3D particle tracking velocimetry for the determination of temporally resolved particle trajectories within laser powder bed fusion of metals
Source abstract
Abstract
Abstract Within this work, we present a system for the measurement of the three-dimensional (3D) trajectories of spatters and entrained particles during laser powder bed fusion (L-PBF) of metals. It is comprised of two ultrahigh-speed cameras and a reconstruction task specific processing reconstruction algorithm. The system enables an automated determination of 3D measures from the trajectories of a large number of tracked particles. Ambiguity evolving from an underdetermined geometrical situation induced by a two-camera setup is resolved within the tracking using a priori knowledge of L-PBF of metals. All processing steps were optimized to run on a graphics processing unit to allow the processing of large amounts of data within an appropriate time frame. The overall approach was validated by a comparison of the measurement results to synthetic images with a known 3D ground truth.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Advanced X-ray and CT Imaging
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. 3D printing and additive manufacturing state of the industry: annual worldwide progress report
2. Aerospace applications of laser additive manufacturing10.1016/B978-0-08-100433-3.00013-0 ↗
3. Review of mechanical properties of Ti-6Al-4V made by laser-based additive manufacturing using powder feedstock10.1007/s11837-015-1759-z ↗
4. Scaling laws for the additive manufacturing10.1016/j.jmatprotec.2018.02.034 ↗
5. Denudation of metal powder layers in laser powder bed fusion processes10.1016/j.actamat.2016.05.017 ↗
6. Formation processes for large ejecta and interactions with melt pool formation in powder bed fusion additive manufacturing10.1038/s41598-019-41415-7 ↗
7. Fluid and particle dynamics in laser powder bed fusion10.1016/j.actamat.2017.09.051 ↗
8. Reducing lack of fusion during selective laser melting of CoCrMo alloy: effect of laser power on geometrical features of tracks10.1016/j.matdes.2016.09.086 ↗
9. Dynamic mechanical behavior of additively manufactured Ti6Al4V with controlled voids10.1115/1.4029745 ↗
10. A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V10.1007/s11661-015-2882-8 ↗
11. Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing10.1016/j.jmapro.2018.09.011 ↗
12. Evaporation-induced gas-phase flows at selective laser melting10.1007/s00339-017-1532-y ↗
13. Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing10.1038/s41598-017-04237-z ↗
14. Particle tracking velocimetry for indoor airflow field: a review10.1016/j.buildenv.2015.01.014 ↗
15. Particle tracking velocimetry in three-dimensional flows10.1007/BF00190953 ↗
16. Über die Begründung des Gesetzes der schwarzen Strahlung10.1002/andp.19123420403 ↗
17. Complexity analysis for the determination of image correspondences in dense spatial target fields
18. Multiscale vessel enhancement filtering10.1007/BFb0056195 ↗
19. A flexible new technique for camera calibration10.1109/34.888718 ↗
20. A four-step camera calibration procedure with implicit image correction10.1109/CVPR.1997.609468 ↗
21. Multi-view geometry for camera networks10.1016/b978-0-12-374633-7.00003-3 ↗
22. A new approach to linear filtering and prediction problems10.1115/1.3662552 ↗