Fretting fatigue characteristics of Ti-6Al-4V alloy with a gradient nanostructured surface layer induced by ultrasonic surface rolling process
Source abstract
Abstract
Abstract A gradient nanostructured (GNS) surface layer is synthesized on the surface of a Ti-6Al-4V alloy by means of the ultrasonic surface rolling process (USRP). The mean grain sizes on the topmost surface and at depth of 10 μm from the treated surface are approximately 45.8 and 87.5 nm, respectively. Fretting fatigue (FF) testing shows a 113.6% improvement in the fatigue strength after USRP as compared with the untreated condition. The mechanism through which the USRP improves the FF properties can be attributed to the comprehensive effect of the compressive residual stress, GNS surface layer, surface work hardening, and surface roughening. Among these, the compressive residual stress is the main factor in determining the FF behavior, due to the beneficial effect of compressive residual stress on the suppression of FF crack initiation and premature growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Effect of shot blasting on plain fatigue and fretting fatigue behaviour of Al-Mg-Si alloy AA606110.1016/j.ijfatigue.2004.07.007 ↗
2. Plain fatigue and fretting fatigue behaviour of plasma nitrided Ti-6Al-4V10.1016/j.matlet.2007.12.025 ↗
3. A study on fretting fatigue characteristics of Inconel 690 at high temperature10.1016/j.triboint.2010.11.006 ↗
4. Fretting fatigue characteristic of Ti-6Al-4V strengthened by wet peening10.1016/j.ijfatigue.2015.12.013 ↗
5. High cycle fatigue in aircraft gas turbines - an industry perspective10.1007/BF00012667 ↗
6. Fretting fatigue behaviour of shot-peened Ti-6Al-4V at room and elevated temperatures10.1046/j.1460-2695.2003.00677.x ↗
7. Effect of shot peening factors on fretting fatigue resistance titanium alloy
8. Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films deposited on Ti-6Al-4V alloy10.1016/j.apsusc.2014.06.006 ↗
9. Influence of plasma molybdenizing and shot-peening on fretting damage behavior of titanium alloy10.1016/j.apsusc.2016.08.146 ↗
10. Effects of plasma ZrN metallurgy and shot peening duplex treatment on fretting wear and fretting fatigue behavior of Ti6Al4V alloy10.3390/ma9040217 ↗
11. Effect of the ultrasonic surface rolling process on the fretting fatigue behavior of Ti-6Al-4V alloy10.3390/ma10070833 ↗
12. Effect of shot peening on fretting fatigue of Ti811 alloy at elevated temperature10.1016/j.ijfatigue.2008.10.004 ↗
13. Behaviour of shot peening combined with WC-CoHVOF coating under complex fretting wear and fretting fatigue loading conditions10.1016/j.surfcoat.2006.08.094 ↗
14. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel10.1016/S0142-1123(01)00205-5 ↗
15. Experimental results in fretting fatigue with shot and laser peened Al 7075–T651 specimens10.1016/j.ijfatigue.2011.12.014 ↗
16. On the effect of shot-peening on fretting fatigue of A17075–T6 under cyclic normal contact loading10.1016/j.surfcoat.2017.08.067 ↗
17. Effect of severe shot peening on microstructure and fatigue strength of cast iron10.1016/j.ijfatigue.2013.08.022 ↗
18. Nanoscale surface modification of AISI 316L stainless steel by severe shot peening10.1016/j.matdes.2016.03.162 ↗
19. Effects of laser shock processing on microstructure and mechanical properties of K403 nickel-alloy10.1016/j.matdes.2015.10.022 ↗
20. Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts10.1016/j.actamat.2017.01.050 ↗
21. Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening10.1016/S0921-5093(00)00686-9 ↗
22. Hot corrosion behaviour of Ti-6Al-4V modified by ultrasonic shot peening10.1016/j.matdes.2016.07.133 ↗
23. On the effect of deep-rolling and laser-peening on the stress-controlled low- and high-cycle fatigue behavior of Ti–6Al–4V at elevated temperatures up to 550 °C10.1016/j.ijfatigue.2012.03.008 ↗
24. The effect of ultrasonic impact treatment on the deformation behavior of commercially pure titanium under uniaxial tension10.1016/j.matdes.2017.01.006 ↗
25. Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer10.1016/j.actamat.2014.12.057 ↗
26. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment10.1016/j.msea.2003.10.261 ↗
27. Lowering coefficient of friction in Cu alloys with stable gradient nanostructures10.1126/sciadv.1601942 ↗
28. The gradient crystalline structure and microhardness in the treated layer of TC17 via high energy shot peening10.1016/j.apsusc.2015.09.013 ↗
29. Face-centered titanium induced by ultrasonic surface rolling process in Ti-6Al-4V alloy and its tensile behavior10.1016/j.matchar.2018.09.004 ↗
