a two-phase titanium alloy10.1016/j.actamat.2014.08.034 ↗
24. Effects of alloying and processing on ultrasonic fatigue behavior in binary Ti-Al alloys10.1016/j.msea.2019.03.079 ↗
25. The role of microtexture on the faceted fracture morphology in Ti–6Al–4V subjected to high-cycle fatigue10.1016/j.actamat.2010.03.036 ↗
26. Microstructural influences on very-high-cycle fatigue-crack initiation in Ti-624610.1007/s11661-008-9633-z ↗
27. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels10.1016/j.ijfatigue.2013.02.023 ↗
28. Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength10.1016/S0142-1123(02)00037-3 ↗
29. Through thickness property variations in friction stir welded AA6061 joint fatigued in very high cycle fatigue regime10.1016/j.ijfatigue.2015.08.013 ↗
30. Small crack initiation and early propagation in an as-extruded Mg-10Gd-3Y-0.5Zr alloy in high cycle fatigue regime10.1016/j.msea.2018.10.015 ↗
31. Planar slip-driven fatigue crack initiation and propagation in an equiatomic CrMnFeCoNi high-entropy alloy10.1016/j.ijfatigue.2019.105418 ↗
32. Effect of crystallographic orientation and geometrical compatibility on fatigue crack initiation and propagation in rolled Ti-6Al-4V alloy10.1016/j.actamat.2019.07.025 ↗
33. Improvement of fatigue life of Ti–6Al–4V alloy by laser shock peening10.1016/j.msea.2010.01.076 ↗
34. Investigation of laser shock peening effects on residual stress state and fatigue performance of titanium alloys10.1016/j.msea.2011.12.072 ↗
35. Improvement of very high cycle fatigue properties in an AA7075 friction stir welded joint by ultrasonic peening treatment10.1111/ffe.12516 ↗
36. Residual stress relaxation and its effects on the fatigue properties of Ti6Al4V alloy strengthened by warm laser peening10.1016/j.msea.2016.10.073 ↗
37. Mean stress sensitivity in fatigue of α, (αβ) and β titanium alloys10.1016/S0921-5093(97)00347-X ↗
38. Residual stress distribution and microstructure of a multiple laser-peened near-alpha titanium alloy10.1007/s11665-018-3336-4 ↗
39. Fatigue crack growth in a laser shock peened residual stress field10.1016/j.ijfatigue.2019.01.020 ↗
40. Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy10.1016/j.msea.2017.08.050 ↗
41. Investigating environmental effects on small fatigue crack growth in Ti-6242S using combined ultrasonic fatigue and scanning electron microscopy10.1016/j.ijfatigue.2014.09.007 ↗