High-cycle and very-high-cycle fatigue lifetime prediction of additively manufactured AlSi10Mg via crystal plasticity finite element method
Source abstract
Abstract
Abstract The effects of defects and building directions in additive manufactured AlSi10Mg on its high-cycle fatigue and very-high-cycle fatigue performance are studied based on crystal plasticity finite element (CPFE). Among the three models provided in this work, the results of model 2 (Np2) are in good agreement with the experimental ones. It is found the fatigue life of the sample with defects are much lower than that without defects. 0° specimens have a better fatigue performance than 90° ones. This work is beneficial in determining the fatigue lifetime and helps to improve the fatigue behavior of AlSi10Mg.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Aluminium alloys for automotive application10.4028/www.scientific.net/MSF.242.33 ↗
2. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
3. Powder metallurgical processing of a 2xxx series aluminum powder metallurgy metal alloy reinforced with AlN particulate additions10.1016/j.msea.2019.03.122 ↗
4. Mechanical properties of SLM-printed aluminium alloys: A review10.3390/ma13194301 ↗
5. 3D printing of aluminium alloys: Additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
6. Metal additive manufacturing: A review10.1007/s11665-014-0958-z ↗
7. Additive manufacturing of fatigue resistant materials: Challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
8. Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality10.1016/j.matdes.2016.05.041 ↗
9. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting10.1016/j.actamat.2016.06.009 ↗
10. Mechanical behavior of additive manufactured, powder-bed laser-fused materials10.1016/j.msea.2015.10.068 ↗
11. High cycle fatigue performance of AlSi10mg alloy produced by selective laser melting10.1016/j.mechmat.2020.103499 ↗
12. Fatigue properties and material characteristics of additively manufactured AlSi10Mg – Effect of the contour parameter on the microstructure, density, residual stress, roughness and mechanical properties10.1016/j.ijfatigue.2018.08.023 ↗
13. Fatigue life prediction for AlSi10Mg components produced by selective laser melting10.1016/j.ijfatigue.2019.04.015 ↗
14. Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
15. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
16. Location, location & size: defects close to surfaces dominate fatigue crack initiation10.1038/srep45239 ↗
17. The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures10.1016/j.matdes.2020.108708 ↗
18. Quality control of AlSi10Mg produced by SLM: Metallography versus CT scans for critical defect size assessment
19. The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion10.1016/j.ijfatigue.2021.106317 ↗
20. Fatigue assessment of laser additive manufactured AlSi12 eutectic alloy in the very high cycle fatigue (VHCF) range up to 1E9 cycles
21. The influence of laser parameters, scanning strategies and material on the fatigue strength of a stochastic porous structure
22. Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting10.1016/j.ijfatigue.2016.05.001 ↗
23. Effect of build orientation on mechanical properties and microstructure of Ti-6Al-4V manufactured by selective laser melting10.1007/s11661-019-05322-w ↗
24. Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting10.1016/j.matdes.2018.05.026 ↗
25. The influence of building direction on the fatigue crack propagation behavior of Ti6Al4V alloy produced by selective laser melting10.1016/j.msea.2019.138409 ↗
26. Revisiting fundamental welding concepts to improve additive manufacturing: from theory to practice10.1016/j.pmatsci.2019.100590 ↗
27. The exponential law of endurance tests
28. A study of the effects of cyclic thermal stresses on a ductile metal10.1115/1.4015020 ↗
29. Manson · 1953
30. Morrow · 1965 · 45
31. Evaluation of an energy-based approach and a critical plane approach for predicting constant amplitude multiaxial fatigue life10.1016/S0142-1123(99)00111-5 ↗
32. An energy-based fatigue life assessment model for various metallic materials under proportional and non-proportional loading conditions10.1016/j.ijfatigue.2006.07.017 ↗
33. Microstructure-sensitive critical plastic strain energy density criterion for fatigue life prediction across various loading regimes
