Competing crack initiation behaviors of a laser additively manufactured nickel-based superalloy in high and very high cycle fatigue regimes
Source abstract
Abstract
Abstract Ultrasonic fatigue tests were performed to investigate high and very high cycle fatigue behaviors of a laser additively manufactured Inconel 718 (IN718) alloy in the as-deposited condition. The results indicate that the competition failure behavior between the surface and interior crack initiation results in the separate S-N curve. Both manufacturing defects (e.g., gas pore, lack of fusion) and columnar grains (matrix) observed in the microstructure could act as the original fatigue micro-cracks due to the effective restriction on manufacturing defects. The fatigue sensitivity levels increase successively in terms of the type, size, and location of the maximal micro-crack.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
2. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
3. Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing10.1126/science.aax7616 ↗
4. Scientific, technological and economic issues in metal printing and their solutions10.1038/s41563-019-0408-2 ↗
5. Scalable submicrometer additive manufacturing10.1126/science.aax8760 ↗
6. Microstructural and texture development in direct laser fabricated IN71810.1016/j.matchar.2013.12.012 ↗
7. Hot isostatic pressing of IN718 components manufactured by selective laser melting
8. Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime10.1016/j.ijfatigue.2016.05.018 ↗
9. Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting10.1016/j.ijfatigue.2018.08.002 ↗
10. Overview: additive manufacturing enabled accelerated design of Ni-based alloys for improved fatigue life
11. Stress ratio effect on notched fatigue behavior of a Ti-8Al-1Mo-1V alloy in the very high cycle fatigue regime10.1016/j.ijfatigue.2018.05.032 ↗
12. Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion10.1016/j.msea.2019.06.003 ↗
13. On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading10.1016/j.msea.2016.05.089 ↗
14. Very high cycle fatigue behaviors of a turbine engine blade alloy at various stress ratios10.1016/j.ijfatigue.2016.11.032 ↗
15. Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy10.1016/j.ijfatigue.2016.06.003 ↗
16. Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength10.1016/S0142-1123(02)00037-3 ↗
17. VHCF response of as-built SLM AlSi10Mg specimens with large loaded volume10.1111/ffe.12830 ↗
18. Comparison of the very high cycle fatigue behaviors of INCONEL 718 with different loading frequencies10.1007/s11433-013-5013-9 ↗
19. Small crack behavior and fracture of nickel-based superalloy under ultrasonic fatigue10.1016/j.ijfatigue.2005.07.022 ↗
20. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
21. Piezoelectric fatigue testing machines and devices10.1016/j.ijfatigue.2005.09.020 ↗
22. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
23. The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity10.1016/j.matdes.2018.04.022 ↗
24. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: densification, microstructure and properties10.1016/j.jallcom.2013.09.171 ↗
25. Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting10.1016/j.msea.2018.03.127 ↗
26. Study on microstructure and mechanical properties of laser rapid forming Inconel 71810.1016/j.msea.2007.05.079 ↗
27. Crack initiation sensitivity of wrought direct aged alloy 718 in the very high cycle fatigue regime: the role of non-metallic inclusions10.1016/j.msea.2016.09.098 ↗
28. Effect of microstructure on small fatigue crack initiation and early propagation behavior in Mg-10Gd-3Y-0.3Zr alloy10.1016/j.ijfatigue.2018.10.002 ↗
29. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
30. Effect of stress ratio on long life fatigue behavior of high carbon chromium bearing steel under axial loading10.1016/j.ijfatigue.2005.04.018 ↗
31. Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime10.1016/j.ijfatigue.2005.08.015 ↗
32. Factors influencing the mechanism of superlong fatigue failure in steels10.1046/j.1460-2695.1999.00187.x ↗
33. Murakami · 2002
34. Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels10.1016/j.ijfatigue.2013.02.023 ↗
35. Fatigue life and mechanistic modeling of interior micro-defect induced cracking in high cycle and very high cycle regimes10.1016/j.actamat.2018.07.036 ↗
36. Long fatigue crack growth in Inconel 718 produced by selective laser melting10.1016/j.ijfatigue.2016.03.012 ↗
37. The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels10.1016/j.ijfatigue.2015.11.029 ↗
38. Effects of vacuum environment on small fatigue crack propagation in Ti–6Al–4V10.1016/j.ijfatigue.2016.05.024 ↗
39. Through thickness property variations in friction stir welded AA6061 joint fatigued in very high cycle fatigue regime10.1016/j.ijfatigue.2015.08.013 ↗
40. Applicability of fracture mechanics to very small cracks or the cracks in the early stage
41. Prediction of non propagating cracks10.1016/0013-7944(79)90081-X ↗
42. Matsunaga, Effect of defects on the fatigue limit of Ni-based superalloy 718 with different grain sizes10.1111/ffe.12989 ↗
43. A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes10.1016/j.ijfatigue.2016.06.020 ↗
44. Small crack growth model from low to very high cycle fatigue regime for internal fatigue failure of high strength steel10.1016/j.ijfatigue.2016.04.016 ↗
45. A cumulative damage model for fatigue life estimation of high-strength steels in high-cycle and very-high-cycle fatigue regimes10.1111/j.1460-2695.2011.01658.x ↗
46. Factors affecting ultralong life fatigue and design method for components
47. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
48. Characteristic S-N property of high carbon chromium bearing steel under axial loading in long life fatigue10.1299/kikaia.67.1980 ↗
49. Dominant factors for very-high-cycle fatigue of high-strength steels and a new design method for components10.1111/ffe.12331 ↗
50. Ultra-long cycle fatigue of high-strength carbon steels part II: estimation of fatigue limit for failure from internal inclusions10.1016/S0921-5093(03)00136-9 ↗
51. On the formation mechanisms of fine granular area (FGA) on the fracture surface for high strength steels in the VHCF regime10.1016/j.ijfatigue.2015.08.021 ↗
52. The influence of various types of small defects on the fatigue limit of precipitation-hardened 17–4PH stainless steel10.1016/j.tafmec.2016.10.003 ↗
53. The role of crack origin size and early stage crack growth on high cycle fatigue of powder metallurgy Ti-6Al-4V alloy10.1016/j.ijfatigue.2017.05.004 ↗