High resolution digital image correlation measurements of strain accumulation in fatigue crack growth
Source abstract
Abstract
Abstract Microstructure plays a key role in fatigue crack initiation and growth. Consequently, measurements of strain at the microstructural level are crucial to understanding fatigue crack behavior. The few studies that provide such measurements have relatively limited resolution or areas of observation. This paper provides quantitative, full-field measurements of plastic strain near a growing fatigue crack in Hastelloy X, a nickel-based superalloy. Unprecedented spatial resolution for the area covered was obtained through a novel experimental technique based on digital image correlation (DIC). These high resolution strain measurements were linked to electron backscatter diffraction (EBSD) measurements of grain structure (both grain shape and orientation). Accumulated plastic strain fields associated with fatigue crack growth exhibited inhomogeneities at two length scales. At the macroscale, the plastic wake contained high strain regions in the form of asymmetric lobes associated with past crack tip plastic zones. At high magnification, high resolution DIC measurements revealed inhomogeneities at, and below, the grain scale. Effective strain not only varied from grain to grain, but also within individual grains. Furthermore, strain localizations were observed in slip bands within grains and on twin and grain boundaries. A better understanding of these multiscale heterogeneities could help explain variations in fatigue crack growth rate and crack path and could improve the understanding of fatigue crack closure and fracture in ductile metals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Critical analysis of crack propagation laws10.1115/1.3656900 ↗
2. On fatigue crack propagation in FCC metals10.1016/0001-6160(63)90010-5 ↗
3. Fatigue crack closure under cyclic tension
4. The significance of fatigue crack closure, damage tolerance in aircraft structures
5. Fatigue damage and crack growth in aluminum alloys10.1016/0001-6160(63)90008-7 ↗
6. Experimental quantification of the plastic blunting process for stage II fatigue crack growth in one-phase metallic materials10.1016/j.ijplas.2007.03.009 ↗
7. Low cycle fatigue, fatigue crack propagation and substructures in a series of polycrystalline Cu–Al alloys10.1007/BF02642311 ↗
8. Cyclic stress-strain response of fcc metals and alloys 2. Dislocation structures and mechanisms10.1016/0001-6160(67)90138-1 ↗
9. Influence of metallurgical structure on the mechanisms of fatigue crack propagation10.1520/STP47230S ↗
10. Peralta · 2008
11. New experiments concerning slip processes at propagating fatigue cracks 110.1016/0001-6160(74)90071-6 ↗
12. Initial stages of damage in high stress fatigue in some pure metals10.1080/14786436308209084 ↗
13. Mechanics of fatigue crack propagation by crack-tip plastic blunting10.1016/0013-7944(84)90163-2 ↗
14. Low endurance fatigue in metals and polymers, Part 3: Mechanisms of failure10.1007/BF00550216 ↗
15. Formation of fatigue striations10.1007/BF00185199 ↗
16. On fatigue crack growth in ductile materials by crack-tip blunting10.1016/j.jmps.2004.02.007 ↗
17. Simulation of fatigue crack propagation in ductile metals by blunting and re-sharpening10.1007/s10704-005-6024-y ↗
18. Geometry of slip processes at a propagating fatigue crack 210.1016/0001-6160(74)90072-8 ↗
19. Experimental and theoretical strain distributions for stationary and growing cracks10.1016/0022-5096(90)90022-V ↗
20. In situ SEM experiments concerning the mechanism of ductile crack growth10.1016/0001-6160(79)90126-3 ↗
21. Fatigue fracture at bicrystal interfaces: experiment and theory10.1016/S1359-6454(97)00430-8 ↗
22. An experimental study on grain deformation and interactions in an Al–0.5%Mg multicrystal10.1016/S0749-6419(03)00100-1 ↗
23. Walley J, Wheeler R, Uchic MD, Mills MJ. Local strain accommodation in polycrystalline Ni-base superalloys. In: SEM annual conference and exposition on experimental and applied mechanics 2010, June 7, 2010–June 10, 2010, Society for Experimental Mechanics, Indianapolis, IN, United states, 2010, p. 184–91.
24. Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal10.1016/j.ijplas.2008.01.002 ↗
25. Relating inhomogeneous deformation to local texture in zirconium through grain-scale digital image correlation strain mapping experiments10.1016/j.ijsolstr.2011.09.001 ↗
26. Coupling between measured kinematic fields and multicrystal SMA finite element calculations10.1016/j.mechmat.2009.09.003 ↗
27. Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials10.1016/j.ijplas.2007.01.009 ↗
28. Surface observation and measurement techniques to study the fatigue damage micromechanisms in a duplex stainless steel10.1016/j.ijfatigue.2008.11.003 ↗
29. Distributions of stretch and rotation in polycrystalline OFHC Cu10.1115/1.1479354 ↗
30. Multiscale strain measurements of plastically deforming polycrystalline titanium: role of deformation heterogeneities10.1016/j.ijplas.2009.04.006 ↗
31. An experimental methodology to relate local strain to microstructural texture10.1063/1.3474902 ↗
32. Microstructure-dependent local strain behavior in polycrystals through in-situ scanning electron microscope tensile experiments10.1007/s11661-009-9938-6 ↗
33. Abuzaid W, Sangid MD, Carroll JD, Sehitoglu H, Lambros J. Slip transfer and plastic strain accumulation across grain boundaries in hastelloy X. J Mech Phys Solids 2012; in press.10.1016/j.jmps.2012.02.001 ↗
34. Estimation of stress intensity factor by digital image correlation10.1016/0013-7944(87)90124-X ↗
35. An experimental study of mixed mode crack initiation and growth in functionally graded materials10.1007/s11340-006-6416-6 ↗
36. Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks10.1088/0022-3727/42/21/214004 ↗
37. Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images10.1016/j.actamat.2009.05.005 ↗
38. Experimental and numerical investigation of fracture in a cast aluminium alloy10.1016/j.ijsolstr.2010.08.013 ↗
39. Influence of microstructure on fatigue crack growth resistance in TiAl alloys by using white light image correlation method
40. 3D X-ray microtomography volume correlation to study fatigue crack growth10.1002/adem.201000235 ↗
41. Superior fatigue crack growth resistance, irreversibility, and fatigue crack growth-microstructure relationship of nanocrystalline alloys10.1016/j.actamat.2011.07.058 ↗
42. Fatigue crack tip plastic strains by the stereoimaging technique10.1007/BF02321294 ↗
43. Abuzaid W, Oral A, Sehitoglu H, Lambros J, Maier HJ. Fatigue crack initiation in Hastelloy X – the role of boundaries. Int J Fatigue, submitted for publication.
44. Strain and stress fields near the blunted tip of a crack under mixed mode loading and the implications for fracture10.1016/0167-6636(86)90038-4 ↗
45. Mechanics of crack tip deformation and extension by fatigue10.1520/STP47234S ↗
46. Accurate measurement of 3-dimensional deformations in deformable and rigid bodies using computer vision10.1007/BF02322488 ↗
47. Tomlinson RA, Du Y, Patterson EA. Understanding crack tip plasticity-a multi-experimental approach. In: 8th International conference on advances in experimental mechanics: integrating simulation and experimentation for validation, September 7, 2011–September 9, 2011, Trans Tech Publications, Edinburgh, United kingdom, 2011. p. 153–8.10.4028/www.scientific.net/AMM.70.153 ↗
48. Image processing and analysis of 3-D microscopy data10.1007/s11837-011-0046-x ↗
49. Three-dimensional analysis of grain topology and interface curvature in a beta-titanium alloy10.1016/j.actamat.2010.06.030 ↗
50. Mesoscale strain measurement in deformed crystals: a comparison of X-ray microdiffraction with electron backscatter diffraction10.1080/14786430903397297 ↗
51. A framework for automated analysis and simulation of 3D polycrystalline micro structures. Part 1: Statistical characterization10.1016/j.actamat.2007.11.041 ↗
52. 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography10.1016/j.actamat.2010.09.063 ↗
53. Digital volume correlation: three-dimensional strain mapping using X-ray tomography10.1007/BF02323555 ↗
54. Towards high performance digital volume correlation10.1007/s11340-010-9445-0 ↗
55. The evolution of crack-tip stresses during a fatigue overload event10.1016/j.actamat.2010.03.013 ↗