30. Gradient nanostructure and residual stresses induced by ultrasonic nano-crystal surface modification in 304 austenitic stainless steel for high strength and high ductility10.1016/j.msea.2014.06.114 ↗
31. Surface nanocrystallization of 17–4 precipitation-hardening stainless steel subjected to ultrasonic surface rolling process10.1016/j.msea.2018.04.033 ↗
32. Effect of ultrasonic nanocrystal surface modification on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy10.1016/j.msea.2017.11.043 ↗
33. Gradient crystalline structure induced by ultrasonic impacting and rolling and its effect on fatigue behavior of TC11 titanium alloy10.1016/j.rinp.2017.05.026 ↗
34. Nanocrystallization and enhanced surface mechanical properties of commercial pure titanium by electropulsing-assisted ultrasonic surface rolling10.1016/j.matdes.2018.04.027 ↗
35. Effect of ultrasonic nanocrystal surface modification on elevated temperature residual stress, microstructure, and fatigue behavior of ATI 718Plus alloy10.1016/j.ijfatigue.2018.01.017 ↗
36. Improvement of the fatigue strength of SUS304 austenite stainless steel using ultrasonic nanocrystal surface modification10.1016/j.surfcoat.2012.12.033 ↗
37. Effects of combined plasma chromizing and shot peening on the fatigue properties of a Ti6Al4V alloy10.1016/j.apsusc.2015.07.038 ↗
38. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
39. Microstructure and surface properties of 17–4PH stainless steel by ultrasonic surface rolling technology10.1016/j.surfcoat.2017.04.052 ↗
40. Laser shock processing and its effects on microstructure and properties of metal alloys: a review10.1016/S0142-1123(02)00022-1 ↗
41. Effect of ultrasonic surface rolling at low temperatures on surface layer microstructure and properties of HIP Ti-6Al-4V alloy10.1016/j.surfcoat.2017.01.099 ↗
42. The effects of deep rolling and shot peening on fretting fatigue resistance of Aluminum-7075-T610.1016/j.msea.2009.03.020 ↗
43. Residual stress relaxation and low- and high-cycle fatigue behavior of shot-peened medium-carbon steel10.1016/j.ijfatigue.2013.07.001 ↗
44. Evolution of surface mechanical properties and microstructure of Ti-6Al-4V alloy induced by electropulsing-assisted ultrasonic surface rolling process10.1016/j.jallcom.2016.04.067 ↗
45. Effect of different surface asperities and surface hardness induced by shot-peening on the fretting wear behavior of Ti-6Al-4V10.1016/j.surfcoat.2018.06.092 ↗
46. On the mechanism of residual stresses relaxation in welded joints under cyclic loading10.1016/j.ijfatigue.2017.08.016 ↗
47. Evolution of residual stress redistribution associated with localized surface microcracking in shot-peened medium-carbon steel during fatigue test10.1016/j.ijfatigue.2013.06.010 ↗
48. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment10.1016/j.scriptamat.2006.01.049 ↗
49. Residual-stress and surface-roughness in fretting fatigue10.1088/0022-3727/25/1A/036 ↗
50. Fretting fatigue of rough surfaces10.1016/j.wear.2007.06.016 ↗
51. Effect of frequency on very high cycle fatigue behavior of a low strength Cr–Ni–Mo–V steel welded joint10.1016/j.ijfatigue.2015.03.027 ↗
52. Very high cycle fatigue behavior of a low strength welded joint at moderate temperature10.1016/j.ijfatigue.2012.01.014 ↗
53. Fatigue life and mechanistic modeling of interior micro-defect induced cracking in high cycle and very high cycle regimes10.1016/j.actamat.2018.07.036 ↗
54. Study on bending fretting fatigue damages of 7075 aluminum alloy10.1016/j.triboint.2012.06.016 ↗
55. Effect of shot peening on the fretting wear of Ti-6Al-4V10.1016/S0043-1648(01)00671-8 ↗
56. Effects of fretting fatigue on the residual stress of shot peened Ti-6Al-4V samples10.1016/j.msea.2005.02.028 ↗
57. Effects of compressive residual stress on short fatigue crack growth in a nickel-based superalloy10.1016/j.ijfatigue.2017.11.010 ↗
58. Effects of laser peening on residual stresses and fatigue crack growth properties of Ti-6Al-4V titanium alloy10.1016/j.optlaseng.2013.06.011 ↗
59. Investigation of the stress intensity factor changing on the hole crack subject to laser shock processing10.1016/j.matdes.2008.09.033 ↗
60. Effect of fretting on fatigue performance of Ti-1023 titanium alloy10.1016/j.wear.2013.10.010 ↗
61. Effect of addition of oxygen and water vapor on fretting fatigue properties of an austenitic stainless steel in hydrogen10.1016/j.ijhydene.2014.12.129 ↗
62. Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling10.1016/j.ijfatigue.2015.08.007 ↗
63. Effect of stress relief groove on fretting fatigue strength and index for the selection of optimal groove shape10.1016/j.ijfatigue.2008.07.007 ↗
64. Identification of fretting fatigue crack propagation mechanisms using acoustic emission10.1016/j.triboint.2010.06.009 ↗