Cumulative damage evaluation in multiple cycle fatigue tests taking into account energy parameters
Source abstract
Abstract
Abstract This work reports fatigue stress test results for AISI 304 steel ( R = −1) that has been subjected to a high cycle number. It shows that the energetic effect (employing different temperature increments for equal loading of uniaxial stress) can be used to evaluate the cumulative damage caused by any prior loading. Various load histories were applied to AISI 304 specimens, and the resulting damage was evaluated in reference to the energy factor, Φ , which is dependent on the maximum temperature at the sample surface when irreversible plastic deformation begins. The time curves (Wohler curves) and the damage ratio based on the consumed energy were compared to those obtained according to Palmgren–Miner rules; this comparison served to show how under-evaluations can occur with high damage ratios.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Die lebensdauer von kugellargen
2. Cumulative damage in fatigue10.1115/1.4009458 ↗
3. Fatigue life prediction of 3-D problems by damage mechanics with two-block loading10.1016/S0142-1123(01)00057-3 ↗
4. Corten HT, Dolan TJ. Cumulative fatigue damage. In: Proceedings of the international conference on fatigue of metals. Institute of Mechanical Engineers, London; 1956. p. 235–45.
5. Haibach E. Modifizierte lineare Schadensakkumulationshypothese zur Berücksichtigung des Dauerfestigkeitsabfalls mit fortschreitender Schädigung. Technische Mitteilung des LBF, nr. TM 50/70; 1970.
6. Manson · 1967
7. The nature of initiation and propagation s–n curves at and below the fatigue limit10.1046/j.1460-2695.2002.00463.x ↗
8. Sih GC. Multiscale fatigue crack initiation and propagation of engineering materials, structural integrity and microstructural worthiness: solid mathematics and its applications, vol. 152, Springer; 2008.10.1007/978-1-4020-8520-8 ↗
9. A cumulative damage theory for fatigue crack initiation and propagation10.1016/0142-1123(84)90017-3 ↗
10. Cumulative fatigue damage and life prediction theories: a survey of the state of the for homogeneous materials10.1016/S0142-1123(97)00081-9 ↗
11. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components10.1016/S0142-1123(99)00088-2 ↗
12. Rapid determination of the fatigue curve by the thermographic method10.1016/S0142-1123(01)00107-4 ↗
13. An infrared image processing to analyse the calorific effects accompanying strain localization10.1016/S0020-7225(00)00002-1 ↗
14. The latent energy remaining in a metal after cold working10.1098/rspa.1934.0004 ↗
15. Microplastic strain hysteresis energy as a criterion for fatigue fracture10.1115/1.3658884 ↗
16. Grover HJ. An observation concerning the cycle ratio in cumulative damage. In: Proceedings of fatigue in aircraft structures ASTM STP 274. Philadelphia; 1960. p. 120–4.10.1520/STP45928S ↗
17. Analisi termica per la valutazione del comportamento a fatica di provini soggetti a successive serie di carichi10.3221/IGF-ESIS.12.09 ↗
18. Cumulate damage evaluation of steel using infrared thermography10.1016/j.tafmec.2010.10.002 ↗
19. Cumulative damage by miner’s rule and by energetic analysis
20. Atzori B, Meneghetti G, Ricotta M. Analisi del comportamento a fatica a due livelli di carico di un acciaio inossidabile basata sulla dissipazione di energia. In: Proceeding of AIAS XXXVIII. Torino; 2009.
21. On the thermodynamic entropy of fatigue fracture10.1098/rspa.2009.0348 ↗
22. Theoretical analysis, infrared and structural investigations of energy dissipation in metals under cyclic loading10.1016/j.msea.2006.02.462 ↗
23. Theoretical and experimental study of energy dissipation in the course of strain localization in iron10.1007/s10808-009-0018-x ↗
24. A new application of the infrared thermography for fatigue evaluation and damage assessment10.1016/j.ijfatigue.2012.06.003 ↗
25. A new iteration method for the thermographic determination of fatigue limit in steels10.1016/j.ijfatigue.2003.12.009 ↗
26. Fatigue damage identification by means of modal parameters10.1016/j.proeng.2011.04.283 ↗
27. Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography10.1111/j.1460-2695.2005.00856.x ↗
28. Fatigue limit evaluation of metals using an infrared thermographic technique10.1016/S0167-6636(97)00047-1 ↗
29. Rapid determination of the fatigue limit of materials and components by means of the infrared technique
30. Fatigue damage identification by means of modal parameters10.1016/j.proeng.2011.04.283 ↗
31. Rapid determination of fatigue failure based on temperature evolution: fully reversed bending load10.1016/j.ijfatigue.2009.07.015 ↗
32. Calorimetric study of the energy dissipated from a solid subjected to fatigue cycles10.1088/0022-3727/1/12/320 ↗
33. Energy stored in a specimen under fatigue limit loading conditions10.1520/JTE12577J ↗
34. Short-time procedure for the determination of Wöhler and fatigue life curves using mechanical, thermal and electrical data10.1299/jmmp.2.507 ↗
35. Curà F, Curti G, Sesana R. Thermographic investigation of progressive fatigue damage in steel specimens. In: Proceedings of ICEM 12. Bari; 2004.
36. Proposta di utilizzo di metodologie termografiche per il controllo di qualità di componenti meccanici10.3221/IGF-ESIS.12.04 ↗
37. Determination of fatigue limit by mono-axial tensile specimens using thermal analysis
38. Risitano A, Risitano G, Clienti C. Fatigue limit by thermal analysis of specimen surface in mono axial traction test. In: Proceedings of ICEM14. Poitiers; 2010.10.1051/epjconf/20100638010 ↗
39. A first approach to the analysis of fatigue parameters by thermal variations in static tests on plastics10.1016/j.engfracmech.2010.04.028 ↗
40. Risitano · 2011