A crystal plasticity investigation of slip system interaction, GND density and stored energy in non-proportional fatigue in Nickel-based superalloy
Source abstract
Abstract
Abstract A dislocation and gradient-based crystal plasticity finite element study of fatigue has been carried out for nickel-based superalloy RR1000 in order to investigate detrimental non-proportional effects on fatigue life. Six differing multiaxial loading cycles including both proportional and non-proportional paths have been addressed and a critical stored energy density criterion employed for fatigue life. Non-proportional paths are shown to lead to higher numbers of intragranular slip system activations, reflecting experimental observations. These give higher geometrically necessary dislocation (GND) densities resulting from slip system interaction occurring through latent hardening effects in the model. The higher GND densities in turn drive up local stress and stored energy densities, thereby leading to lower predicted fatigue lives, in keeping with non-proportional fatigue experiments in the alloy considered. Intragranular slip system interaction may be the mechanistic explanation for non-proportional effects in fatigue of engineering alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Fatigue and fracture mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. High temperature nonproportional low cycle fatigue using fifteen loading paths10.1016/j.tafmec.2014.07.006 ↗
2. Multiaxial fatigue life prediction for powder metallurgy superalloy FGH96 based on stress gradient effect10.1016/j.ijfatigue.2017.12.006 ↗
3. Material dependence of multiaxial low cycle fatigue lives under non-proportional loading10.1016/j.ijfatigue.2010.12.001 ↗
4. A universally applicable multiaxial fatigue criterion in 2D cyclic loading10.1016/j.ijfatigue.2018.01.013 ↗
5. A stored energy criterion for fatigue crack nucleation in polycrystals10.1016/j.ijfatigue.2014.06.001 ↗
6. Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation?10.1016/j.ijplas.2017.11.005 ↗
7. Prediction of non-proportional cyclic hardening and multiaxial fatigue life for FCC and BCC metals under constant amplitude of strain cycling10.1016/j.msea.2016.01.029 ↗
8. Proportionally and non-proportionally perturbed fatigue of stainless steel10.1016/j.ijfatigue.2017.12.013 ↗
9. Multiaxial fatigue life prediction for various metallic materials based on the critical plane approach10.1016/j.ijfatigue.2010.07.003 ↗
10. Modelling multiaxial fatigue with a new combination of critical plane definition and energy-based criterion10.1016/j.ijfatigue.2017.12.004 ↗
11. A new approach of fatigue life prediction for metallic materials under multiaxial loading10.1016/j.ijfatigue.2015.02.022 ↗
12. A new life prediction model for multiaxial fatigue under proportional and non-proportional loading paths based on the pi-plane projection10.1016/j.ijfatigue.2017.04.013 ↗
13. The non-proportional behaviour of a nickel-based superalloy at room temperature, and characterisation of the additional hardening response by a modified cyclic hardening curve10.1016/j.ijfatigue.2014.02.023 ↗
14. Comparative study on biaxial low-cycle fatigue behaviour of three structural steels10.1111/j.1460-2695.2006.01061.x ↗
15. Multiaxial fatigue: from materials testing to life prediction10.1016/j.tafmec.2017.05.008 ↗
16. Multiaxial fatigue behavior of Ni-based superalloy GH4169 at 650°C10.1016/j.msea.2006.06.014 ↗
17. Multiaxial fatigue of extruded AZ61A magnesium alloy10.1016/j.ijfatigue.2010.09.020 ↗
18. Fatigue strain mapping via digital image correlation for Ni-based superalloys: the role of thermal activation on cube slip10.1016/j.msea.2017.04.002 ↗
19. Agbessi K, Saintier N, Palin-Luc T. Microstructure-based study of the crack initiation mechanisms in pure copper under high cycle multiaxial fatigue loading conditions. Procedia Struct. Integr., vol. 2, Elsevier B.V.; 2016, p. 3210–7. https://doi.org/10.1016/j.prostr.2016.06.400.10.1016/j.prostr.2016.06.400 ↗
20. A comparative assessment of iron and cobalt-based hard-facing alloy deformation using HR-EBSD and HR-DIC10.1016/j.actamat.2018.08.021 ↗
21. A new hardness formula incorporating the effect of source density on indentation response: a discrete dislocation plasticity analysis10.1016/j.surfcoat.2019.06.045 ↗
22. Nano-indentation characterization of Ni–Cu–Sn IMC layer subject to isothermal aging10.1016/j.tsf.2005.09.056 ↗
23. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
24. The deformation of plastically non-homogeneous materials
25. Crystal plasticity theory during the 1950s and 1960s10.1080/14786435.2013.822998 ↗
26. A statistical theory of flow stress and work-hardening10.1080/14786436608212647 ↗
27. A crystal plasticity FE model for deformation with twin nucleation in magnesium alloys10.1016/j.ijplas.2014.10.005 ↗
28. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
29. An integrated scheme for crystal plasticity analysis: Virtual grain structure generation10.1016/j.commatsci.2011.04.041 ↗
30. Microstructure based fatigue life prediction framework for polycrystalline nickel-base superalloys with emphasis on the role played by twin boundaries in crack initiation10.1016/j.actamat.2016.01.038 ↗
31. On the mechanistic basis of fatigue crack nucleation in Ni superalloy containing inclusions using high resolution electron backscatter diffraction10.1016/j.actamat.2015.06.035 ↗
32. The dislocation configurational energy density in discrete dislocation plasticity10.1016/j.jmps.2019.04.015 ↗
33. Discrete dislocation, crystal plasticity and experimental studies of fatigue crack nucleation in single-crystal nickel10.1016/j.ijplas.2019.10.003 ↗
34. On the macroscopic description of stored energy and self heating during plastic deformation10.1016/S0749-6419(97)00063-6 ↗
35. Partition of plastic work into heat and stored energy in metals10.1007/BF02325036 ↗
36. Geometrically necessary dislocation density distributions in cyclically deformed Ti-6Al-4V10.1016/j.actamat.2012.07.003 ↗
37. Local deformation patterns in Ti–6Al–4V under tensile, fatigue and dwell fatigue loading10.1016/j.ijfatigue.2012.03.001 ↗
38. Role of geometrically necessary dislocation density in multiaxial and non-proportional fatigue crack nucleation10.1016/j.ijfatigue.2020.105517 ↗