Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions
Source abstract
Abstract
Abstract In this paper, the room temperature fatigue crack propagation behavior of Inconel 625 alloy processed by laser powder bed fusion was studied and compared to that of a wrought alloy of the same composition. First, the processing-induced defects distribution and the build orientation-dependent tensile properties of the laser powder bed-processed specimens were analysed. Next, crack propagation testing specimens were manufactured with four build orientations, half were subjected to stress relief annealing, while the other half were subjected to stress relief annealing followed by hot isostatic pressing. The impact of the build orientation and the post-processing conditions on the long fatigue crack propagation behavior at low R ratio (R = 0.1) was evaluated. The resistance to crack propagation of the laser powder bed-processed IN625 specimens was found to be similar to that of a wrought alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. The status, challenges, and future of additive manufacturing in engineering10.1016/j.cad.2015.04.001 ↗
2. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
3. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
4. Metal fabrication by additive manufacturing using laser and electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
5. A review of additive manufacturing10.5402/2012/208760 ↗
6. Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components10.1016/j.scriptamat.2016.05.002 ↗
7. Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting10.1016/j.ijfatigue.2016.06.002 ↗
8. Multi-scale damage mechanics method for fatigue life prediction of additive manufacture structures of Ti-6Al-4V10.1016/j.msea.2016.05.073 ↗
9. Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM10.1016/j.engfailanal.2016.05.036 ↗
10. Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology10.1016/j.acme.2014.02.003 ↗
11. Microstructure and mechanical behavior of porous Ti-6Al-4V parts obtained by selective laser melting10.1016/j.jmbbm.2013.05.011 ↗
12. Deformation and failure behaviour of Ti-6Al-4V lattice structures manufactured by selective laser melting (SLM)10.1007/s00170-015-7655-4 ↗
13. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting10.1016/j.matdes.2016.05.070 ↗
14. Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment10.1016/j.msea.2017.08.058 ↗
15. Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes
16. Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder10.1016/j.matdes.2014.07.006 ↗
17. Model of radiation and heat transfer in laser-powder interaction zone at selective laser melting10.1115/1.3109245 ↗
18. Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting10.1007/s11665-013-0658-0 ↗
19. Microstructure characteristics of Inconel 625 superalloy manufactured by selective laser melting10.1016/j.jmst.2014.09.020 ↗
20. Laser powder bed fusion of nickel alloy 625: experimental investigations of effects of process parameters on melt pool size and shape with spatter analysis10.1016/j.ijmachtools.2017.03.004 ↗
21. Surface roughness analysis, modelling and prediction in selective laser melting10.1016/j.jmatprotec.2012.11.011 ↗
22. Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion10.1016/j.msea.2017.02.038 ↗
23. Residual stress within metallic model made by selective laser melting process10.1016/S0007-8506(07)60677-5 ↗
24. Additive manufacturing of fatigue resistant materials: challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
25. Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
26. Effects of defects in laser additive manufactured Ti-6Al-4V on fatigue properties10.1016/j.phpro.2014.08.120 ↗
27. Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy10.1016/j.ijfatigue.2016.06.003 ↗
28. The Effect of manufacturing defects on the fatigue behaviour of Ti-6Al-4V specimens fabricated using selective laser melting10.4028/www.scientific.net/AMR.891-892.1519 ↗
29. Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting10.1016/j.jmatprotec.2015.01.025 ↗
30. High cycle fatigue (HCF) performance of Ti-6Al-4V alloy processed by selective laser melting10.4028/www.scientific.net/AMR.816-817.134 ↗
31. Fatigue performance evaluation of selective laser melted Ti–6Al–4V10.1016/j.msea.2014.01.041 ↗
32. Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.05.018 ↗
33. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17–4 PH stainless steel10.1016/j.ijfatigue.2016.03.014 ↗
34. Defect-dominated fatigue behavior in type 630 stainless steel fabricated by selective laser melting10.1016/j.msea.2016.04.042 ↗
35. Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy10.1016/j.prostr.2016.06.380 ↗
36. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance10.1016/j.ijfatigue.2012.11.011 ↗
37. Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties10.1016/j.jallcom.2012.07.022 ↗
38. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting10.1016/j.engfracmech.2014.03.008 ↗
39. Long fatigue crack growth in Inconel 718 produced by selective laser melting10.1016/j.ijfatigue.2016.03.012 ↗
40. Laser powder-bed fusion of Inconel 718 to manufacture turbine blades10.1007/s00170-017-0839-3 ↗
41. Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion10.1016/j.msea.2017.06.045 ↗
42. Standard Test Method for Measurement of Fatigue Crack Growth Rates. ASTM International; 2015.
43. ISO 12108 B. Metallic material—fatigue testing—fatigue crack growth method; 2002.
44. About the fatigue crack propagation threshold of metals as a design criterion – a review10.1016/j.engfracmech.2015.12.002 ↗
45. Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts10.1016/j.jmatprotec.2017.12.043 ↗
46. Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted Inconel 718: structure, texture, and phases
47. Standard Test Methods for Tension Testing of Metallic Materials. ASTM International; 2016.
48. Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures10.1016/j.msea.2010.08.034 ↗
49. Lampman · 1996
50. Hot isostatic pressing of IN718 components manufactured by selective laser melting
51. Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion10.1016/j.msea.2017.03.100 ↗
52. Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion10.1007/s00170-017-0546-0 ↗
53. Liaw P. Overview of crack closure at near-threshold fatigue crack growth levels; 1988.10.1520/STP27201S ↗
54. Threshold and effective threshold of fatigue crack propagation in ARMCO iron I: the influence of grain size and cold working10.1016/0921-5093(91)90671-9 ↗
55. High-cycle fatigue of nickel-based superalloy ME3 at ambient and elevated temperatures: Role of grain-boundary engineering10.1007/s11661-005-0007-5 ↗
56. Krupp · 2007
57. Hertzberg · 2012
58. Mechanical properties of additive manufactured nickel alloy 625
59. An investigation of the effects of stress ratio and crack closure on the micromechanisms of fatigue crack growth in Ti-6Al-4V10.1016/S1359-6454(96)00380-1 ↗