Predicting the effects of material properties gradient and residual stresses on the bending fatigue strength of induction hardened aeronautical gears

Abstract This paper proposes an experimental methodology to characterize complex parts presenting various gradients using aeronautical induction surface hardened spur gears. A 3D fatigue model taking into account residual stresses, microstructure variations, and surface roughness is then proposed for the prediction of the bending endurance limit. The model is based on the well-known Crossland criterion; calibrated with representative axial and torsion laboratory specimens. The results are compared with testing performed on a custom-made single tooth bending fatigue (STBF) rig. Fracture surface analysis using electronic microscopy is used to investigate the crack initiation sites. It is shown that residual stresses can have a significant impact on bending fatigue and that two induction treatments can present very different fatigue resistance even if the shape and depth of the hardened layer is identical in the root. The proposed methodology could be adapted to other geometries and surface treatments.