34. The nature and the mechanism of crack initiation and early growth for very-high-cycle fatigue of metallic materials – An overview10.1016/j.tafmec.2017.05.002 ↗
35. High-cycle fatigue crack initiation and propagation behaviour of high-strength spring steel wires
36. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels10.1016/j.ijfatigue.2013.02.023 ↗
37. Observation of trapping sites of hydrogen and deuterium in high-strength steels by using secondary ion mass spectrometry10.2320/matertrans1989.36.1134 ↗
38. S-N curve characteristics and subsurface crack initiation behaviour in ultra-long life fatigue of a high carbon– chromium bearing steel10.1046/j.1460-2695.2001.00459.x ↗
39. On the mechanism of fatigue failure in the superlong life regime (N > 107 cycles), Part II: a fractographic investigation10.1046/j.1460-2695.2000.00343.x ↗
40. Effects of strength level and loading frequency on very-high-cycle fatigue behavior for a bearing steel10.1016/j.ijfatigue.2011.11.014 ↗
41. Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. I: Basic fatigue mechanism and evaluation of correlation between the fatigue fracture stress and the size and location of non-metallic inclusions10.1016/0142-1123(89)90054-6 ↗
42. The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels10.1016/j.ijfatigue.2015.11.029 ↗
43. Simulation-based strategies for microstructure-sensitive fatigue modeling10.1016/j.msea.2006.08.129 ↗
44. An energy-based microstructure model to account for fatigue scatter in polycrystals10.1016/j.jmps.2010.12.014 ↗
45. Microstructure-informed, predictive crystal plasticity finite element model of fatigue-dwells10.1016/j.commatsci.2020.109823 ↗
46. Examining metrics for fatigue life predictions of additively manufactured IN718 via crystal plasticity modeling including the role of simulation volume and microstructural constraints10.1016/j.msea.2020.139312 ↗
47. DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
48. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
49. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
50. Microstructure and mesh sensitivities of mesoscale surrogate driving force measures for transgranular fatigue cracks in polycrystals10.1016/j.msea.2015.05.048 ↗
51. Mesoscale modeling of microstructurally small fatigue cracks in metallic polycrystals10.1016/j.msea.2014.01.015 ↗
52. Microstructure-sensitive HCF and VHCF simulations10.1016/j.ijfatigue.2012.09.014 ↗
53. A mesoscale approach for growth of 3D microstructurally small fatigue cracks in polycrystals10.1177/1056789513513916 ↗
54. Microstructure-sensitive computational modeling of fatigue crack formation10.1016/j.ijfatigue.2010.01.003 ↗
55. Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes10.1016/j.ijfatigue.2020.106013 ↗
56. Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity10.1016/0022-5096(71)90010-X ↗
57. Constitutive analysis of elastic-plastic crystals at arbitrary strain10.1016/0022-5096(72)90017-8 ↗
58. Bounds and self-consistent estimates for creep of polycrystalline materials
59. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
60. Crystal plasticity10.1115/1.3167205 ↗
61. Representative Volume Element Size of a Polycrystalline Aggregate with Embedded Short Crack
62. Numerical evaluation of the representative volume element for random composites10.1016/j.euromechsol.2020.104181 ↗
63. Investigating mesh sensitivity and polycrystalline RVEs in crystal plasticity finite element simulations10.1016/j.ijplas.2019.06.001 ↗
64. Determination of the size of the Representative Volume Element (RVE) for the simulation of heterogeneous polymers at finite strains10.1016/j.finel.2016.05.004 ↗
65. Determination of the size of the representative volume element for random quasi-brittle composites10.1016/j.ijsolstr.2009.03.015 ↗
66. Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria10.1016/j.euromechsol.2018.04.011 ↗
67. A modification of Smith–Watson–Topper damage parameter for fatigue life prediction under non-proportional loading10.1111/j.1460-2695.2011.01620.x ↗
68. A modification of Morrow and Smith–Watson–Topper mean stress correction models10.1111/j.1460-2695.2011.01577.x ↗
69. Microstructure-based fatigue modelling with residual stresses: Prediction of the fatigue life for various inclusion sizes10.1016/j.ijfatigue.2019.06.018 ↗
70. Numerically predicted high cycle fatigue properties through representative volume elements of the microstructure10.1016/j.ijfatigue.2017.09.002 ↗