Preventing Plastic-Shrinkage Cracks in GFRP-Bar Reinforced Concrete Using Fibers
Source abstract
Abstract
Large horizontal concrete elements are susceptible to premature cracking due to environmental effects. The ASTM C1579 bottom-restraining technique cannot reliably induce controlled cracking. In this study, glass fiber-reinforced polymer (GFRP) bars were incorporated to enhance restraint and induce plastic-shrinkage cracking. Given the increasing use of GFRP bars in structures, this study investigates their influence on cracking. ASTM C1579 molds were reinforced with 13 mm and 16 mm GFRP bars, while short cellulose and polypropylene fibers were incorporated. Results indicated that samples reinforced with 16 mm GFRP bars induced more extensive cracking than those with GFRP 13 mm bars. Fibers at 0.2%, 0.25%, and 0.3% reduced cracking and enhanced mechanical strength. At 0.4%, crack mitigation was superior, though slight reductions in compressive and flexural strength were observed. Regression analysis indicated a nonlinear relationship between fiber dosage and crack reduction. Analysis of variance results revealed statistical significance (p < 0.05) for both fiber percentage and fiber type. Polypropylene outperformed cellulose fibers, although both effectively mitigated plastic-shrinkage cracking.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Properties and Behavior · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Aghaee, K., & Khayat, K. H. (2024). Use of hybrid fibers and shrinkage mitigating materials in SCC for repair applications. Construction and Building Materials, 413, Article 134903. https://doi.org/10.1016/j.conbuildmat.2024.13490310.1016/j.conbuildmat.2024.134903 ↗
2. Ahmad, J., Burduhos-Nergis, D. D., Arbili, M. M., Alogla, S. M., Majdi, A., & Deifalla, A. F. (2022). A review on failure modes and cracking behaviors of polypropylene fibers reinforced concrete. Buildings, 12(11), Article 1951. https://doi.org/10.3390/buildings1211195110.3390/buildings12111951 ↗
3. Alshammari, T. O., Guadagnini, M., & Pilakoutas, K. (2022). The effect of harsh environmental conditions on concrete plastic shrinkage cracks: Case study Saudi Arabia. Materials, 15(23), Article 8622. https://doi.org/10.3390/ma1523862210.3390/ma15238622 ↗
4. Alshammari, T. O., Pilakoutas, K., & Guadagnini, M. (2023). Performance of manufactured and recycled steel fibres in restraining concrete plastic shrinkage cracks. Materials, 16(2), Article 713. https://doi.org/10.3390/ma1602071310.3390/ma16020713 ↗
5. Amaguaña, M., Guamán, L., Gómez, N., Khorami, M., Calvo, M., & Albuja-Sánchez, J. (2023). Test method for studying the shrinkage effect under controlled environmental conditions for concrete reinforced with coconut fibres. Materials, 16(8), Article 3247. https://doi.org/10.3390/ma1608324710.3390/ma16083247 ↗
6. Arulmoly, B., Konthesingha, C., & Nanayakkara, A. (2022). Plastic settlement and hardened state assessments of manufactured sand made concrete for varying microfine levels. Structural Concrete, 24(3), 3969–3989. https://doi.org/10.1002/suco.20220045610.1002/suco.202200456 ↗
7. Bella, I., & Bella, N. (2025). Contribution to the modeling of the short-term behavior of cured concrete in hot weather. Advances in Concrete Construction, 19(3), 163–172. https://doi.org/10.12989/acc.2025.19.3.16310.12989/acc.2025.19.3.163 ↗
