Effects of surface roughness and build thickness on fatigue properties of selective laser melted Inconel 718 at 650 °C
Source abstract
Abstract
Abstract Effects of the surface roughness and the build thickness on fatigue properties of selective laser melted Inconel 718 were investigated at 650 °C. The result indicated that fatigue strength was enhanced by ~50% after surface machining and polishing. The thinner un-machined specimens exhibit a longer fatigue lifetime than the thicker ones, while the opposite trend appears in the machined specimens. Finite element simulations reveal that the defect shape has more evident influence on fatigue properties than the defect depth when it is less than 200 μm. Safety thresholds of the stress concentration factor and the defect depth are 2 and 50 μm, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
2. No more tears for metal 3D printing10.1038/549342a ↗
3. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
4. Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting10.1038/s41427-018-0018-5 ↗
5. Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms10.1016/j.actamat.2019.04.014 ↗
6. Spatially dependent properties in a laser additive manufactured Ti–6Al–4V component10.1016/j.msea.2015.12.021 ↗
7. Qualification and certification of metal additive manufactured hardware for aerospace applications
8. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
9. Data-driven evaluation of fatigue performance of additive manufactured parts using miniature specimens10.1016/j.jmst.2018.12.011 ↗
10. Suresh · 1998
11. Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 71810.1016/j.msea.2018.08.072 ↗
12. Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties10.1016/j.phpro.2014.08.120 ↗
13. Fatigue performance of additive manufactured metallic parts10.1108/13552541311302932 ↗
14. Dental implant surface enhancement and osseointegration
15. Implant surface roughness and bone healing: a systematic review10.1177/154405910608500603 ↗
16. Thickness dependency of mechanical properties for thin-walled titanium parts manufactured by Electron Beam Melting (EBM)®
17. Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V10.1016/j.matchar.2018.04.003 ↗
18. Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V10.1108/13552541211250391 ↗
19. Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting10.1016/j.jmst.2018.02.002 ↗
20. Effect of scanning strategy on mechanical properties of selective laser melted Inconel 71810.1016/j.msea.2019.03.007 ↗
21. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
22. Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior10.1016/j.matdes.2013.08.085 ↗
23. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting10.1016/j.msea.2015.05.035 ↗
24. Effect of heat treatment variations on the mechanical properties of Inconel 718 selective laser melted specimens
25. Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting10.1007/s40964-016-0013-8 ↗
26. Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V10.1108/13552541211250391 ↗
27. High temperature deformation of Inconel 71810.1016/j.jmatprotec.2006.04.072 ↗
28. Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus10.1016/j.scriptamat.2016.12.038 ↗
29. Study of low-modulus biomedical β Ti–Nb–Zr alloys based on single-crystal elastic constants modeling10.1016/j.jmbbm.2016.04.040 ↗
30. Relationship between the texture and young’s modulus over the section of cold-rolled rods of low-modulus biocompatible alloy
31. Biocompatible low Young's modulus achieved by strong crystallographic elastic anisotropy in Ti–15Mo–5Zr–3Al alloy single crystal10.1016/j.jmbbm.2012.05.005 ↗
32. In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders10.1016/j.msec.2016.02.033 ↗
33. Tailoring the texture of IN738LC processed by selective laser melting (SLM) by specific scanning strategies10.1016/j.msea.2016.03.036 ↗
34. Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting10.1016/j.ijfatigue.2017.08.021 ↗
35. Strategy for texture management in metals additive manufacturing10.1007/s11837-017-2264-3 ↗
36. Strain fatigue and tensile behavior of Inconel® 718 from room temperature to 650 C10.1520/JTE10109J ↗
37. Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting10.1016/j.actamat.2016.04.029 ↗
38. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
39. Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel10.1016/j.msea.2015.07.056 ↗
40. Single-crystal laser deposition of superalloys: processing-microstructure maps10.1016/S1359-6454(00)00367-0 ↗
41. Characterization of typical surface effects in additive manufacturing with confocal microscopy10.1088/2051-672X/3/1/014001 ↗
42. Effect of stress triaxiality on plastic damage evolution and failure mode for 316L notched specimen10.3390/met9101067 ↗
43. Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu10.1016/j.scriptamat.2008.05.031 ↗
44. The influence of sample thickness on the tensile properties of pure Cu with different grain sizes10.1016/j.scriptamat.2013.04.009 ↗
45. Cyclic plasticity at pores and inclusions in cast Al-Si alloys10.1016/S0013-7944(02)00097-8 ↗
46. Mechanics of crack tip deformation and extension by fatigue
47. Fatigue crack growth behavior of Inconel 718 produced by selective laser melting
48. Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 71810.1016/j.matchar.2019.01.018 ↗
49. Enhancing fatigue strength of selective laser melting-fabricated Inconel 718 by tailoring heat treatment route10.1002/adem.201800307 ↗
50. Small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH4169 at 650°C in air10.1016/j.engfracmech.2015.12.014 ↗
51. Characterization and analysis of surface notches on Ti-alloy plates fabricated by additive manufacturing techniques
52. A damage tolerance approach to fod based on the ‘worst case notch’concept
53. Applicability of fracture mechanics to very small cracks or the cracks in the early stage
54. Roles of microstructure in fatigue crack initiation10.1016/j.ijfatigue.2009.10.005 ↗
55. Cyclic plasticity at pores and inclusions in cast Al–Si alloys10.1016/S0013-7944(02)00097-8 ↗