Influence of solution treatment on the corrosion fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy
Source abstract
Abstract
Abstract In this work, the corrosion fatigue behaviors of an as-forged Mg-6.7%Zn-1.3%Y-0.6%Zr alloy before and after solid solution treatment (T4) in 3.5 wt% NaCl solution have been investigated and compared. S-N curves showed that the fatigue strength of as-forged samples corresponding to 5 × 106 cycles was 30 MPa, whereas the fatigue strength of T4 samples was 50 MPa. Fracture observations showed that for the as-forged samples, fatigue cracks mainly initiated at localized corrosion sites on sample surfaces. However, for the T4 samples, the crack initiation was respectively related to the localized corrosion and TB cracking at low and high stress amplitudes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. What is going on in magnesium alloys?10.1016/j.jmst.2017.07.019 ↗
2. Precipitation behavior and mechanical properties of a Mg-Zn-Y-Zr alloy processed by thermo-mechanical treatment10.1016/j.jallcom.2004.10.070 ↗
3. Influence of higher Zn/Y ratio on the microstructure and mechanical properties of Mg-Zn-Y-Zr alloys10.1007/s11661-009-9817-1 ↗
4. Solidification and microstructure control of Mg-rich alloys in the Mg-Zn-Y ternary system
5. Effects of icosahedral phase formation on the microstructure and mechanical improvement of Mg alloys: a review10.1016/j.pnsc.2012.09.005 ↗
6. Effect of yttrium content on the ultra-high cycle fatigue behavior of Mg-Zn-Y-Zr alloys10.4028/www.scientific.net/MSF.816.333 ↗
7. Crack initiation mechanism of extruded AZ31 magnesium alloy in the very high cycle fatigue regime10.1016/j.msea.2008.02.003 ↗
8. Ultra-high cycle fatigue behavior of the as-extruded magnesium alloy ZK60
9. Very high cycle fatigue tests with smooth and notched specimens and screws made of light metal alloys10.1016/j.ijfatigue.2005.05.015 ↗
10. Corrosion fatigue behavior of die-cast and shot-blasted AM60 magnesium alloy10.1016/j.msea.2010.11.033 ↗
11. Effect of frequency on fatigue crack growth behavior of magnesium alloy AZ61 under immersed 3.5 mass% NaCl environment10.1016/j.msea.2010.12.048 ↗
12. Corrosion fatigue behavior of extruded magnesium alloy AZ31 in sodium chloride solution10.1016/j.ijfatigue.2007.09.005 ↗
13. Effects of humidity and temperature on the fatigue behaviour of an extruded AZ61 magnesium alloy10.1111/j.1460-2695.2005.00775.x ↗
14. Corrosion fatigue behavior of extruded magnesium alloy AZ80-T5 in a 5% NaCl environment10.1016/j.engfracmech.2010.03.032 ↗
15. Dong C. Effect of corrosion attack on the fatigue behavior of an as-cast Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy10.1016/j.matdes.2015.06.109 ↗
16. Effects of ECAE temperature and billet orientation on the microstructure, texture evolution and mechanical properties of a Mg-Zn-Y-Zr alloy10.1016/j.msea.2008.09.048 ↗
17. Superplastic behaviors of a Mg-Zn-Y-Zr alloy processed by extrusion and equal channel angular extrusion10.1016/j.jallcom.2008.10.089 ↗
18. The microstructure and properties of cyclic extrusion compression treated Mg-Zn-Y-Nd alloy for vascular stent application10.1016/j.jmbbm.2011.12.011 ↗
19. The role of second phases in the corrosion behavior of Mg-5Zn alloy10.1016/j.corsci.2012.03.030 ↗
20. Initial stages of corrosion within Mg-Zn-Y-Zr alloy in 1 g/l NaCl solution10.1023/A:1004734725783 ↗
21. Effect of second phases on the corrosion behaviour of wrought Mg-Zn-Y-Zr alloy10.1016/j.corsci.2010.02.017 ↗
22. Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media10.1016/j.electacta.2008.06.001 ↗
23. Effect of heat treatment on the corrosion resistance and mechanical properties of an as-forged Mg-Zn-Y-Zr alloy10.1016/j.corsci.2014.12.008 ↗
24. Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments10.1016/j.ijfatigue.2008.02.012 ↗
25. A note on the deformation of fine grained magnesium alloys10.1016/0956-716X(92)90102-K ↗
26. Influence of grain size on the compressive deformation of wrought Mg-3Al-1Zn10.1016/j.actamat.2004.07.015 ↗
27. A rationale for the strong dependence of mechanical twinning on grain size10.1016/j.scriptamat.2008.05.027 ↗
28. Reducing the tension-compression yield asymmetry in a Mg-8Al-0.5 Zn alloy via precipitation10.1016/j.scriptamat.2009.11.024 ↗
29. Age hardening in a Mg-9 wt.% Al alloy10.1016/0001-6160(68)90109-0 ↗
30. Enhanced very high cycle fatigue performance of extruded Mg-12Gd-3Y-0.5Zr magnesium alloy10.1016/j.msea.2010.12.092 ↗
31. Effect of solution treatment on the fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy10.1038/srep23955 ↗
32. Composition and microstructure dependent corrosion behaviour of Mg-Li alloys10.1016/j.electacta.2017.11.091 ↗
33. Corrosion characterization of Mg-8Li alloy in NaCl solution10.1016/j.corsci.2009.03.011 ↗
34. Corrosion fatigue of a magnesium alloy in modified simulated body fluid10.1016/j.engfracmech.2014.07.007 ↗
35. Pitting-induced hydrogen embrittlement of magnesium-aluminium alloy10.1016/j.matdes.2012.06.007 ↗
36. Corrosion behaviour of magnesium/aluminium alloys in 3.5 wt.% NaCl10.1016/j.corsci.2007.11.005 ↗
