Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion
Source abstract
Abstract
Abstract High-cycle fatigue testing of nickel-based superalloy Inconel 718 made by laser powder-bed fusion was performed on round uniform-gauge or hourglass specimens for various specimen orientations, stress ratios and surface conditions (as-built and machined). Only surface conditions, specifically near-surface process defects, influenced fatigue properties. There was a systematic bias of the azimuthal position of crack initiation sites. Crack initiation in specimens with as-built surfaces occurred at 50 µm diameter near-surface features. These dimensions were used in conjunction with fatigue limits derived from tests suspended at 107 cycles to calculate threshold ΔK values of 2–6 MPa √m due to as-built surface conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Additive manufacturing in the context of structural integrity10.1016/j.ijfatigue.2016.07.005 ↗
2. An introduction to the fatigue and fracture behavior of additive manufactured parts10.1016/j.ijfatigue.2016.07.007 ↗
3. Critical assessment of fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research10.1016/j.ijfatigue.2015.12.003 ↗
4. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
5. A review of the fatigue properties of additively manufactured Ti-6Al-4V10.1007/s11837-017-2728-5 ↗
6. Additive manufacturing of fatigue resistant materials: challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
7. Fatigue characteristics of steels manufactured by selective laser melting10.1016/j.ijfatigue.2018.12.029 ↗
8. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
9. Additive manufacturing of metallic components- Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
10. MSFC-STD-3716 · 2017 · 58
11. Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting10.1016/j.msea.2015.05.035 ↗
12. Hot Isostatic pressing of IN718 components manufactured by selective laser melting
13. Long fatigue crack growth in Inconel 718 produced by selective laser melting10.1016/j.ijfatigue.2016.03.012 ↗
14. Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 71810.1016/j.msea.2019.05.007 ↗
15. A damage evolution model based on micro-structural characteristics for an additive manufactured superalloy under monotonic and cyclic loading conditions
16. Relating porosity to fatigue failure in additively manufactured alloy 71810.1016/j.msea.2018.04.075 ↗
17. The influence of additive manufacturing processing parameters on surface roughness and fatigue life10.1016/j.ijfatigue.2019.03.025 ↗
18. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
19. Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion10.1016/j.msea.2019.06.003 ↗
20. Notch-Defect Interaction in Additively Manufactured Inconel 71910.1016/j.ijfatigue.2018.12.021 ↗
21. MMPDS-12 · 2015
22. Bending fatigue life characaterisation of direct metal laser sintering nickel alloy 71810.1111/ffe.12286 ↗
23. Microstructure and directional fatigue behavior of Inconel 718 produced by selective laser melting
24. Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 71810.1016/j.msea.2018.08.072 ↗
25. Fatigue life prediction of additively manufactured material: Effects of surface roughness, defect size, and shape10.1111/ffe.12799 ↗
26. Wells · 2016 · 49
27. Notched fatigue testing of Inconel 718 prepared by selective laser melting10.1111/ffe.12880 ↗
28. ASTM E466 · 2007 · 5
29. Effect of laser focus shift on surface quality and density of Inconel 718 parts produced via selective laser melting
30. The effect of laser focus shift on microstructural variation of Inconel 718 produced by selective laser melting
31. ISO/ASTM 52921 · 2013 · 13
32. Build orientation effects on texture and mechanical properties of selective laser melting Inconel 71810.1007/s11665-019-03980-w ↗
33. On the use of the Goodman diagram for high cycle fatigue design10.1007/BF00012670 ↗
34. Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety10.1016/j.ijfatigue.2006.11.015 ↗
35. Fatigue crack growth behavior of additively manufactured 17–4 PH stainless steel: effects of build orientation and microstructure10.1016/j.ijfatigue.2019.02.015 ↗
36. Fatigue behavior of additively manufactured 17–4 PH stainless steel: Synergistic effects of surface roughness and heat treatment10.1016/j.ijfatigue.2019.02.039 ↗
37. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
38. Effect of build orientation on mechanical properties and microstructure of Ti-6Al-4V manufactured by selective laser melting10.1007/s11661-019-05322-w ↗
39. Characterization of metal additive manufacturing surfaces using synchrotron X-ray CT and micromechanical modeling10.1007/s00466-017-1531-z ↗
40. Surface treatment of powder-bed fusion additive manufactured metals for improved fatigue life10.1007/s11665-018-3732-9 ↗
41. Empirical approach to understanding the fatigue behavior of metals made using additive manufacturing10.1007/s11661-016-3501-z ↗
42. Effect of build angle on surface properties of nickel superalloys processed by selective laser melting10.1007/s11837-017-2706-y ↗
43. Fatigue-life prediction methodology using small-crack theory10.1016/S0142-1123(98)00058-9 ↗
44. Fatigue properties of Al10SiMg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
45. Effect of surface roughness on fatigue performance of additive manufactured Ti-6Al-4V10.1179/1743284715Y.0000000053 ↗
46. Overview of fatigue and damage tolerance performance of SLM Alloy 718
47. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17–4 PH stainless steel10.1016/j.ijfatigue.2016.03.014 ↗
48. A critical assessment of faitgue crack nucleation and growth models for Ni- and Ni, Fe-based superalloys10.1179/095066010X12777205875796 ↗
49. Raju IS, Newman JC. Stress-intensity factors for circumferential surface cracks in pipes and rods under tension and bending loads, ASTM STP 905: fracture mechanics: seventeenth volume. In: Underwood JH, Chait R, Smith CW, Wilhelm DP, Andrews JC, Newman JC, editors. American Society for Testing and Materials, Philadelphia, Pennsylvania; 1986. p. 789–805.10.1520/STP17428S ↗
50. Forman RG, Shivakumar V. Growth behavior of surface cracks in the circumferential plane of solid and hollow cylinders, ASTM STP 905: fracture mechanics: seventeenth volume. In: Underwood JH, Chait R, Smith CW, Wilhelm DP, Andrews JC, Newman JC, editors. American Society for Testing and Materials, Philadelphia, Pennsylvania; 1986. p. 59–74.10.1520/STP17388S ↗
51. Crack closure behavior under high-load ratio conditions for Inconel-718 near threshold behavior10.1016/j.engfracmech.2008.09.009 ↗
52. A crack opening stress equation for fatigue crack growth10.1007/BF00020751 ↗
53. The Significance of Fatigue Crack Closure
54. Reconsideration of fatigue crack closure10.1016/0956-716X(92)90164-A ↗
55. Two critical stress intensities for threshold fatigue crack propagation10.1016/0956-716X(93)90538-4 ↗
56. Can DKeff be assumed as the driving force for fatigue crack growth?
57. Near-threshold fatigue: a review10.1016/S0142-1123(99)00053-5 ↗