8. Berman, J. W., & Brown, D. L. (2010). Field monitoring and repair of a glass fiber-reinforced polymer bridge deck. Journal of Performance of Constructed Facilities, 24(3), 215–222. https://doi.org/10.1061/(ASCE)CF.1943-5509.000010210.1061/(ASCE)CF.1943-5509.0000102 ↗
9. Boshoff, W. P., & Combrinck, R. (2013). Modelling the severity of plastic shrinkage cracking in concrete. Cement and Concrete Research, 48, 34–39. https://doi.org/10.1016/j.cemconres.2013.02.00310.1016/j.cemconres.2013.02.003 ↗
10. Choi, J., & Chen, R. (2005). Design of continuously reinforced concrete pavements using glass fiber reinforced polymer rebars. U.S. Department of Transportation. https://rosap.ntl.bts.gov/view/dot/40874
11. Combrinck, R., Steyl, L., & Boshoff, W. P. (2018). Interaction between settlement and shrinkage cracking in plastic concrete. Construction and Building Materials, 185, 1–11. https://doi.org/10.1016/j.conbuildmat.2018.07.02810.1016/j.conbuildmat.2018.07.028 ↗
12. Coogler, K., Harries, K. A., Wan, B., Rizos, D. C., & Petrou, M. F. (2005). Critical evaluation of strain measurements in glass fiber-reinforced polymer bridge decks. Journal of Bridge Engineering, 10(6), 704–712. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:6(704)10.1061/(ASCE)1084-0702(2005)10:6(704) ↗
13. Dabhade, P. S., Shinde, A. R., Jadhav, P. A., More, M. M., Kadam, V. S., & Patil, A. S. (2023). An investigation of plastic shrinkage cracks in concrete containing different fibers. ResearchGate. Retrieved November 28, 2023, from https://www.researchgate.net/profile/Vidyanand_Kadam/publication/374673862
14. Egan, J., & Salmon, S. (2021). Strategies and progress in synthetic textile fiber biodegradability. SN Applied Sciences, 4(1), 1–36. https://doi.org/10.1007/s42452-021-04851-710.1007/s42452-021-04851-7 ↗
15. Fenton, C. T. (2023). Testing plastic shrinkage and cracking in concrete with an improved digital image correlation method [Master’s thesis, Stellenbosch University]. SUNScholar. https://scholar.sun.ac.za/bitstream/handle/10019.1/127224/fenton_testing_2023.pdf?sequence=1
16. Folorunsho, A. B., Kim, S., & Park, C. (2024). A review on the performance of fibers on restrained plastic shrinkage cracks. Buildings, 14(8), Article 2477. https://doi.org/10.3390/buildings1408247710.3390/buildings14082477 ↗
17. Ghourchian, S., Wyrzykowski, M., Baquerizo, L., & Lura, P. (2018). Susceptibility of Portland cement and blended cement concretes to plastic shrinkage cracking. Cement and Concrete Composites, 85, 44–55. https://doi.org/10.1016/j.cemconcomp.2017.10.00210.1016/j.cemconcomp.2017.10.002 ↗
18. Khan, M. S., Hashmi, A. F., Shariq, M., & Ibrahim, S. M. (2023). Effects of incorporating fibres on mechanical properties of fibre-reinforced concrete: A review. Materials Today: Proceedings. Advance online publication. https://doi.org/10.1016/j.matpr.2023.05.10610.1016/j.matpr.2023.05.106 ↗
19. Kipkemboi, B., & Miyazawa, S. (2025). Evaluating the influence of drying shrinkage on cracking resistance of massive self-compacting concrete with blast furnace slag using finite element method. Infrastructures, 10(1), Article 11. https://doi.org/10.3390/infrastructures1001001110.3390/infrastructures10010011 ↗
20. Kouta, N., Saliba, J., & Saiyouri, N. (2020). Effect of flax fibers on early age shrinkage and cracking of earth concrete. Construction and Building Materials, 254, Article 119315. https://doi.org/10.1016/j.conbuildmat.2020.11931510.1016/j.conbuildmat.2020.119315 ↗
