Fatigue life prediction for AlSi10Mg components produced by selective laser melting
Source abstract
Abstract
Abstract Residual defects in additively manufactured metal parts are known to degrade fatigue performance. In this work, pores and oxide particles in AlSi10Mg parts produced by selective laser melting were characterized and quantified by automated scanning electron microscopy (SEM). The fracture surfaces were examined after fatigue tests to identify the critical role of defects in fatigue failure. A correlation between the crack-initiating pore on the fracture surface and fatigue life was established. The pore size distribution measured on a 2D section by scanning electron microscope was used to predict fatigue life using extreme-value theory; good agreement was achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Gibson · 2010
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
4. Mechanical properties of AlSi10Mg produced by selective laser melting10.1016/j.phpro.2012.10.059 ↗
5. Rapid solidification: selective laser melting of AlSi10Mg10.1007/s11837-015-1763-3 ↗
6. Anisotropic mechanical behavior of AlSi10Mg parts produced by selective laser melting10.1007/s11837-016-2230-5 ↗
7. Oxide, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting10.1016/j.ijfatigue.2016.06.002 ↗
8. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
9. Buchbinder · 2010 · 1
10. Fatigue properties of AlSi10Mg obtained by additive manufacturing: defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
11. Qualification of AM parts: extreme value statistics applied to tomographic measurements10.1016/j.matdes.2017.05.091 ↗
12. Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality10.1016/j.matdes.2016.05.041 ↗
13. Fatigue performance enhancement of selectively laser melted aluminium alloy by heat treatment
14. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
15. Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy10.1016/j.ijfatigue.2016.06.003 ↗
16. Computed tomography for characterization of fatigue performance of selective laser melted parts10.1016/j.matdes.2015.06.063 ↗
17. Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting10.1016/j.jmatprotec.2015.02.023 ↗
18. LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM10.1016/j.ijfatigue.2018.07.030 ↗
19. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
20. Fatigue properties of additively manufactured AlSi10Mg – surface treatment effect
21. Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg10.1016/j.ijfatigue.2018.07.016 ↗
22. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)10.1016/j.msea.2017.08.027 ↗
23. On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
24. Influence of as-built surface and heat treatment on the fatigue resistance of Additively Layer Manufacturing (ALM) AlSi10Mg alloy10.1051/matecconf/201816502004 ↗
25. Influence of defect size on the fatigue resistance of AlSi10Mg alloy elaborated by selective laser melting (SLM)
26. Quantitative evaluation of effects of non-metallic inclusions on fatigue-strength of high strength steels. 2. Fatigue limit evaluation based on statistics for extreme values of inclusion size10.1016/0142-1123(89)90055-8 ↗
27. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
28. Fatigue strength prediction for titanium alloy TiAl6V4 manufactured by selective laser melting10.1007/s11661-015-2864-x ↗
29. Interrelationship between statistical methods for estimating the size of the maximum inclusion in clean steels10.1016/S1359-6454(03)00041-7 ↗
30. Extreme value theory and statistics of univariate extremes: a review10.1111/insr.12058 ↗
31. extRemes 2.0: an extreme value analysis package in R10.18637/jss.v072.i08 ↗
32. Extreme value analysis of tail departure from log-normality in experimental and simulated grain size distributions10.1016/j.actamat.2013.06.001 ↗
33. Sur La Distribution Limite Du Terme Maximum D’Une Serie Aleatoire10.2307/1968974 ↗
34. Statistical inference using extreme order statistics
35. Prediction of lack-of-fusion porosity for powder bed fusion
36. ASTM Committee F42 · 2013
37. ASTM Committee E08 · 2007
38. EOS GmbH – Electro Optical Systems. Material data sheet: EOS Aluminium AlSi10Mg (for EOS M280) 2016. [accessed October 11, 2016].
39. Transient inclusion evolution during modification of alumina inclusions by calcium in liquid steel Part I. Background, experimental techniques and analysis methods10.1007/s11663-011-9516-3 ↗
40. Tang · 2017
41. Relationship between defect size and fatigue life distributions in Al-7 Pct Si-Mg alloy castings10.1007/s11661-009-9847-8 ↗
42. Non-local stress approach for fatigue assessment based on weakest-link theory and statistics of extremes10.1111/j.1460-2695.2007.01190.x ↗
43. evd: extreme value distributions
44. Application of the Generalized Pareto Distribution to the estimation of the size of the maximum inclusion in clean steels10.1016/S1359-6454(99)00034-8 ↗
45. Crystallography of interfaces and grain size distributions in Sr -doped LaMnO310.1111/jace.12984 ↗
46. Scatter in fatigue life due to effects of porosity in cast A356–T6 aluminum-silicon alloys10.1007/s11661-003-0153-6 ↗
47. Statistical modeling of microstructure and defect population effects on the fatigue performance of cast A356–T6 automotive components10.1016/j.msea.2006.07.003 ↗
48. The effect of porosity on the fatigue life of cast aluminium-silicon alloys10.1111/j.1460-2695.2004.00780.x ↗
49. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
50. Fatigue life assessment of aluminum alloys with casting defects10.1016/0013-7944(93)90108-5 ↗
51. An experimental evaluation of fatigue crack growth10.1016/j.engfailanal.2004.04.002 ↗
52. Dieter · 1988
53. Environmental fatigue of an Al-Li-Cu alloy: Part I. Intrinsic crack propagation kinetics in hydrogenous environments10.1007/BF02665008 ↗
54. Environmental fatigue of an Al-Li-Cu alloy: Part II. Microscopic hydrogen cracking processes10.1007/BF02659499 ↗
55. The effect of solution heat-treatment time on the fatigue properties of an Al-Si-Mg casting alloy10.1046/j.8756-758x.2001.00490.x ↗
56. The influence of environment and stress ratio on fatigue crack growth at near threshold stress intensities in low-alloy steels10.1016/0013-7944(80)90078-8 ↗
57. Oxide films, pores and the fatigue lives of cast aluminum alloys10.1007/BF02735010 ↗
58. Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/35710.1007/s11661-003-0189-7 ↗
59. Standard practice for extreme value analysis of nonmetallic inclusions in steel and other microstructural features
60. Largest-extreme-value distribution analysis of multiple inclusion types in determining steel cleanliness10.1007/s11663-001-0036-4 ↗
61. Extreme value models for the assessment of steels containing multiple types of inclusion10.1016/j.actamat.2006.01.016 ↗
62. A tentative explanation for two parameters, C and m, in Paris equation of fatigue crack growth10.1007/BF00017293 ↗
63. Microstructural effects on fatigue at intermediate and high crack growth rates in a low alloy steel10.1016/0025-5416(79)90095-8 ↗
64. Microstructure-based fatigue life prediction for cast A356–T6 aluminum-silicon alloys10.1007/BF02693159 ↗