Post-fire Mechanical Behaviour of Concrete Reinforced with Phragmites Australis Fibres
Source abstract
Abstract
Abstract The use of natural fibres as concrete reinforcement has gained increasing attention due to their environmental benefits, renewability, and cost-effectiveness. This study investigates the post-fire mechanical behaviour of concrete reinforced with Phragmites australis fibres (PAF), a locally available and sustainable material. Concrete mixes containing 0%, 0.5%, 1%, 1.5%, and 2% fibre volume fractions were exposed to temperatures up to 600 °C for 2 h to simulate fire conditions. The effects of fibre content and temperature were assessed through measurements of slump, compressive strength, splitting tensile strength, flexural strength, and ultrasonic pulse velocity (UPV). Results showed that PAF-reinforced concrete retained considerable strength and integrity up to 400 °C, with a pronounced reduction observed at 600 °C due to fibre degradation and microcrack propagation. Regression models developed from the experimental data demonstrated strong correlations between fibre dosage, temperature, and residual mechanical properties. The analysis identified an optimal fibre content between 0.5% and 1%, which provided the best balance between thermal stability and mechanical performance. These findings highlight the potential of Phragmites australis fibres as an effective and sustainable reinforcement for improving the fire resistance of concrete structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fire effects on concrete materials · Natural Fiber Reinforced Composites · Engineering and Material Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Abdalla, J. A., Hawileh, R. A., Bahurudeen, A., Jyothsna, G., Sofi, A., Shanmugam, V., & Thomas, B. S. (2023). A comprehensive review on the use of natural fibers in cement/geopolymer concrete: A step towards sustainability. Case Studies in Construction Materials, 19, Article e02244.10.1016/j.cscm.2023.e02244 ↗
2. Abdallah, S., Salih, B. H., Mohammed, A. S., Fan, M., Hilal, A. A., Collins, P. E., & Sameer, J. O. (2025). Effect of alkali treatment on mechanical properties of concrete reinforced with phragmites australis fibres. Asian Journal of Civil Engineering, , 1–14. https://doi.org/10.1007/s42107-025-01556-910.1007/s42107-025-01556-9 ↗
3. Abdallah, S., Fan, M., & Cashell, K. A. (2017). Pull-out behaviour of straight and hooked-end steel fibres under elevated temperatures. Cement and Concrete Research, 95, 132–140. https://doi.org/10.1016/j.cemconres.2017.02.01010.1016/j.cemconres.2017.02.010 ↗
4. Alsaif, A., & Abbas, Y. M. (2025). Thermal stability and mechanical behavior of cementitious composites reinforced with industrial and recycled tire steel fibers under elevated temperature conditions. Construction and Building Materials, 481, Article 141580. https://doi.org/10.1016/j.conbuildmat.2025.14158010.1016/j.conbuildmat.2025.141580 ↗
5. Altunişik, A. C., Akbulut, Y. E., Adanur, S., Günaydin, M., Mostofi, S., & Mosallam, A. (2023). Experimental study of the effect of different insulation schemes on fire performance of FRP strengthened concrete: FIRECOAT and REALROCK. International Journal of Concrete Structures and Materials, 17(1), 55.10.1186/s40069-023-00604-5 ↗
6. Aluko, O. G., Yatim, J. M., Kadir, M. A. A., & Yahya, K. (2020). A review of properties of bio-fibrous concrete exposed to elevated temperatures. Construction and Building Materials, 260, Article 119671. https://doi.org/10.1016/j.conbuildmat.2020.11967110.1016/j.conbuildmat.2020.119671 ↗
7. Amer, I., Kohail, M., El-Feky, M. S., Rashad, A., & Khalaf, M. A. (2023). Realistic evaluation of reinforcement bond strength in alkali-activated slag concrete exposed to elevated temperature. International Journal of Concrete Structures and Materials, 17(1), 36.10.1186/s40069-023-00596-2 ↗
8. American Society for Testing and Materials. Committee C-9 on Concrete and Concrete Aggregates. (2011). Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM international.
