A crystal plasticity-based approach for creep-fatigue life prediction and damage evaluation in a nickel-based superalloy
Source abstract
Abstract
Abstract A numerical process based on crystal plasticity finite element (CPFE) was implemented to predict creep-fatigue crack initiation life. CPFE-based model can describe the macroscopic cyclic deformation and reveal grain-level damage mechanism. A new life prediction approach was then constructed by introducing fatigue and creep indicator parameters. Furthermore, a series of strain-controlled creep-fatigue tests in GH4169 superalloy at 650℃ were used to validate predicted accuracy of this model, where most of the data points lied within ±1.5 error band. Finally, a potential methodology for conservative creep-fatigue life evaluation was provided by flexible creep-fatigue damage summation rule in engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650°C10.1016/j.msea.2015.12.096 ↗
2. Failure of metals II: Fatigue10.1016/j.actamat.2015.05.050 ↗
3. Influence of high-temperature dwell time on creep-fatigue behavior in a 1000MW steam turbine rotor10.1016/j.engfracmech.2016.08.018 ↗
4. Creep–fatigue behavior at high temperature of a UDIMET 720 nickel-base superalloy10.1016/j.ijfatigue.2009.07.003 ↗
5. Effect of notches on creep–fatigue behavior of a P/M nickel-based superalloy10.1016/j.ijfatigue.2016.01.024 ↗
6. A local extrapolation based calculation reduction method for the application of constitutive material models for creep fatigue assessment10.1016/j.ijfatigue.2012.04.018 ↗
7. The effects of inhomogeneous microstructure and loading waveform on creep-fatigue behaviour in a forged and precipitation hardened nickel-based superalloy10.1016/j.ijfatigue.2017.01.002 ↗
8. Judgment criterion of the dominant factor of creep-fatigue crack growth in a nickel-based superalloy at elevated temperature10.1016/j.ijfatigue.2018.09.007 ↗
9. High temperature fatigue and creep-fatigue behaviors in a Ni-based superalloy: Damage mechanisms and life assessment10.1016/j.ijfatigue.2018.05.008 ↗
10. High-temperature low-cycle fatigue behavior of a 9Cr-ODS steel: Part 2 - hold time influence, microstructural evolution and damage characteristics10.1016/j.msea.2018.05.107 ↗
11. Creep-fatigue failure diagnosis10.3390/ma8115418 ↗
12. Assessment of creep-fatigue behavior, deformation mechanisms, and microstructural evolution of alloy 709 under accelerated conditions10.1016/j.ijfatigue.2019.02.037 ↗
13. Multi-axial creep-fatigue life prediction considering history-dependent damage evolution: A new numerical procedure and experimental validation10.1016/j.jmps.2019.04.016 ↗
14. Studies on creep-fatigue interaction behaviour of Alloy 617M10.1016/j.msea.2018.05.037 ↗
15. Shear band formation in plane strain compression10.1016/0001-6160(88)90193-9 ↗
16. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
17. A stored energy criterion for fatigue crack nucleation in polycrystals10.1016/j.ijfatigue.2014.06.001 ↗
18. Microstructure-sensitive fatigue crack nucleation in a polycrystalline Ni superalloy10.1016/j.ijfatigue.2016.04.013 ↗
19. Investigations of micro-notch effect on small fatigue crack initiation behaviour in nickel-based alloy GH4169: Experiments and simulations10.1016/j.ijfatigue.2020.105578 ↗
20. Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation?10.1016/j.ijplas.2017.11.005 ↗
21. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
22. Dwell fatigue crack nucleation model based on crystal plasticity finite element simulations of polycrystalline titanium alloys10.1016/j.jmps.2011.05.003 ↗
23. A cohesive zone model for fatigue and creep–fatigue crack growth in single crystal superalloys10.1016/j.ijfatigue.2008.11.002 ↗
24. Crystal viscoplasticity model for the creep-fatigue interactions in single-crystal Ni-base superalloy CMSX-810.1016/j.ijplas.2017.08.008 ↗
25. High- and Low-Cycle Fatigue Crack Initiation Using Polycrystal Plasticity10.1098/rspa.2003.1258 ↗
26. Low-cycle fatigue life prediction of a polycrystalline nickel-base superalloy using crystal plasticity modelling approach10.1016/j.jmst.2019.05.072 ↗
27. Strain-gradient modelling of grain size effects on fatigue of CoCr alloy10.1016/j.actamat.2014.06.044 ↗
28. Energy damage summation methods for crack initiation and growth during block loading in high-temperature low-cycle fatigue10.1111/j.1460-2695.1996.tb00967.x ↗
29. A re-interpretation of the BCR/VAMAS low cycle fatigue intercomparison programme using an energy criterion10.1080/09603409.1997.11689527 ↗
30. Energetic approach in thermomechanical fatigue for silicon molybdenum cast iron10.1179/mht.2000.17.3.001 ↗
31. Comparative assessment of dissipated energy and other fatigue criteria☆10.1016/j.ijfatigue.2007.01.007 ↗
32. Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior10.1016/j.ijfatigue.2017.10.014 ↗
33. S Taira, Lifetime of Structures Subjected to Varying Load and Temperature, Creep in structures, Berlin, Germany, 1962.10.1007/978-3-642-86014-0_6 ↗
34. Constitutive analysis of elastic-plastic crystals at arbitrary strain10.1016/0022-5096(72)90017-8 ↗
35. Strain localization in ductile single crystals10.1016/0022-5096(77)90001-1 ↗
36. Busso EP. Cyclic deformation of monocrystalline nickel aluminide and high temperature coatings. Massachusetts Institute of Technology; 1990.
