Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg
Source abstract
Abstract
Abstract The fatigue property of selective laser melting AlSi10Mg samples with different heat treatments was investigated. The samples were tested in the state of as-built condition, stress relief treatment, solution treatment and solution + artificial aging treatment. It is found that the as-built sample displays the highest fatigue property, and the solution treatment samples exhibit the lowest fatigue property. Heat treatment reduces the fatigue property. The fatigue cracks originate from the surface or subsurface of all the samples, surface or subsurface pores have quite important effect on fatigue property. It is found that the fatigue property is closely related to the yield strength other than ultimate tensile strength or elongation. The change in fatigue property and static mechanical properties is mainly due to the microstructural transformation. Heat treatment changes the size and morphology of Si, which leads to a decrease in fatigue property.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts10.1108/13552540710776142 ↗
2. Rapid manufacturing of metal components by laser forming10.1016/j.ijmachtools.2005.09.005 ↗
3. On the role of atmospheric oxygen into mechanical properties and fracture behavior of selective laser melted AlCu5MnCdVA
4. Mechanical properties of AlSi10Mg produced by selective laser melting10.1016/j.phpro.2012.10.059 ↗
5. Study on the selective laser melting of AlSi10Mg
6. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg10.1016/j.jmatprotec.2015.02.013 ↗
7. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
8. Aboulkhair NT, Maskery I, Ashcroft I, et al. The role of powder properties on the processability of aluminium alloys in selective laser melting. Laser World of Photonics Congress 2015. Lasers in manufacturing conference; 2015.
9. Roughness modeling of AlSi10Mg parts fabricated by selective laser melting10.1016/j.jmatprotec.2016.11.013 ↗
10. Investigation on selective laser melting AlSi10Mg cellular lattice strut: molten pool morphology, surface roughness and dimensional accuracy10.3390/ma11030392 ↗
11. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
12. On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties10.1016/j.jmatprotec.2015.11.016 ↗
13. Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis
14. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment10.1016/j.msea.2016.04.092 ↗
15. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2016.03.088 ↗
16. Selective laser melting of AlSi10Mg: effects of scan direction, part placement and inert gas flow velocity on tensile strength10.1016/j.jmatprotec.2016.10.015 ↗
17. Selective laser melting of AlSi10Mg: influence of post-processing on the microstructural and tensile properties development10.1016/j.matdes.2016.05.066 ↗
18. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments10.1016/j.msea.2017.08.029 ↗
19. Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting10.1016/j.ijfatigue.2016.06.002 ↗
20. Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM)10.1016/j.matchar.2017.06.029 ↗
21. Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): microstructure, high cycle fatigue, and fracture behavior10.1016/j.matdes.2011.07.067 ↗
22. Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality10.1016/j.matdes.2016.05.041 ↗
23. Fatigue of AlSi10Mg samples fabricated by additive manufacturing selective laser melting (AM-SLM)10.1016/j.msea.2017.08.027 ↗
24. On the effect of shot-peening on fatigue resistance of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting (AM-SLM)
25. Fatigue properties of AlSi10Mg obtained by additive manufacturing: defect-based modelling and prediction of fatigue strength10.1016/j.engfracmech.2017.11.002 ↗
26. Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting10.1016/j.jmatprotec.2015.01.025 ↗
27. Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy10.1016/j.matdes.2016.08.036 ↗
28. Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy10.1016/j.ijfatigue.2016.06.003 ↗
29. On the fatigue performance of laser hybrid welded high Zn 7000 alloys for next generation railway components10.1016/j.ijfatigue.2016.05.017 ↗
30. Porosity induced fatigue damage of laser welded 7075–T6 joints investigated via synchrotron X-ray microtomography10.1179/1362171814Y.0000000249 ↗
31. Corner fatigue cracking behavior of hybrid laser AA7020 welds by synchrotron X-ray computed microtomography10.1016/j.msea.2015.11.011 ↗
32. Summary of stress-intensity factors
33. Experimental and finite element analyses on stress intensity factors of an elliptical surface crack in a circular shaft under tension and bending10.1023/B:FRAC.0000047784.23236.7d ↗
34. Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy10.1016/j.scriptamat.2017.02.036 ↗
35. Selective laser melting of Al7050 powder: melting mode transition and comparison of the characteristics between the keyhole and conduction mode10.1016/j.matdes.2017.09.014 ↗
36. Strength and strain hardening of a selective laser melted AlSi10Mg alloy10.1016/j.scriptamat.2017.07.025 ↗
37. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting10.1016/j.actamat.2016.06.009 ↗
38. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment10.1016/j.msea.2013.10.023 ↗