Laboratory simulation of martensite formation of white etching layer in rail steel
Source abstract
Abstract
White etching layer (WEL) is a frequently observed microstructural phenomenon in rail surface, formed during dynamic wheel/rail contact. It is considered as one of the main initiators for rolling contact fatigue cracks. There are several hypotheses for the formation mechanism of WEL. However, due to the complicated wheel/rail contact conditions, none is directly proven. Currently, the most popular hypotheses refer to either formation of martensitic WEL by phase transformations or formation of nanocrystalline ferritic WEL by severe plastic deformation. In this work, WEL formation by martensitic transformation in R260Mn grade pearlitic rail steel was simulated by fast heating and quenching experiments. Microstructural characteristics of the simulated WEL and WEL observed in a field rail specimen were characterized by microhardness, optical microscopy, scanning electron microscopy and electron backscatter diffraction. Microstructures of the two WELs were compared and similarities in morphology were identified. Numerical simulation shows the possible temperature rise up to austenitizing temperatures. Combining comparisons of experimental simulation with observation of WEL in the rail and the thermodynamic calculations, the hypothesis for WEL formation via martensitic transformation is supported.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Railway Engineering and Dynamics · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Investigation of rolling contact fatigue in a head-hardened rail10.1016/0043-1648(91)90008-I ↗
2. On the mechanism of squat formation on train rails – Part I: origination10.1016/j.ijfatigue.2012.04.023 ↗
3. Metallurgical aspects of surface damage problems in rails10.1179/cmq.1982.21.1.31 ↗
4. Nanostructure formation on the surface of railway tracks10.1016/S0921-5093(00)01947-X ↗
5. Investigation of white etching layers on rails by optical microscopy, electron microscopy, X-ray and synchrotron X-ray diffraction10.1016/S0921-5093(00)01842-6 ↗
6. Microstructural investigation of white etching layer on pearlite steel rail10.1016/j.msea.2006.01.033 ↗
7. Atom probe tomography analysis of the white etching layer in a rail track surface10.1016/j.actamat.2010.02.030 ↗
8. Microstructure features on rolling surfaces of railway rails subjected to heavy loading10.1016/S0921-5093(03)00327-7 ↗
9. A transmission electron microscopy study of the white-etching layer on a rail head10.1016/0025-5416(84)90180-0 ↗
10. Formation of white-etching layers on rail treads10.1016/0043-1648(95)06733-7 ↗
11. A Microstructural Study of Rolling Contact Fatigue in Rails
12. Experimental and numerical modelling of wheel–rail contact and wear10.1016/j.wear.2011.03.024 ↗
13. Porter · 2009
14. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
15. Enhanced structural refinement by combining phase transformation and plastic deformation in steels10.1016/j.scriptamat.2009.02.028 ↗
16. Thermal stresses for frictional contact in wheel–rail systems10.1016/S0043-1648(97)00108-7 ↗
17. Thermal stresses and shakedown in wheel/rail contact10.1007/s00419-002-0255-4 ↗
18. Naeimi M. Computation of the flash-temperature at the wheel–rail contact using a 3D finite element model and its comparison with analytical methods. In: 10th Int Conf Contact Mech. (CM 2015); 2015.
19. 17 – The effect of heating rate on reverse transformations in steels and Fe–Ni-based alloys
20. Savran · 2009
21. Mehrer Wever HH, editor. Landolt-Bornstein. Numerical data and functional relationships in science and technology, new series, group III: crystal and solid state physics: diffusion in metals and alloys, vol. 26. Berlin: Springer-Verlag; 1990. ISBN 3-540-50886-4 [Berichte Der Bunsengesellschaft Für Phys Chemie 1993;97:952. http://dx.doi.org/10.1002/bbpc.19930970725].10.1002/bbpc.19930970725 ↗
22. Α to γ transformation in the nanostructured surface layer of pearlitic steels near room temperature10.1016/j.scriptamat.2008.05.038 ↗