Notch-defect interaction in additively manufactured Inconel 718
Source abstract
Abstract
Abstract Powder bed fusion based additively manufactured components are known to have poor surface quality, especially when building downward facing surfaces. These surfaces can contain defects, from which fatigue cracks can be initiated. In this work the notched fatigue behaviour of Inconel 718 specimens produced by selective laser melting is investigated. The main focus is set on the interaction between notch geometries and local defects due to the amount of overhang in the notch region. Four different geometries are considered, with different amount of notch acuities and degree of downward facing surfaces. A variation in failure sites, with respect to the notch bisector line, was fond in the specimens, and the position was found to be dependent on the amount of overhang and notch acuity. The fatigue life was found to be dependent on the size of surface defects measured in fracture surfaces. Further, the use of average strain energy density as a failure criteria in additively manufactured metals is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V10.1016/j.ijfatigue.2018.07.013 ↗
2. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
3. Additive manufacturing of metallic components and properties10.1016/j.pmatsci.2017.10.001 ↗
4. Additive manufacturing of fatigue resistant materials: challenges and opportunities10.1016/j.ijfatigue.2017.01.001 ↗
5. Directional and notch effects on the fatigue behavior of as-built DMLS Ti6Al4V10.1016/j.ijfatigue.2017.10.004 ↗
6. Optimization of scan strategies in selective laser melting of aluminum parts with downfacing areas10.1115/1.4028620 ↗
7. Research on the fabricating quality optimization of the overhanging surface in SLM process10.1007/s00170-012-4271-4 ↗
8. Overview of materials qualification needs for metal additive manufacturing10.1007/s11837-015-1810-0 ↗
9. Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects10.1016/j.ijfatigue.2018.07.035 ↗
10. The effectiveness of hot isostatic pressing for closing porosity in titanium parts manufactured by selective electron beam melting10.1007/s11661-016-3429-3 ↗
11. XCT analysis of the influence of melt strategies on defect population in Ti6Al4V components manufactured by selective electron beam melting10.1016/j.matchar.2015.02.008 ↗
12. Fatigue behavior of porous Ti-6Al-4V made by laser-engineered net shaping10.3390/ma11020284 ↗
13. The influence of porosity on fatigue crack initiation in additively manufactured titanium components10.1038/s41598-017-06504-5 ↗
14. surface roughness and hip on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing10.1016/j.ijfatigue.2018.07.020 ↗
15. An analysis of defects influence on axial fatigue strength of maraging steel specimens produced by additive manufacturing10.1016/j.ijfatigue.2018.08.034 ↗
16. Fatigue life of additively manufactured Ti6Al4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.05.018 ↗
17. Defect analysis and fatigue design basis for ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
18. Stress concentration
19. Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches10.1016/j.mser.2013.11.001 ↗
20. Averaged strain energy density evaluated rapidly from the singular peak stresses by FEM: cracked components under mixed-mode (i+ii) loading10.1016/j.tafmec.2015.08.001 ↗
21. Rapid finite element evaluation of the averaged strain energy density of mixed-mode (i+ii) crack tip fields including the t-stress contribution10.1111/ffe.12439 ↗
22. Averaged strain energy density estimated rapidly from the singular peak stresses by FEM: cracked bars under mixed-mode (i+iii) loading10.1016/j.engfracmech.2016.03.040 ↗
23. Fatigue strength of blunt v-notched specimens produced by selective laser melting of Ti-6Al-4V10.1016/j.tafmec.2017.06.021 ↗
24. Evaluation of notched fatigue strength at elevated temperature by linear notch mechanics10.1016/S0142-1123(99)00081-X ↗
25. Fatigue strength of Inconel 718 at elevated temperatures10.1046/j.1460-2695.2000.00263.x ↗
26. Notched fatigue testing of Inconel 718 prepared by selective laser melting
27. Long fatigue crack growth in Inconel 718 produced by selective laser melting10.1016/j.ijfatigue.2016.03.012 ↗
28. Neuber · 1958
29. ber die bercksichtigung der spannungskonzentration bei festigkeitsberechnungen
30. Sulle condizioni di resistenza dei corpi elastici, rend. r. ist. lombardo di scienze
31. A fracture criterion for three-dimensional crack problems10.1016/0013-7944(74)90068-X ↗
32. Mechanics of Fracture Initiation and Propagation. Kluwer; 1991.
33. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp v-shaped notches10.1023/A:1013595930617 ↗
34. A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches10.1007/BF00018497 ↗
35. On the stress distribution at the base of a stationary crack10.1115/1.4011454 ↗
36. Fatigue strength of severely notched specimens made of Ti6Al4V under multiaxial loading10.1111/ffe.12272 ↗
37. Notched Ti-6Al-4V titanium bars under multiaxial fatigue: synthesis of crack initiation life based on the averaged strain energy density10.1016/j.tafmec.2018.06.010 ↗
38. Crack initiation life in notched steel bars under torsional fatigue: synthesis based on the averaged strain energy density approach10.1016/j.ijfatigue.2016.12.022 ↗
39. Notch sensitivity and defect sensitivity under fatigue loading: two sides of the same medal10.1023/A:1007686727207 ↗
40. From Neuber’s elementary volume to Kitagawa and Atzori’s diagrams: an interpretation based on local energy10.1007/s10704-005-4393-x ↗
41. Applicability of fracture mechanics to very small cracks or cracks in the early stage
42. Pilkey · 2008
43. ASTM E407-07(2015)e1. Standard Practice for Microetching Metals and Alloys. West Conshohocken, PA: ASTM International; 2015. .
44. Inconel alloy 718, Tech. rep. Special Metals; 2018.
45. Low-cycle fatigue behaviour of AISI 18NI300 maraging steel produced by selective laser melting10.3390/met8010032 ↗
46. The linear-elastic theory of critical distances to estimate high-cycle fatigue strength of notched metallic materials at elevated temperatures10.1111/ffe.12273 ↗
47. Neuber · 1958