Deep rolling effect on fatigue behavior of austenitic stainless steels
Source abstract
Abstract
Abstract In the present study, the effect of deep rolling on the fatigue behavior of two austenitic stainless steels susceptible to strain hardening (AISI 304 and AISI 316) was investigated. The effect of the force and the deformation velocity, on the surface hardening and the final roughness produced by deep rolling treatment, were analyzed using a device built for this purpose. The microstructure of the materials was characterized by optical microscopy, the fracture surfaces were characterized using scanning electron microscopy, the residual stresses and microstructural changes produced by the deep rolling method were characterized by X-ray diffraction. Results show that the deep rolling produces increase in hardness, volume fraction of martensite and compressive residual stresses that increase the fatigue strength of both steels. Also, it was observed that at high cycle fatigue, the AISI 304 stainless steel presents a better fatigue response after deep rolling treatment than the AISI 316. This behavior is associated with a higher resistance to fatigue crack nucleation and growth rate due to metallurgical effects, such as deformation twins and a greater increase in the volume fraction of martensite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Fatigue analysis of welded joints: state of development10.1016/S0951-8339(02)00075-8 ↗
2. A literature review on durability evaluation of crankshafts including comparisons of competing manufacturing processes and cost analysis
3. Hundal · 2001
4. Enhancement of fatigue strength of SAE 1045 steel by tempering treatment and shot peening10.4028/www.scientific.net/MSF.561-565.41 ↗
5. Fatigue performance of a SAE 1045 steel coated with a Colmonoy 88 alloy deposited by HVOF thermal spraying10.1016/j.surfcoat.2006.04.054 ↗
6. Effect of thermomechanical treatment at elevated temperatures on the fatigue strength of steel 45 in various working media10.1007/BF00714981 ↗
7. An investigation into roller burnishing10.1016/S0890-6955(00)00019-5 ↗
8. Deep rolling-the past, the present and the future
9. Surface hardening by strain induced martensitic transformation10.1007/s11740-007-0060-6 ↗
10. Fundamentals of the deep rolling of compressor blades for turbo aircraft enginees
11. Deformation-induced martensitic characteristics in 304 and 316 stainless steels during room-temperature rolling10.1007/BF02663916 ↗
12. Microstructure and mechanical properties of austenitic stainless steels after cold rolling10.1361/105994902770344204 ↗
13. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
14. Formation of martensite in austenitic stainless steels-effects of deformation, temperature, and composition
15. On the pitting corrosion resistance of nitrogen alloyed cold worked austenitic stainless steels10.1016/S0010-938X(02)00035-5 ↗
16. Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 30410.1016/S0921-5093(98)01121-6 ↗
17. ASTM E112 · 2013
18. ASTM Standard E8 · 2011
19. ASTM Standard E606 · 2012
20. ASTM E2860 · 2012
21. Lattice parameters of martensite and austenite in Fe–Ni alloys10.1063/1.1658218 ↗
22. Effect of contact pressure on fretting fatigue of austenitic stainless steel10.1016/S0301-679X(02)00135-4 ↗
23. The synergism between high superficial roughness and corrosive atmosphere in the fatigue behavior of the Sae 1045 steel
24. Relationship between fatigue limit and Vickers hardness in steels10.1016/j.msea.2011.01.040 ↗
25. On the fatigue behaviour of quenched and tempered at 300 and 600°C SAE 1045 steel in an environment of sugar cane juice
26. Mason · 2003
27. Montgomery · 2008
28. Klocke F, Bäcker V, Timmer A, Wegner H. Innovative FE-analysis of the roller burnishing process for different geometries. In: Oñate E (editor). Barcelona: CIMNE; 2009. p. 1–4.
29. Influence of roller burnishing contact width and burnishing orientation on surface quality and tribological behaviour of aluminium 606110.1016/j.jmatprotec.2006.12.044 ↗
30. On the surface and tribological characteristics of burnished cylindrical Al-606110.1016/j.triboint.2008.07.003 ↗
31. Influence of ball burnishing on surface quality and tribological characteristics of polymers under dry sliding conditions10.1016/j.triboint.2010.10.005 ↗
32. A finite element study of elasto-plastic hemispherical contact against a rigid flat10.1115/1.1866166 ↗
33. A finite element study of elasto-plastic hemispherical contact
34. Johnson · 1987
35. Bruñido por rodillo simple en el acero AISI 1045
36. Rodríguez A, de Lacalle LL, Celaya A, Fernández A, Ugalde U. Aplicación del bruñido con bola para el acabado de superficies complejas en máquinas multieje. In: XVIII CONGRESO NACIONAL DE INGENIERÍA MECÁNICA, ed; 2010.
37. A literature survey on the stability and significance of residual stresses during fatigue10.1111/j.1460-2695.2007.01102.x ↗
38. Finite element modeling of hard roller burnishing: an analysis on the effects of process parameters upon surface finish and residual stresses10.1115/1.2738121 ↗
39. Cold surface hardening10.1016/j.cirp.2008.03.100 ↗
40. Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25–600 C10.1016/j.msea.2007.02.004 ↗
41. Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought magnesium alloy AZ8010.1016/j.scriptamat.2005.01.026 ↗
42. Evaluation of an ultrasound-aided deep rolling process for anti-fatigue applications10.1007/s11665-008-9341-2 ↗
43. Residual stress relaxation of deep-rolled austenitic steel10.1016/j.scriptamat.2007.09.045 ↗
44. Simulation and research on deep rolling process parameters
45. Estimation of the yield stress of stainless steel from the Vickers hardness taking account of the residual stress
46. High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 30410.1016/j.scriptamat.2004.02.012 ↗
47. Forrest · 2013
48. High temperature fatigue tests of un-notched and notched specimens made of 40CrMoV13.9 steel10.1016/j.matdes.2014.06.048 ↗
49. High-temperature fatigue strength of a copper–cobalt–beryllium alloy10.1177/0309324713511804 ↗
50. High temperature fatigue tests of a Cu-Be alloy and synthesis in terms of linear elastic strain energy density
51. High temperature fatigue tests of notched specimens made of titanium Grade 210.1016/j.tafmec.2014.12.007 ↗
52. Stacking-fault anomalies and the measurement of stacking-fault free energy in fcc thin films10.1016/0040-6090(69)90089-3 ↗
53. Numerical analysis of different methods to calculate residual stresses in thin films based on instrumented indentation data10.1557/jmr.2012.166 ↗
54. Effect of residual stresses on fatigue strength of severely surface deformed steels by shot peening10.1154/1.3133132 ↗
55. Effect of strain-induced martensitic transformation on fatigue behavior of type 304 stainless steel10.1016/j.proeng.2010.03.036 ↗
56. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment10.1016/j.scriptamat.2006.01.049 ↗
57. The effect of pitting corrosion on the fatigue strength of 304 and 316 stainless steel alloys
58. Fatigue crack growth characteristics of several austenitic stainless steels at high temperature
59. Fatigue crack propagation in stainless steel weldments at high temperature
60. Fatigue-crack initiation and near-threshold crack growth
61. Suresh S. Fatigue of materials, Cambridge solid state science series. Cambridge (UK); 1991. p. 236.