journal article·2016-08

Comparative study of mechanical properties and damage kinetics of two- and three-dimensional woven composites under high-strain rate dynamic compressive loading

Jamal Arbaoui, Mostapha Tarfaoui, Charbel Bouery, Aboulghit El Malki Alaoui

Publisher page

Abstract

The in-plane compressive behavior of two- and three-dimensional woven composite was investigated at high strain rates. The Split Hopkinson Pressure Bar is employed to test the high strain rate dynamic mechanical properties of E-glass vinylester composite material. For three-dimensional woven composite, two configurations were tested: compression responses along the stitched direction and orthogonal to the stitched direction. Dynamic compression properties for two- and three-dimensional are determined and compared. Experimental results show that the strain rate has a significant effect on the two- and three-dimensional woven composite response. It is observed that the three-dimensional woven composite has higher compression strength and dynamic modulus than the two-dimensional composite at high strain rate. For this study, a high-speed camera was used to determine the damage kinetics under dynamic load. The two-dimensional woven composite is mainly damaged in a mode of matrix cracks and severe delamination, while the mode for three-dimensional woven composite is mainly cracking of matrix and delamination for in-plane along to the stitched direction and shear banding failure for in-plane orthogonal to the stitched direction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

MSN/LBMS/DFMS, ENSTA-Bretagne, Brest, France

Université Privée de Marrakech, Marrakech, Morocco

References (36)

Show source-provided references
1. Arbaoui J · Journal of Composite Materials · 2015
2. 10.1016/j.ijimpeng.2015.06.02610.1016/j.ijimpeng.2015.06.026 ↗
3. 10.1016/j.carbon.2013.04.07310.1016/j.carbon.2013.04.073 ↗
4. 10.1016/0266-3538(92)90002-K10.1016/0266-3538(92)90002-K ↗
5. 10.1016/0010-4361(91)90671-310.1016/0010-4361(91)90671-3 ↗
6. Frey T, Vinson J and Hall I (1991) High strain rate effects on mechanical properties of glass/polyester and carbon/aluminum composite materials. In: 32nd structures, structural dynamics, and materials conference , AIAA-91-0930-CP.10.2514/6.1991-930 ↗
7. 10.1177/00219980177266229910.1177/002199801772662299 ↗
8. 10.1016/j.compstruct.2015.02.06110.1016/j.compstruct.2015.02.061 ↗
9. Hamitouche L (2008) Endommagement et rupture des assemblage en T de structures composites pour des applications navales . PhD Thesis, Université de Bretagne occidentale, Brest.
10. 10.1016/0010-4361(93)90042-710.1016/0010-4361(93)90042-7 ↗
11. 10.1177/00219980177266235210.1177/002199801772662352 ↗
12. 10.1016/S0263-8223(02)00247-710.1016/S0263-8223(02)00247-7 ↗
13. 10.1016/S0263-8223(01)00031-910.1016/S0263-8223(01)00031-9 ↗
14. 10.1016/j.compscitech.2008.12.01410.1016/j.compscitech.2008.12.014 ↗
15. Huang SL, Richey RJ and Deska EW (1970). Cross reinforcement in a GFRP laminate. In: Paper presented at ASME, winter annual meeting , San Francisco, CA, 1–15 December.
16. 10.1016/j.compscitech.2004.09.02710.1016/j.compscitech.2004.09.027 ↗
17. 10.1016/j.compscitech.2007.10.04710.1016/j.compscitech.2007.10.047 ↗
18. 10.1016/0263-8223(93)90190-210.1016/0263-8223(93)90190-2 ↗
19. Ko F · SAMPE J · 1989 · 22 · 26
20. 10.1016/j.mspro.2014.07.12010.1016/j.mspro.2014.07.120 ↗
21. Liu F · Fiber Reinforced Plastics Composite · 2005 · 2 · 13
22. 10.1016/j.compositesa.2007.08.01610.1016/j.compositesa.2007.08.016 ↗
23. 10.1016/j.compscitech.2007.04.01710.1016/j.compscitech.2007.04.017 ↗
24. 10.1016/S1359-835X(99)00034-210.1016/S1359-835X(99)00034-2 ↗
25. Newill JF and Vinson JR (1993) Some high strain rate effects of composite materials. In: Proceedings of the ninth international conference on composite materials , ICCM-9, Madrid, Spain, 12–16 July.
26. 10.1016/j.ijsolstr.2005.05.00510.1016/j.ijsolstr.2005.05.005 ↗
27. 10.4028/www.scientific.net/AMM.174-177.152810.4028/www.scientific.net/AMM.174-177.1528 ↗
28. 10.1177/00219983710050030710.1177/002199837100500307 ↗
29. 10.1016/j.polymertesting.2005.01.00510.1016/j.polymertesting.2005.01.005 ↗
30. Tarfaoui M · Advanced Composite Materials · 2011 · 16 · 359
31. 10.1016/j.compscitech.2007.06.01410.1016/j.compscitech.2007.06.014 ↗
32. 10.1177/002199830809833610.1177/0021998308098336 ↗
33. 10.1016/0263-8223(95)00116-610.1016/0263-8223(95)00116-6 ↗
34. Tong L · 2002
35. 10.2514/2.82010.2514/2.820 ↗
36. Yokoyama T and Nakai K (2009) Impact compressive failure of a unidirectional carbon/epoxy laminated composite in three principal material directions. In: Proceedings of DYMAT 2009 conference , vol. 1/2, Brussels, September 2009.10.1051/dymat/2009091 ↗