Determination of high cycle fatigue properties of a wide range of steel sheet grades from self-heating measurements
Source abstract
Abstract
The development of a self-heating method, based on self-heating measurements is proposed in order to predict S–N–P curves (i.e., amplitude stress-number of cycles to failure-probability of failure). Two dissipative phenomena can be observed on self-heating curves for the 16 steel grades of interest, the first for low amplitudes of cyclic loading and the second for higher amplitudes. In order to predict the fatigue properties accurately, a two scale probabilistic model, with two dissipative mechanisms (to account for the two dissipative phenomena) is proposed. Finally, the prediction made using the proposed approach is validated by its comparison with traditional fatigue tests, thus demonstrating time-saving advantages in the determination of steel grade fatigue properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. The determination of fatigue limits under alternating stress conditions10.1098/rspa.1914.0066 ↗
2. Krapez J-C, Pacou D. Thermography detection of early thermal effects during fatigue tests of steel and aluminium samples. In: AIP conference proceedings, vol. 615. 2002. p 1545–52.10.1063/1.1472977 ↗
3. Influence of hardening type on self-heating of metallic materials under cyclic loadings at low amplitude10.1016/j.euromechsol.2008.08.002 ↗
4. A new approach to characterizing and modeling the high cycle fatigue properties of cast materials based on self-heating measurements under cyclic loadings10.1016/j.ijfatigue.2012.09.005 ↗
5. Fast prediction of the Wöhler curve from heat build-up measurements on Short Fiber Reinforced Plastic10.1016/j.ijfatigue.2012.09.007 ↗
6. Fast evaluation of the fatigue lifetime of rubber-like materials based on a heat build-up protocol and micro-tomography measurements10.1016/j.ijfatigue.2010.02.014 ↗
7. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components10.1016/S0142-1123(99)00088-2 ↗
8. Fatigue limit evaluation of metals using an infrared thermographic technique10.1016/S0167-6636(97)00047-1 ↗
9. Krapez JC, Pacou D, Bertin C. In: Grinzato E, et al. editors, Application of lock-in thermography to a rapid evaluation of the fatigue limit in metals, 5th AITA. Venezia (Italy): Int. Workshop on Advanced Infrared Techn. and Appl.; 1997. p. 379–85.
10. Galtier A. PhD Thesis, Contribution à l’étude de l’endommagement des aciers sous sollicitations uni ou multi-axiales, école Nationale Sup. dArts et Métiers; 1993.
11. Determination of an HCF criterion by thermal measurements under biaxial cyclic loading10.1016/j.ijfatigue.2006.06.009 ↗
12. Rapid determination of fatigue life based on temperature evolution10.1016/j.ijfatigue.2013.04.002 ↗
13. Rapid determination of the fatigue curve by the thermographic method10.1016/S0142-1123(01)00107-4 ↗
14. A probabilistic two-scale model for high cycle fatigue life predictions10.1111/j.1460-2695.2005.00854.x ↗
15. Detection of fatigue macrocracks in 1100 aluminum from thermomechanical data10.1016/S0013-7944(99)00140-X ↗
16. Identification of the scatter in high cycle fatigue from temperature measurements10.1016/j.crme.2004.06.002 ↗
17. Weibull strength statistics for graphite fibres measured from the break progression in a model graphite/glass/epoxy microcomposite10.1007/BF01124848 ↗
18. Jeulin D. PhD Thesis, Modèles morphologiques de structures aléatoires et changement d’échelle, Universite de Caen; 1991.
19. Doudard C. PhD Thesis, Détermination rapide des propriétés en fatigue à grand nombre de cycles à partir d’essais d’échauffement, ENS Cachan; 2004.
20. Poncelet M. PhD Thesis, Multiaxialité, hétérogénéités intrinsèques et structurales des essais dauto-échauffement et de fatigue à grand nombre de cycles, ENS Cachan; 2010.
21. Probabilistic multiscale models and measurements of self-heating under multiaxial high cycle fatigue10.1016/j.jmps.2010.01.003 ↗
22. Prediction of self-heating measurements under proportional and non-proportional multiaxial cyclic loadings10.1016/j.crme.2007.01.002 ↗
23. Cugy P, Galtier A. Microplasticity and temperature increase in low carbon steel. In: Proceedings of the 8th international fatigue conference, vol. 1, Stockholm (Suède); 2002
24. Dissipative aspects in high cycle fatigue10.1016/j.mechmat.2009.01.018 ↗
25. Dissipative aspects in thermographic methods10.1111/j.1460-2695.2012.01701.x ↗
26. Mareau C. PhD Thesis, Modélisation micromécanique de l’échauffement et de la microplasticité des aciers sous sollicitation cyclique, ENSAM Metz; 2007.
27. Micromechanical modeling of the interactions between the microstructure and the dissipative deformation mechanisms in steels under cyclic loading10.1016/j.ijplas.2011.12.004 ↗
28. Danielou A, Galtier A, Verstavel JM. 2004, Influence de la vitesse de sollicitation sur les propriétés en fatigue, Note interne ArcelorMittal Research SA.
29. Munier R, Doudard C, Calloch S, Weber B. CETIM, Fatigue Design 2011 – Recueil de Conférences. Fatigue Design, Senlis (France); 2011.
30. Munier R. PhD Thesis, Etude de la fatigue des aciers laminés à partir de l’auto-échauffement sous sollicitation cyclique: essais, observations, modélisation et influence d’une pré-déformation plastique, Université de Bretagne Occidentale; 2012.
31. A rapid prediction method for very high cycle fatigue
32. Armstrong PJ, Frederick CO, A mathematical representation of the multiaxial Bauschinger effect. G.E.G.B., Report RD/B/N; 1966 731p.
33. An extension of the self-consistent scheme to plastically flowing polycristals10.1016/0022-5096(78)90003-0 ↗
34. On the plastic deformation of polycristals10.1016/0001-6160(61)90060-8 ↗
35. Denoual C. PhD Thesis, Approche probabiliste du comportement à l’impact du carbure de silicium: application aux blindages moyens, ENS Cachan; 1998.
36. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
37. Checking the fatigue limit from thermographic techniques by means of a probabilistic model of the epsilon-N field10.1016/j.ijfatigue.2011.02.008 ↗
38. Hétérogénéités des contraintes et rupture des matériaux fragiles
39. Fatigue design of structures under thermomechanical loadings10.1046/j.1460-2695.2002.00612.x ↗
40. Analysis of the fatigue strength of a stainless steel based on the energy dissipation10.1016/j.ijfatigue.2006.02.043 ↗
41. Temperature evolution during fatigue damage10.1016/j.intermet.2004.07.032 ↗