37. Multiscale modelling of mechanical response in a martensitic steel: A micromechanical and length-scale-dependent framework for precipitate hardening10.1016/j.actamat.2014.08.012 ↗
38. Comparison of various 9–12%Cr steels under fatigue and creep-fatigue loadings at high temperature10.1016/j.msea.2011.05.046 ↗
39. The development of microstructural damage during high temperature creep–fatigue of a nickel alloy10.1016/j.ijfatigue.2012.07.016 ↗
40. Interaction of cyclic softening and stress relaxation of 9–12% Cr steel under strain-controlled fatigue-creep condition: Experimental and modeling10.1016/j.ijplas.2017.06.007 ↗
41. A mathematical representation of the multiaxial Bauscinger effect10.3184/096034007X207589 ↗
42. Micromechanics based fatigue life prediction of a polycrystalline metal applying crystal plasticity10.1016/j.mechmat.2015.01.020 ↗
43. Cyclic slip irreversibility and fatigue life: A microstructure-based analysis10.1016/j.actamat.2012.10.029 ↗
44. Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis10.1016/j.ijfatigue.2012.06.007 ↗
45. Mughrabi H, Wang R, Differt K, Essmann U. Fatigue crack initiation by cyclic slip irreversibility in high cycle fatigue. ASTM STP 811, 5-45.10.1520/STP30551S ↗
46. Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth
47. Distribution of normal stress at grain boundaries in multicrystals: application to an intergranular damage modeling10.1016/S0927-0256(02)00251-3 ↗
48. Discrete dislocation density modelling of single phase FCC polycrystal aggregates10.1016/j.actamat.2004.08.044 ↗
49. Enhancement of orientation gradients during simple shear deformation by application of simple compression10.1063/1.4922032 ↗
50. A multi-scale crystal plasticity model for cyclic plasticity and low-cycle fatigue in a precipitate-strengthened steel at elevated temperature10.1016/j.jmps.2016.12.010 ↗
51. A crystal plasticity investigation of slip system interaction, GND density and stored energy in non-proportional fatigue in Nickel-based superalloy10.1016/j.ijfatigue.2020.105782 ↗
52. Realistic microstructure-based modelling of cyclic deformation and crack growth using crystal plasticity10.1016/j.commatsci.2015.09.054 ↗
53. On the evolution of lattice deformation in austenitic stainless steels—The role of work hardening at finite strains10.1016/j.jmps.2011.09.008 ↗
54. Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models10.1016/j.cma.2014.05.003 ↗
55. A crystal plasticity study of cyclic constitutive behaviour, crack-tip deformation and crack-growth path for a polycrystalline nickel-based superalloy10.1016/j.engfracmech.2011.04.006 ↗
56. Crystal plasticity modeling of cyclic deformation for a polycrystalline nickel-based superalloy at high temperature10.1016/j.msea.2010.02.045 ↗
57. Gradient-dependent deformation of two-phase single crystals10.1016/S0022-5096(00)00006-5 ↗
58. The effect of δ phase on the microplasticity evolution of a heat-treated nickel base superalloy10.1016/j.mechmat.2020.103520 ↗
59. The energy density exhaustion method for assessing the creep-fatigue lives of specimens and components10.3184/096034013X13757890932442 ↗
60. The degree of damage at the French curve and at the fatigue limit during oscillating bend loading
61. Characterization of microplasticity developed during Fatigue
62. Grain size effect on the small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH416910.1016/j.engfracmech.2015.01.002 ↗
63. Small fatigue crack initiation and growth mechanisms of nickel-based superalloy GH4169 at 650°C in air10.1016/j.engfracmech.2015.12.014 ↗
64. Thakker AB, Cowles BA. Low strain, long life creep fatigue of AF2-1DA and INCO 718; 1983.
65. A. E-606, Standard test method for strain-controlled fatigue testing. In: Annual Book of ASTM Standards. West Conshohocken: ASTM; 2012.
66. High-temperature time-dependent fatigue behaviour of several engineering structure alloys
67. Creep-fatigue behaviors and life assessments in two nickel-based superalloys10.1115/1.4039779 ↗
68. Creep-fatigue life prediction and interaction diagram in nickel-based GH4169 superalloy at 650°C based on cycle-by-cycle concept10.1016/j.ijfatigue.2016.11.021 ↗
69. Creep – fatigue damage accumulation and interaction diagram based on metallographic interpretation of mechanisms10.3184/096034007X300494 ↗
70. ASME and Boiler Pressure Vessel Code Section XI, Division 1, Code Case N-47; 1996.