In-situ investigation on fatigue behaviors of Ti-6Al-4V manufactured by selective laser melting
Source abstract
Abstract
Abstract In-situ fatigue tests were conducted for exploring the fatigue crack propagation process for Ti-6Al-4V manufactured by selective laser melting (SLM). Fatigue specimens were prepared with two printing orientations by SLM and characterized by scanning electron microscopy (SEM). In-situ fatigue experiments were carried out at 25 °C, 200 °C, 400 °C and 600 °C, respectively. Results show that vertically printed specimens have more and larger defects than horizontally printed ones. The fatigue property of horizontally printed specimens is better than that of vertically printed specimens. The anisotropy caused by printing orientation is the reason for the difference in fatigue property. Crack propagation rate increases with temperature. A large number of secondary cracks occurred during the crack propagation at elevated temperature. The branching of secondary cracks releases the energy at the crack tip, and thus slows down the crack growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A review of additive manufacturing. ISRN
2. Additive manufacturing of Ti6Al4V alloy: A review10.1016/j.matdes.2018.107552 ↗
3. Additive manufacturing of fatigue resistant materials: challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
4. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
5. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
6. Additive manufacturing of metallic materials: a review10.1007/s11665-017-2747-y ↗
7. Additive manufactured AlSi10Mg samples using selective laser melting (SLM): microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
8. Additive manufacturing of metallic components-process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
9. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys10.1080/14686996.2017.1361305 ↗
10. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
11. A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.018 ↗
12. VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume10.1111/ffe.12830 ↗
13. The behavior of crack initiation and early growth in high-cycle and very-high-cycle fatigue regimes for a titanium alloy10.1016/j.ijfatigue.2018.03.021 ↗
14. Experimental and theoretical investigation of environmental media on very-high-cycle fatigue behavior for a structural steel10.1016/j.actamat.2010.10.064 ↗
15. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗
16. High power selective laser melting (HP SLM) of aluminum parts10.1016/j.phpro.2011.03.035 ↗
17. In situ Xray imaging of defect and molten pool dynamics in laser additive manufacturing10.1038/s41467-018-03734-7 ↗
18. Influence of defects, surface roughness and HIP on the fatigue strength of Ti6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
19. Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy. 740–741 Mater10.1016/j.msea.2018.10.083 ↗
20. In situ defect detection in selective laser melting via full-field infrared thermography
21. Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing10.1016/j.ijfatigue.2019.02.014 ↗
22. Estimates of the mechanical properties of laser powder bed fusion Ti-6Al-4V parts using finite element models10.1016/j.matdes.2019.107678 ↗
23. Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM)10.1016/j.matchar.2018.03.028 ↗
24. Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V10.1016/j.matchar.2018.04.003 ↗
25. Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: mean stress and defect sensitivity10.1016/j.ijfatigue.2017.10.021 ↗
26. LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM10.1016/j.ijfatigue.2018.07.030 ↗
27. A novel hybrid selective laser melting/hot isostatic pressing of near-net shaped Ti-6Al-4V alloy using an in-situ tooling: Interfacial microstructure evolution and enhanced mechanical properties10.1016/j.msea.2018.01.079 ↗
28. Investigation of incremental fatigue crack growth mechanisms using in situ SEM testing10.1016/j.ijfatigue.2011.03.004 ↗
29. In-situ investigation of the anisotropic mechanical properties of laser direct metal deposition Ti6Al4V alloy10.1016/j.msea.2017.11.106 ↗
30. Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting10.1016/j.ijfatigue.2017.07.014 ↗
31. Influence of defects on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1051/matecconf/201816502005 ↗
32. Analysis of the energy dissipation in multiaxial fatigue tests of AISI 304L stainless steel bars
33. Evaluating the specific heat loss in severely notched stainless steel specimens for fatigue strength analyses
34. In-situ SEM investigation on fatigue behaviors of additive manufactured Al-Si10-Mg alloy at elevated temperature10.1016/j.engfracmech.2019.03.040 ↗
35. In-situ SEM observation and crystal plasticity finite element simulation of fretting fatigue crack formation in Ni-base single crystal super alloys10.1016/j.triboint.2016.03.025 ↗
36. In situ observation of fatigue crack initiation and propagation behavior of a high-Nb TiAl alloy at 750°C10.1016/j.msea.2015.04.062 ↗
37. In situ study of martensitic transformation and nucleation and propagation of cracks in Cu-Ni-Al shape memory alloy10.1179/026708301225000716 ↗
38. In-situ investigation of tensile deformation and fracture mechanism of 12Cr1MoV steel after long-term service10.1016/j.msea.2017.05.096 ↗
39. Static assessment of nanoscale notched silicon beams using the averaged strain energy density method10.1016/j.tafmec.2018.03.007 ↗
40. Experimental characterization at nanoscale of single crystal silicon fracture toughness
41. Fracture behavior of nanoscale notched silicon beams investigated by the theory of critical distances
42. Fatigue behaviors in duplex stainless steel studied using in-situ SEM/EBSD method10.1016/j.mspro.2014.06.282 ↗
43. GB/T 228-2002. Metallic materials-Tensile testing at ambient temperature, 2002.
44. In situ scanning electron microscopy-based high-temperature deformation measurement of nickel-based single crystal superalloy up to 800 °C10.1016/j.optlaseng.2018.04.016 ↗
45. Fatigue cracks at notches10.1016/0020-7403(77)90011-X ↗
46. Newman · 1971
47. Analysis of the effect of out-of-phase biaxial fatigue loads on crack paths in cruciform specimens using XFEM10.1016/j.ijfatigue.2019.01.019 ↗
48. Multiaxial fatigue analysis of notched components using combined critical plane and critical distance approach10.1016/j.ijmecsci.2019.06.027 ↗
49. A new critical plane-energy model for multiaxial fatigue life prediction of turbine disc alloys10.1016/j.engfailanal.2018.07.001 ↗
50. A statistical model of fatigue failure incorporating effects of specimen size and load amplitude on fatigue life10.1080/14786435.2019.1609707 ↗
51. Statistical assessment of notch toughness against cleavage fracture of ferritic steels10.1111/ffe.12756 ↗