Theoretical and experimental investigation of chemical mechanical polishing of W–Ni–Fe alloy
Source abstract
Abstract
Abstract Fine finishing of tungsten alloy is required to improve the surface quality of molds and precision instruments. Nevertheless, it is difficult to obtain high-quality surfaces as a result of grain boundary steps attributed to differences in properties of two-phase microstructures. This paper presents a theoretical and experimental investigation on chemical mechanical polishing of W–Ni–Fe alloy. The mechanism of the boundary step generation is illustrated and a model of grain boundary step formation is proposed. The mechanism reveals the effects of mechanical and chemical actions in both surface roughness and material removal. The model was verified by the experiments and the results show that appropriately balancing the mechanical and chemical effects restrains the generation of boundary steps and leads to a fine surface quality with a high removal rate by citric acid-based slurry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Effect of solution treatment temperature and cooling rate on the mechanical properties of tungsten heavy alloy10.1016/j.msea.2017.01.113 ↗
2. Modeling of the heavy tungsten alloy IT18010.1016/j.ijrmhm.2015.01.018 ↗
3. Computer numerical simulation of mechanical properties of tungsten heavy alloys
4. Deformation behaviour of a newer tungsten heavy alloy10.1016/j.msea.2011.04.067 ↗
5. Recent progress in processing of tungsten heavy alloys10.1155/2014/764306 ↗
6. Tungsten heavy alloy for defence applications10.1080/10667857.2004.11753087 ↗
7. Research on the preparation and shielding properties of W–Ni–Fe alloy material by liquid phase sintering10.1080/00325899.2017.1376791 ↗
8. Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetrators10.1016/S0921-5093(98)00997-6 ↗
9. Effect of the militarily-relevant heavy metals, depleted uranium and heavy metal tungsten-alloy on gene expression in human liver carcinoma cells (HepG2)10.1023/B:MCBI.0000007280.72510.96 ↗
10. The effect of shock-wave profile on dynamic brittle failure10.1063/1.4794002 ↗
11. Microstructure and mechanical properties of mechanically alloyed and solid-state sintered tungsten heavy alloys10.1016/S0921-5093(00)00968-0 ↗
12. Results on the use of tungsten heavy alloys in the divertor of ASDEX Upgrade10.1016/j.jnucmat.2018.05.066 ↗
13. Fatigue properties and characterization of tungsten heavy alloys IT180 & D17610.1016/j.ijrmhm.2013.04.010 ↗
14. Machining of tungsten heavy alloy under cryogenic environment10.1016/j.mspro.2014.07.037 ↗
15. Elliptical vibration cutting of tungsten alloy molds for optical glass parts10.1016/j.cirp.2007.05.032 ↗
16. 1,2,4-Triazole as a corrosion inhibitor in copper chemical mechanical polishing10.1016/j.tsf.2013.12.047 ↗
17. A study of chemical products formed on sapphire (0001) during chemical–mechanical polishing10.1016/j.surfcoat.2015.02.053 ↗
18. Ultrasonic flexural vibration assisted chemical mechanical polishing for sapphire substrate10.1016/j.apsusc.2010.01.053 ↗
19. Ultraprecision CMP for sapphire, GaN, and SiC for advanced optoelectronics materials10.1016/j.cap.2012.02.016 ↗
20. Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes10.1016/j.precisioneng.2012.12.006 ↗
21. Effects of abrasive size distribution in chemical mechanical planarization: modeling and verification10.1109/TSM.2003.815199 ↗
22. A material removal rate model considering interfacial micro-contact wear behavior for chemical mechanical polishing10.1115/1.1828068 ↗
23. A chemical mechanical polishing model incorporating both the chemical and mechanical effects10.1016/j.tsf.2003.09.060 ↗
24. A model of copper CMP10.1149/1.1861175 ↗
25. A mathematical model for chemical–mechanical polishing based on formation and removal of weakly bonded molecular species10.1016/S0043-1648(03)00015-2 ↗
26. A chemical mechanical planarization model for aluminum gate structures10.1016/j.mee.2014.09.023 ↗
27. Modeling effect of chemical–mechanical synergy on material removal at molecular scale in chemical mechanical polishing10.1016/j.wear.2008.01.001 ↗
28. Modeling the chemical–mechanical synergy during copper CMP10.1149/1.3526320 ↗
29. Nanometer-scale Characteristics of polycrystalline YAG ceramic polishing10.1016/j.cirp.2018.04.090 ↗
30. Superfinishing of polycrystalline YAG ceramic by nanodiamond slurry10.1016/j.cirp.2019.04.062 ↗
31. Microstructure characterization of W-Ni-Fe heavy alloys with optimized metallographic preparation method10.1016/j.ijrmhm.2019.01.011 ↗
32. Popov · 2010
33. A micro-contact and wear model for chemical–mechanical polishing of silicon wafers10.1016/S0043-1648(01)00871-7 ↗
34. Nonlinear compression behavior of the grooved polishing pad: a model and its validation10.1149/2.0321704jss ↗
35. Contact of nominally flat surfaces
36. Johnson · 1985
37. Impact of abrasive particles on the material removal rate in the chemical-mechanical polishing process: a micro-contact perspective10.1149/1.1637561 ↗
38. Suppression of grain boundary steps in chemical mechanical polishing of W–Ni–Fe alloy by a citric acid-based slurry10.1016/j.mfglet.2020.07.004 ↗
39. Nitric acid-based slurry with citric acid as an inhibitor for copper chemical mechanical polishing10.1016/S0254-0584(99)00138-8 ↗