37. Corrosion fatigue behaviors of two biomedical Mg alloys-AZ91D and WE43-In simulated body fluid10.1016/j.actbio.2010.07.026 ↗
38. Corrosion fatigue fracture of magnesium alloys in bioimplant applications: a review10.1016/j.engfracmech.2014.08.009 ↗
39. A review of stress-corrosion cracking and corrosion fatigue of magnesium alloys for biodegradable implant applications10.1007/s11837-015-1366-z ↗
40. Hydrogen embrittlement of magnesium and magnesium alloys: a review10.1149/2.023304jes ↗
41. A critical review of the stress corrosion cracking (SCC) of magnesium alloys10.1002/adem.200500071 ↗
42. Environmentally-induced cracking of magnesium10.1016/0010-938X(84)90017-9 ↗
43. Magnesium alloys as body implants: fracture mechanism under dynamic and static loadings in a physiological environment10.1016/j.actbio.2011.10.031 ↗
44. In-vitro characterization of stress corrosion cracking of aluminium-free magnesium alloys for temporary bio-implant applications10.1016/j.msec.2014.06.018 ↗
45. The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys10.1016/j.corsci.2012.08.037 ↗
46. The localised corrosion of Mg alloy AZ31 in chloride containing electrolyte studied by a scanning vibrating electrode technique10.1016/j.electacta.2013.07.134 ↗
47. The behaviour of magnesium during free corrosion and potentiodynamic polarization investigated by real-time hydrogen measurement and optical imaging10.1016/j.electacta.2013.12.109 ↗
48. Localized corrosion of magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique10.1149/1.2918900 ↗
49. The source of hydrogen evolved from a magnesium anode10.1016/j.elecom.2013.08.023 ↗
50. A novel approach to on-line measurement of gas evolution kinetics: application to the negative difference effect of Mg in chloride solution10.1016/j.electacta.2013.07.131 ↗
51. Effect of pH on the grain size dependence of magnesium corrosion10.5006/i0010-9312-68-6-507 ↗
52. A study on magnesium corrosion by real-time imaging and electrochemical methods: relationship between local processes and hydrogen evolution10.1016/j.electacta.2016.03.043 ↗
53. Towards a physical description for the origin of enhanced catalytic activity of corroding magnesium surfaces10.1016/j.electacta.2013.11.086 ↗
54. Corrosion mechanism and hydrogen evolution on Mg10.1016/j.cossms.2014.09.005 ↗
55. Localized corrosion of binary Mg-Nd alloys in chloride-containing electrolyte using a scanning vibrating electrode technique10.5006/i0010-9312-68-6-489 ↗
56. Grain character influences on corrosion of ECAPed pure magnesium10.1179/147842209X12559428167805 ↗
57. Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy10.1016/j.corsci.2009.10.018 ↗
58. Fatigue of magnesium alloys10.1002/adem.200400021 ↗
59. Bettles · 2012
60. The texture and anisotropy of magnesium-zinc-rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
61. The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys10.1016/S1359-6454(03)00005-3 ↗
62. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
63. Effect of the crystallographic orientation and twinning on the corrosion resistance of an as-extruded Mg-3Al-1Zn (wt.%) bar10.1016/j.scriptamat.2014.06.015 ↗
64. Influence of load frequency and ageing heat treatment on fatigue crack propagation rate of as-extruded AZ61 alloy10.1016/j.ijfatigue.2008.07.005 ↗
65. The surface, microstructure and corrosion of magnesium alloy AZ31 sheet10.1016/j.electacta.2010.02.068 ↗
66. Characterization of corrosion interfaces by the scanning kelvin probe force microscopy technique10.1149/1.1359199 ↗
67. Influence of dichromate ions on corrosion processes on pure magnesium10.1149/1.1554721 ↗
68. Hydrogen embrittlement in a Mg-Al alloy10.1007/BF02644454 ↗
69. Effect of hydrogen on stress corrosion cracking of magnesium alloy in 0.1 M Na2SO4 solution10.1016/j.msea.2007.11.035 ↗
70. Stress corrosion cracking and liquid metal embrittlement in pure magnesium10.5006/1.3583907 ↗
71. On the fractography of transgranular stress corrosion failures in a Mg-Al alloy10.5006/0010-9312-31.7.247 ↗
72. Metzger · 1959
73. Crystallography of stress corrosion cracking in pure magnesium10.5006/1.3579294 ↗
74. Hydrogen embrittlement phenomena and mechanisms10.1515/corrrev-2012-0502 ↗
75. Fracture toughness and hydrogen-assisted crack growth in engineering alloys
76. Intergranular stress corrosion crack propagation in hot-rolled AZ31 Mg alloy sheet10.1016/j.msea.2014.02.077 ↗
77. The crystallographic characteristics of fracture in magnesium single crystals10.1016/0001-6160(57)90075-5 ↗
78. Hydrogen embrittlement of metals: a primer for the failure analyst10.1007/s11668-008-9133-x ↗
79. Transgranular stress corrosion cracking of solution treated and qeenched Mg-8.6 Al alloy10.5006/0010-9312-27.8.334 ↗
80. Relationship between fatigue crack initiation and activated twins in as-extruded pure magnesium10.1016/j.scriptamat.2013.08.006 ↗
81. Twinning-assisted environmental cracking: a new cracking mechanism for the crash-resistant novel TWIP steels10.1016/j.scriptamat.2012.08.022 ↗