Surface roughness effects on the fatigue behaviour of gyroid cellular structures obtained by additive manufacturing
Source abstract
Abstract
Surface roughness effects on the fatigue behaviour of gyroid cellular Ti-6Al-4 V structures obtained by additive manufacturing were investigated. The normalized fatigue strength values for 10^6 cycles, obtained from the S-N curves, were in the range of 0.21–0.23. Finite element analyses showed that stress peak points were located on the stress concentrators due to surface defects, and scanning electron microscopy images showed that crack initiation was located at the surface. It is concluded that the expected good fatigue behaviour due to the curvature in the junctions of the struts, is diminished because of the superficial roughness contributing to the notch effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting10.1016/j.actbio.2008.03.013 ↗
2. Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants10.1016/j.msec.2013.05.050 ↗
3. Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam
4. Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition10.1016/j.actamat.2014.11.028 ↗
5. Recent research and development in titanium alloys for biomedical applications and healthcare goods10.1016/j.stam.2003.09.002 ↗
6. Fatigue characteristics of metallic biomaterials10.1016/j.ijfatigue.2006.09.021 ↗
7. A review on the fatigue behavior of Ti-6Al-4V fabricated by electron beam melting additive manufacturing10.1016/j.ijfatigue.2018.09.022 ↗
8. Fatigue behavior of Ti-6Al-4V cellular structures fabricated by additive manufacturing technique10.1016/j.jmst.2018.09.066 ↗
9. Fatigue properties of a dental implant produced by electron beam melting®(EBM)10.1016/j.jmatprotec.2015.07.013 ↗
10. Fatigue behaviour and equivalent diameter of single Ti-6Al-4V struts fabricated by Electron Bean Melting orientated to porous lattice structures10.1016/j.matdes.2018.05.066 ↗
11. Bordia RK. Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
12. The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting10.1016/j.jmbbm.2016.01.034 ↗
13. Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance10.1115/1.4025773 ↗
14. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials10.1016/j.jmbbm.2014.12.015 ↗
15. Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type10.1016/j.actbio.2017.11.014 ↗
16. Gyroid porous titanium structures: A versatile solution to be used as scaffolds in bone defect reconstruction10.1016/j.matdes.2017.11.050 ↗
17. Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures10.1016/j.jmbbm.2016.05.027 ↗
18. Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison10.1016/j.jmbbm.2017.01.016 ↗
19. Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties10.1016/j.actbio.2017.02.024 ↗
20. Compression-compression fatigue behaviour of Gyroid-type Triply Periodic Minimal Surface porous structures fabricated by Selective Laser Melting10.1016/j.actamat.2019.09.042 ↗
21. Computational modelling of strut defects in SLM manufactured lattice structures10.1016/j.matdes.2019.107671 ↗
22. Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications10.1016/j.msec.2016.06.016 ↗
23. Fatigue behavior of porous biomaterials manufactured using selective laser melting10.1016/j.msec.2013.08.006 ↗
24. Influence of load orientation and of types of loads on the mechanical properties of porous Ti6Al4V biomaterials10.1016/j.matdes.2017.09.045 ↗
25. Mechanical performance of additively manufactured meta-biomaterials10.1016/j.actbio.2018.12.038 ↗
26. Ductility and the Workability of Metals
27. Heat treatment enhancing the compressive fatigue properties of open-cellular Ti-6Al-4V alloy prototypes fabricated by electron beam melting10.1016/j.jmst.2017.12.003 ↗
28. Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting10.1016/j.actamat.2011.10.051 ↗
29. Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering10.1016/j.actbio.2019.05.046 ↗
30. From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials10.1016/j.actbio.2018.10.043 ↗
31. Improved fatigue endurance ratio of additive manufactured Ti-6Al-4V lattice by hot isostatic pressing10.1016/j.matdes.2017.08.048 ↗
32. Effect of process parameters settings and thickness on surface roughness of EBM produced Ti-6Al-4V10.1108/13552541211250391 ↗
33. Additive manufacturing of Ti6Al4V alloy: A review10.1016/j.matdes.2018.107552 ↗
34. Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting10.1016/j.actamat.2018.02.060 ↗
35. Compression deformation behavior of Ti – 6Al – 4V alloy with cellular structures fabricated by electron beam melting10.1016/j.jmbbm.2012.10.005 ↗
36. Influence of inherent surface and internal defects on mechanical properties of additively manufactured Ti6Al4V alloy: Comparison between selective laser melting and electron beam melting10.3390/ma11040537 ↗
37. Effect of build orientation on the fatigue properties of as-built Electron Beam Melted Ti-6Al-4V alloy10.1016/j.ijfatigue.2018.08.006 ↗
38. Toward Manufacturing Quality Ti-6Al-4V Lattice Struts by Selective Electron Beam Melting (SEBM) for Lattice Design10.1007/s11837-018-3030-x ↗
39. Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting10.1007/s11837-015-1300-4 ↗
40. Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces10.1016/j.ijfatigue.2017.04.009 ↗
41. Kruth J-PP. Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting10.1016/j.actbio.2016.10.005 ↗