21. Leemann, A., Nygaard, P., & Lura, P. (2014). Impact of admixtures on the plastic shrinkage cracking of self-compacting concrete. Cement and Concrete Composites, 46, 1–7. https://doi.org/10.1016/j.cemconcomp.2013.11.00210.1016/j.cemconcomp.2013.11.002 ↗
22. Li, W., Li, J., Ding, L., Zhu, X., Sun, R., & Chang, K. (2024). Interfacial assembled hydrogel evaporator for highly efficient thermal management and photothermal coupled water splitting reaction. Advanced Functional Materials, 34(52), Article 2411387. https://doi.org/10.1002/adfm.20241138710.1002/adfm.202411387 ↗
23. Li, Z., Chen, C., Xie, H., Yao, Y., Zhang, X., Brozena, A., Li, J., Ding, Y., Zhao, X., Hong, M., Qiao, H., Smith, L. M., Pan, X., Briber, R., Shi, S. Q., & Hu, L. (2022). Sustainable high-strength macrofibres extracted from natural bamboo. Nature Sustainability, 5(3), 235–244. https://doi.org/10.1038/s41893-021-00831-210.1038/s41893-021-00831-2 ↗
24. Liu, P., Yu, Z., Guo, F., Chen, Y., & Sun, P. (2015). Temperature response in concrete under natural environment. Construction and Building Materials, 98, 713–721. https://doi.org/10.1016/j.conbuildmat.2015.07.07010.1016/j.conbuildmat.2015.07.070 ↗
25. Manso-Morato, J., Hurtado-Alonso, N., Espinosa, A. B., Revilla-Cuesta, V., & Ortega-López, V. (2025). Dimensional stability and water transport behavior of concrete with high contents of wind-turbine blade waste. Structural Concrete. https://doi.org/10.1002/suco.7025110.1002/suco.70251 ↗
26. Markin, S., Combrinck, R., & Mechtcherine, V. (2024). Specifics of plastic shrinkage in 3D-printed concrete elements. Cement and Concrete Research, 184, Article 107512. https://doi.org/10.1016/j.cemconres.2024.10751210.1016/j.cemconres.2024.107512 ↗
27. Mazzoli, A., Monosi, S., & Plescia, E. S. (2015). Evaluation of the early-age-shrinkage of fiber reinforced concrete (FRC) using image analysis methods. Construction and Building Materials, 101, 596–601. https://doi.org/10.1016/j.conbuildmat.2015.10.09010.1016/j.conbuildmat.2015.10.090 ↗
28. Moelich, G. M., Kruger, J., & Combrinck, R. (2020). Plastic shrinkage cracking in 3D printed concrete. Composites Part B: Engineering, 200, Article 108313. https://doi.org/10.1016/j.compositesb.2020.10831310.1016/j.compositesb.2020.108313 ↗
29. Moradi, M. S., Tavana, M. H., Habibi, M. R., & Amiri, M. (2024). Effect of water to cement ratio on mechanical properties of FRC subjected to elevated temperatures: Experimental and soft computing approaches. Heliyon, 10(21), Article e39513. https://doi.org/10.1016/j.heliyon.2024.e3951310.1016/j.heliyon.2024.e39513 ↗
30. Murison, S., Shalaby, A., & Mufti, A. (2005). Concrete-filled, glass fiber–reinforced polymer dowels for load transfer in jointed rigid pavements. Transportation Research Record: Journal of the Transportation Research Board, 1919(1), 54–64. https://doi.org/10.1177/036119810519190010710.1177/0361198105191900107 ↗
31. Papadimitropoulos, V. C., Tsikas, P. K., & Chassiakos, A. P. (2020). Modeling the influence of environmental factors on concrete evaporation rate. Journal of Soft Computing in Civil Engineering, 4(4), 79–97. https://doi.org/10.22115/scce.2020.24607110.22115/scce.2020.246071 ↗
32. Pelisser, F., De Souza, S. S., La Rovere, H. L., & De Andrade Pinto, R. C. (2010). Effect of the addition of synthetic fibers to concrete thin slabs on plastic shrinkage cracking. Construction and Building Materials, 24(11), 2171–2176. https://doi.org/10.1016/j.conbuildmat.2010.04.04110.1016/j.conbuildmat.2010.04.041 ↗