9. Amin, M., Tayeh, B. A., & agwa, Is. (2020). Investigating the mechanical and microstructure properties of fibre-reinforced lightweight concrete under elevated temperatures. Case Studies in Construction Materials, 13, Article e00459. https://doi.org/10.1016/j.cscm.2020.e0045910.1016/j.cscm.2020.e00459 ↗
10. Chen, L., Chen, Z., Xie, Z., Wei, L., Hua, J., Huang, L., & Yap, P. (2023). Recent developments on natural fiber concrete: A review of properties, sustainability, applications, barriers, and opportunities. Developments in the Built Environment, 16, Article 100255. https://doi.org/10.1016/j.dibe.2023.10025510.1016/j.dibe.2023.100255 ↗
11. Chun, Y., Ryu, E., Lee, Y., Kim, H., & Shin, Y. (2022). Experimental and analytical studies for the size effect on the axial strength of high-strength concrete walls with various fire-damaged areas. International Journal of Concrete Structures and Materials, 16(1), 32.10.1186/s40069-022-00519-7 ↗
12. Dash, D., Mund, N. K., Upadhyay, D., Mishra, P., Dash, S. K., & Nayak, N. R. (2023). Evaluation of alkali and cellulose solvent pretreatments for fermentable sugar production from the biomass of Phragmites karka (Retz.) Trin. ex Steud.: A high biomass producing grass. Biomass Conversion and Biorefinery, 13(9), 7725–7736.10.1007/s13399-021-01730-4 ↗
13. Durant, D., Farruggia, A., & Tricheur, A. (2020). Utilization of common reed (Phragmites australis) as bedding for housed suckler cows: Practical and economic aspects for farmers. Resources, 9(12), 140.10.3390/resources9120140 ↗
14. Elfaleh, I., Abbassi, F., Habibi, M., Ahmad, F., Guedri, M., Nasri, M., & Garnier, C. (2023). A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials. Results in Engineering, 19, Article 101271. https://doi.org/10.1016/j.rineng.2023.10127110.1016/j.rineng.2023.101271 ↗
15. BS EN 12390-5. (2009). Testing hardened concrete. Flexural strength of test specimens. British Standard Institution
16. En, B. S. (2009). 12390-3, Testing hardened concrete-Part 3: Compressive strength of test specimens. British Standards Institution, p. 22
17. Eng, L., & Kim, C. (2025). Finite-element analysis of flexural strengthening performance of fire-damaged RC beams. International Journal of Concrete Structures and Materials, 19(1), 47.10.1186/s40069-025-00789-x ↗
18. Gencel, O., Nodehi, M., Yavuz Bayraktar, O., Kaplan, G., Benli, A., Gholampour, A., & Ozbakkaloglu, T. (2022). Basalt fiber-reinforced foam concrete containing silica fume: An experimental study. Construction and Building Materials, 326, Article 126861. https://doi.org/10.1016/j.conbuildmat.2022.12686110.1016/j.conbuildmat.2022.126861 ↗
19. Han, H., Wang, Z., & Hadi Mosleh, M. (2024). High performance basalt-fibre modified cement for elevated temperature environments. Construction and Building Materials, 448, Article 138186. https://doi.org/10.1016/j.conbuildmat.2024.13818610.1016/j.conbuildmat.2024.138186 ↗
20. Hung, C., Yulianti, E., & Agrawal, S. (2024). Microstructures, durability, and mechanical behavior of hybrid steel and PP fiber reinforced UHPC at elevated temperatures. Construction and Building Materials, 447, Article 138208. https://doi.org/10.1016/j.conbuildmat.2024.13820810.1016/j.conbuildmat.2024.138208 ↗
21. Islam, M. S., & Ahmed, S. J. (2018). Influence of jute fiber on concrete properties. Construction and Building Materials, 189, 768–776. https://doi.org/10.1016/j.conbuildmat.2018.09.04810.1016/j.conbuildmat.2018.09.048 ↗
22. Juradin, S., Vranješ, L. K., Jozić, D., & Boko, I. (2021). Post-fire mechanical properties of concrete reinforced with spanish broom fibers. Journal of Composites Science, 5(10), 265.10.3390/jcs5100265 ↗
23. Khatib, J. M., ElKhatib, L. W., Elkordi, A., & Sonebi, M. (2023). Length change of mortar containing Phragmites Australis Ash (PAA). Materials Today: Proceedings,10.1016/j.matpr.2023.07.105 ↗
24. Khatib, J., ElKhatib, L., Assaad, J., & El Kordi, A. (2023b). Properties of mortar containing Phragmites australis Ash. Journal of Engineering, Design and Technology. https://doi.org/10.1108/JEDT-12-2022-061010.1108/JEDT-12-2022-0610 ↗
25. Khatib, J., Ramadan, R., Ghanem, H., & Elkordi, A. (2024). Effect of adding Phragmites-Australis fiber on the mechanical properties and volume stability of mortar. Fibers, 12(2), 14.10.3390/fib12020014 ↗
26. Krishna, A., Kaliyaperumal, S. R. M., & Kathirvel, P. (2022). Compressive strength and impact resistance of hybrid fiber reinforced concrete exposed to elevated temperatures. Structural Concrete, 23(3), 1611–1624.10.1002/suco.202100566 ↗
27. Lee, Y., Chun, Y., Kodur, V., & Kim, H. S. (2025). Effect of supplementary cementitious materials on post-fire performance of concrete columns. International Journal of Concrete Structures and Materials, 19(1), 49.10.1186/s40069-025-00780-6 ↗
28. Liang, K., Chen, L., & Su, R. K. L. (2025). Bond behavior of basalt fiber-reinforced polymer bars (BFRP) embedded in ultra-high-performance concrete after elevated temperature exposure. Construction and Building Materials, 481, Article 141531. https://doi.org/10.1016/j.conbuildmat.2025.14153110.1016/j.conbuildmat.2025.141531 ↗
29. Mathew, L., & Paul, M. M. (2017). Mechanical properties of pineapple fibre reinforced concrete subjected to high temperature. GRD J.—Glob.res.dev.j.eng, 2, 200–205.
