Modeling of residual stress relaxation of fatigue in 2024-T351 aluminium alloy
Source abstract
Abstract
The initial induced compressive residual stresses relax during component operating life and it is important to consider the relaxation phenomenon in the design of the component. In this study, 2024-T 351 aluminium alloy specimens were shot peened under three different shot-peening intensities. Cyclic tests for two load magnitudes were performed for 1, 2, 10, 1000 and 10,000 cycles. The initial and final residual stresses and the cold work after each loading cycle were measured for the three shot-peening intensities and for the two load magnitudes using X-ray diffraction. The initial and final microhardnesses after each loading cycle load were also measured for the three shot-peening intensities. The results showed that the reduction in the residual stress, microhardness and cold work are dependent on the applied load. An empirical model was proposed to estimate the residual stress relaxation. The presented model incorporates parameters including the degree of cold work, initial induced residual stress and the number of applied loading cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. 1987
2. Mechanical surface treatments on titanium, aluminium and magnesium alloys10.1016/S0921-5093(98)01168-X ↗
3. Altenberger I. Deep rolling – the past, the present and the future. In: Proceedings of the 9th international conference on shot peening (ICSP9), Paris, Marne la Vallée, France, September 6–9, 2005. p. 144–55.
4. The effect of controlled shot peening on the fatigue behaviour of 2024-T 3 aluminium friction stir welds10.1016/j.ijfatigue.2006.10.032 ↗
5. Effect of shot peening variables and residual stresses on fatigue life of leaf spring specimens
6. Champoux RL, Underwood JH, Kapp JA. Analytical and experimental methods for residual stress effects in fatigue. American Society for Test and Materials, USA; 1988. p. 134–56, ISBN: 10:0803111959.10.1520/STP1004-EB ↗
7. Investigation of residual stress relaxation under cyclic load10.1016/S0142-1123(01)00132-3 ↗
8. James MR. The relaxation of residual stresses during fatigue, Residual stress and stress relaxation. In: Kula E, Weiss V, editors. Proceedings of the 28th army materials research conference. New York: Plenum Press; 1982. p. 297–314.10.1007/978-1-4899-1884-0_16 ↗
9. Residual stress relaxation in AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures10.1016/S0921-5093(98)00522-X ↗
10. Kodama S. The behavior of residual stress during fatigue stress cycles. In: Proceedings of the international conference on mechanical behavior of metals II. Society of Material Science, Kyoto, Japan; 1972. p. 111–8.
11. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel10.1016/S0142-1123(01)00205-5 ↗
12. Morrow J, Sinclair GM. Cycle-dependent stress relaxation. Symposium on basic mechanisms of fatigue. ASTM STP 237, American Society for Testing and Materials; 1958.10.1520/STP39312S ↗
13. Jhansale HR, Topper TH. Engineering analysis of the inelastic stress response of a structural metal under variable cyclic strains. In: Cyclic stress–strain behavior analysis, experimentation, and failure prediction ASTM STP 519, American Society for Testing and Materials; 1973. p. 246–70.10.1520/STP38034S ↗
14. Residual stress relaxation by reversed loading
15. Taira S, Murakami Y. On the changes in residual stresses due to repeated stressing. In: Proceedings of the 3rd Japan Congress on testing materials. Kyoto, Japan; 1960. p. 52–5.
16. Effects of warm peening on fatigue life and relaxation behaviour of residual stresses in AISI 4140 steel10.1016/S0921-5093(00)01035-2 ↗
17. Qui Q, Wang R. Changes in the state of the material by shot peening. In: Wohlfahrt H, Kopp R, Ohringer OV, editors. Proceedings of the 3rd international conference on shot peening (ICSP3). Garmisch Partenkirchen, Germany, DGM Informationsgesellschaft Verlag, Oberursel; 1987. p. 231–8.
18. Modelling of residual stress relaxation: a review
19. Residual stress relaxation of welded steel components under cyclic load
20. Relaxation of residual stress. Part 1: relaxation of stage 1
21. Relaxation of residual stress. Part 2: relaxation of stage 210.3844/ajeassp.2009.759.763 ↗
22. Airbus Industrie Test Method standards. AITM 1-0011 Constant amplitude fatigue testing of metallic materials. AIRBUS INDUSTRIE, editor. Airbus Industrie, Engineering Directorate, Blagnac cedex, France; 2001. p. 1–24.
23. ASTM E3-2001. Standard method of preparation of metallographic speciments. Annual book of ASTM standards 03.01. American Society for Testing and Materials, Philadelphia; 1983.
24. ASTM E384-99. Standard test method for microhardness of material. Annual book of ASTM standards 03.01. American Society for Testing and Materials; 2003.
25. SAE international. Residual stress measurement by X-ray diffraction. HS-784; 2003. p. 77–84.
26. ASTM E1426-98. 2003 standard test method for determining the effective elastic parameter for X-ray diffraction measurements of residual stress. Annual Book of ASTM Standards 03.01. American Society for Testing and Materials, Philadelphia; 1998.
27. Mechanism of creation of compressive residual stress by shot peening10.1016/S0142-1123(98)00002-4 ↗
28. Effect of small quantities of carbon and nitrogen on the elastic plastic properties of iron10.1016/S0031-8914(41)90517-7 ↗