33. Phillips, K., Harlan, M., & Roberts-Wollmann, C. (2005). Performance of a bridge deck with glass fiber reinforced polymer bars as the top mat of reinforcement [Technical report]. Virginia Tech. https://vtechworks.lib.vt.edu/bitstream/handle/10919/46687/05-cr24.pdf
34. Ponphaiboon, J., Krongrawa, W., Aung, W. W., Chinatangkul, N., Limmatvapirat, S., & Limmatvapirat, C. (2023). Advances in natural product extraction techniques, electrospun fiber fabrication, and the integration of experimental design: A comprehensive review. Molecules, 28(13), Article 5163. https://doi.org/10.3390/molecules2813516310.3390/molecules28135163 ↗
35. Rahmani, T., Kiani, B., Bakhshi, M., & Shekarchizadeh, M. Application of different fibers to reduce plastic shrinkage cracking of concrete. In Proceedings of the 7th RILEM International Conference on Cracking in Pavements: Mechanisms, Modeling, Testing, Detection, Prevention and Case Histories. Springer. 635–642. https://doi.org/10.1007/978-94-007-4566-7_6210.1007/978-94-007-4566-7_62 ↗
36. Rajak, D. K., Wagh, P. H., & Linul, E. (2022). A review on synthetic fibers for polymer matrix composites: Performance, failure modes and applications. Materials, 15(14), Article 4790. https://doi.org/10.3390/ma1514479010.3390/ma15144790 ↗
37. Safiuddin, M., Kaish, A. B. M. A., Woon, C. O., & Raman, S. N. (2018). Early-age cracking in concrete: Causes, consequences, remedial measures, and recommendations. Applied Sciences, 8(10), Article 1730. https://doi.org/10.3390/app810173010.3390/app8101730 ↗
38. Sayahi, F., Emborg, M., Hedlund, H., & Cwirzen, A. (2021). Effect of steel fibres extracted from recycled tyres on plastic shrinkage cracking in self-compacting concrete. Magazine of Concrete Research, 73(24), 1270–1282. https://doi.org/10.1680/jmacr.20.0011610.1680/jmacr.20.00116 ↗
39. Sirajuddin, M., & Gettu, R. (2018). Plastic shrinkage cracking of concrete incorporating mineral admixtures and its mitigation. Materials and Structures, 51, 1173. https://doi.org/10.1617/s11527-018-1173-410.1617/s11527-018-1173-4 ↗
40. Sivakumar, A., & Santhanam, M. (2007). A quantitative study on the plastic shrinkage cracking in high-strength hybrid fibre reinforced concrete. Cement and Concrete Composites, 29(7), 575–581. https://doi.org/10.1016/j.cemconcomp.2007.03.00510.1016/j.cemconcomp.2007.03.005 ↗
41. Sohaib, N., Mamoon, R., G, S., & F, S. (2018). Using polypropylene fibers in concrete to achieve maximum strength. In Proceedings of the Eighth International Conference on Advances in Civil and Structural Engineering (CSE 2018). Institute of Research Engineers and Doctors. 37–42. https://doi.org/10.15224/978-1-63248-145-0-3610.15224/978-1-63248-145-0-36 ↗
42. Souche, J. C., Bendimerad, A. Z., Roziere, E., Salgues, M., Devillers, P., Garcia-Diaz, E., & Loukili, A. (2017). Early age behaviour of recycled concrete aggregates under normal and severe drying conditions. Journal of Building Engineering, 13, 244–253. https://doi.org/10.1016/j.jobe.2017.08.00710.1016/j.jobe.2017.08.007 ↗
43. Sriram, M., & Aswin Sidhaarth, K. R. (2022). Various properties of natural and artificial fibers with cementitious composites in hybrid form – A review. Materials Today: Proceedings, 60, 2018–2025. https://doi.org/10.1016/j.matpr.2022.01.26610.1016/j.matpr.2022.01.266 ↗