30. Mihoub, I., Khelifa, M., & Mezhoud, S. (2020). Impact of elevated temperature on the properties of concretes reinforced with Alfa fiber. Civil and Environmental Engineering Reports, 30(3), 161–185.10.2478/ceer-2020-0038 ↗
31. Mohammed, A. D. A. A., Ronghui, W., & Huseien, G. F. (2024). Mechanical properties of natural jute fiber-reinforced geopolymer concrete: Effects of various lengths and volume fractions. Journal of Composites Science, 8(11), 450.10.3390/jcs8110450 ↗
32. Netinger Grubeša, I., Marković, B., Gojević, A., & Brdarić, J. (2018). Effect of hemp fibers on fire resistance of concrete. Construction and Building Materials, 184, 473–484. https://doi.org/10.1016/j.conbuildmat.2018.07.01410.1016/j.conbuildmat.2018.07.014 ↗
33. Noumowe, A. (2005). Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200 °C. Cement and Concrete Research, 35(11), 2192–2198. https://doi.org/10.1016/j.cemconres.2005.03.00710.1016/j.cemconres.2005.03.007 ↗
34. Othuman Mydin, M. A., Zamzani, N. M., & Ghani, A. N. A. (2019). Experimental data on compressive and flexural strengths of coir fibre reinforced foamed concrete at elevated temperatures. Data in Brief, 25, Article 104320. https://doi.org/10.1016/j.dib.2019.10432010.1016/j.dib.2019.104320 ↗
35. Ozawa, M., Kim, G., Choe, G., Yoon, M., Sato, R., & Rokugo, K. (2016). Thermal properties of jute fiber concrete at high temperature. Journal of Structural Fire Engineering, 7(3), 182–192. https://doi.org/10.1108/JSFE-09-2016-01710.1108/JSFE-09-2016-017 ↗
36. Ramadan, R., Khatib, J., Ghorbel, E., & Elkordi, A. (2023). Effect of adding Phragmites-Australis plant on the chemical shrinkage and mechanical properties of mortar. Paper presented at the International Conference on Bio-Based Building Materials, pp. 573–584.10.1007/978-3-031-33465-8_43 ↗
37. Ridha, M. M. S. (2024). Combined effect of natural fibre and steel fibre on the thermal-mechanical properties of UHPC subjected to high temperature. Cement and Concrete Research, 180, Article 107510. https://doi.org/10.1016/j.cemconres.2024.10751010.1016/j.cemconres.2024.107510 ↗
38. Shon, C., Mukashev, T., Lee, D., Zhang, D., & Kim, J. R. (2019). Can common reed fiber become an effective construction material? Physical, mechanical, and thermal properties of mortar mixture containing common reed fiber. Sustainability, 11(3), 903.10.3390/su11030903 ↗
39. Standard, A. (2018). ASTM C33/C33M–18 standard specification for concrete aggregates. West Conshohocken, PA,
40. Talaei, M., & Mostofinejad, D. (2021). Mechanical properties of fiber-reinforced concrete containing waste porcelain aggregates under elevated temperatures. Construction and Building Materials, 289, Article 122854. https://doi.org/10.1016/j.conbuildmat.2021.12285410.1016/j.conbuildmat.2021.122854 ↗
41. Thomason, J. L., & Rudeiros-Fernández, J. L. (2021). Thermal degradation behaviour of natural fibres at thermoplastic composite processing temperatures. Polymer Degradation and Stability, 188, Article 109594. https://doi.org/10.1016/j.polymdegradstab.2021.10959410.1016/j.polymdegradstab.2021.109594 ↗
42. Ye, H., Zhang, Y., Yu, Z., & Mu, J. (2018). Effects of cellulose, hemicellulose, and lignin on the morphology and mechanical properties of metakaolin-based geopolymer. Construction and Building Materials, 173, 10–16. https://doi.org/10.1016/j.conbuildmat.2018.04.02810.1016/j.conbuildmat.2018.04.028 ↗
43. Zalhaf, N. M. (2025). Application of artificial neural network for prediction of concrete–high-performance concrete interfacial bond strength after exposure to elevated temperature. International Journal of Concrete Structures and Materials, 19(1), 31.10.1186/s40069-024-00751-3 ↗
44. Zalhaf, N. M., Fayed, S., & Zakaria, M. H. (2024). Interfacial shear behavior of composite concrete substrate to high-performance concrete overly after exposure to elevated temperature. International Journal of Concrete Structures and Materials, 18(1), 19.10.1186/s40069-023-00654-9 ↗
45. Zhang, D., Tan, K. H., Dasari, A., & Weng, Y. (2020). Effect of natural fibers on thermal spalling resistance of ultra-high performance concrete. Cement and Concrete Composites, 109, Article 103512. https://doi.org/10.1016/j.cemconcomp.2020.10351210.1016/j.cemconcomp.2020.103512 ↗
46. Zhao, H., Zhou, T., Tang, J., Li, Z., Yao, C., & Gao, X. (2025). Temperature-adaptive mechanism of bamboo fibers for regulating elevated temperature performance of UHPC. Construction and Building Materials, 471, Article 140674. https://doi.org/10.1016/j.conbuildmat.2025.14067410.1016/j.conbuildmat.2025.140674 ↗