44. Subash, S., & Subash, S. (2024). Scaling in concrete: Causes, prevention, and repair. In Industrial Scale Inhibition: Principles, Design, and Applications. Wiley. 341–356 https://doi.org/10.1002/9781394191208.ch1710.1002/9781394191208.ch17 ↗
45. Tioua, T., Kriker, A., Barluenga, G., & Palomar, I. (2017). Influence of date palm fiber and shrinkage reducing admixture on self-compacting concrete performance at early age in hot-dry environment. Construction and Building Materials, 154, 721–733. https://doi.org/10.1016/j.conbuildmat.2017.07.22910.1016/j.conbuildmat.2017.07.229 ↗
46. Topçu, I. B., & Elgün, V. B. (2004). Influence of concrete properties on bleeding and evaporation. Cement and Concrete Research, 34(2), 275–281. https://doi.org/10.1016/j.cemconres.2003.07.00410.1016/j.cemconres.2003.07.004 ↗
47. Topçu, İ. B., & Işıkdağ, B. (2018). A review on the effect of environmental conditions on concrete evaporation and bleeding. In Lecture Notes in Civil Engineering. Springer. 7;413–426 https://doi.org/10.1007/978-3-319-64349-6_3310.1007/978-3-319-64349-6_33 ↗
48. Wei, Y., Guo, W., & Zhang, Q. (2020). A model for predicting evaporation from fresh concrete surface during the plastic stage. Drying Technology, 38(16), 2231–2241. https://doi.org/10.1080/07373937.2019.169101210.1080/07373937.2019.1691012 ↗
49. Yaghmour, E., Abu Qamar, M., Naito, C., Suleiman, M., Fox, J., Romero, C., & Neti, S. (2024). Pressure drop and heat transfer properties for normal weight and lightweight pervious concrete. Construction and Building Materials, 425, Article 135947. https://doi.org/10.1016/j.conbuildmat.2024.13594710.1016/j.conbuildmat.2024.135947 ↗
50. Yakoubi, I., Aggoun, S., Ait Aider, H., & Houari, H. (2016). The influence of bleeding, extra water and superplasticizer on the SCC plastic shrinkage cracking: Case of hot weather. Journal of Adhesion Science and Technology, 30(23), 2596–2618. https://doi.org/10.1080/01694243.2016.118986910.1080/01694243.2016.1189869 ↗
51. Yang, J., Guo, Y., Shen, A., Chen, Z., Qin, X., & Zhao, M. (2019). Research on drying shrinkage deformation and cracking risk of pavement concrete internally cured by SAPs. Construction and Building Materials, 227, Article 116705. https://doi.org/10.1016/j.conbuildmat.2019.11670510.1016/j.conbuildmat.2019.116705 ↗
52. Yoo, D. Y., & Banthia, N. (2016). Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review. Cement and Concrete Composites, 73, 267–280. https://doi.org/10.1016/j.cemconcomp.2016.08.00110.1016/j.cemconcomp.2016.08.001 ↗
53. Yuan, Y., & Jiang, J. (2011). Prediction of temperature response in concrete in a natural climate environment. Construction and Building Materials, 25(8), 3159–3167. https://doi.org/10.1016/j.conbuildmat.2010.10.00810.1016/j.conbuildmat.2010.10.008 ↗
54. Zakaria, M., Bhuiyan, M. A. R., Hossain, M. S., Khan, N. M. M. U., Salam, M. A., & Nakane, K. (2024). Advances of polyolefins from fiber to nanofiber: Fabrication and recent applications. Discover Nano, 19(1), 1–36. https://doi.org/10.1186/s11671-023-03945-y10.1186/s11671-023-03945-y ↗
55. Zhang, B., Masmoudi, R., & Benmokrane, B. (2004). Behaviour of one-way concrete slabs reinforced with CFRP grid reinforcements. Construction and Building Materials, 18(8), 625–635. https://doi.org/10.1016/j.conbuildmat.2004.04.00710.1016/j.conbuildmat.2004.04.007 ↗