Effect of Impact Load on Splice Length of Reinforcing Bars
Source abstract
Abstract
Abstract Impact loading damage of reinforced concrete (RC) members deteriorates bond strength of reinforcing bars. To understand the effect of strain rate on the bond strength of reinforcing bars in RC beams under impact load, drop hammer test was performed on twenty-four simply supported RC beams with lap spliced bars at the mid-span. The test parameters were reinforcing bar diameter, splice length, drop height, and hammer mass. The dynamic responses including the impact load history, mid-span deflection history, crack distribution, and strain history of reinforcing bar were evaluated. Although the designed bar development length was 31–69% of the requirement of current design codes under static load, the tensile strength of bar splices was greater than the dynamic yield strength when subjected to large impact energy under impact load. On the basis of the test results, existing design equations for the bar development length under static load were modified to consider the impact loading effect on the bond strength. Factors related to the strain rate effect of materials, impact damage, and impact energy loss were proposed. The prediction of the proposed method agreed well with the tensile strength of bar splices under impact load.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. ACI (American Concrete Institute). (2003). “Bond and development of straight reinforcing bars in tension (ACI 408R-03).” ACI Committee 408, Farmington Hills, MI, 1-48.
2. ACI (American Concrete Institute). (2019). “Building code requirements for structural concrete and commentary.” ACI Committee 318, Farmington Hills, MI, 1-623.
3. ASTM. (2018). Standard test method for compressive strength of cylindrical concrete specimens. C39, West Conshohocken, PA.
4. Biggs, J. M. (1964). Introduction to Structural Dynamics. New York: McGraw-Hill Book Company.
5. Bischoff, P. H., & Perry, S. H. (1991). Compressive behaviour of concrete at high strain rates. Materials and Structures,24(6), 425–450.10.1007/BF02472016 ↗
6. Comite Euro-International du Beton. (1988). Concrete Structures under Impact and Impulsive Loading (p. 187). CEB Bulletin: Lausanne, Switzerland.
7. Eurocode 2 (British Standards Institution). (2004). “Design of concrete structures. London, UK, 1-225.
8. Fib. (2010). fib Model Code for Concrete Structures (pp. 1–420). Germany: Ernst & Sohn.
9. Fujikake, K., Li, B. and Soeum, S. (2009). “Impact Response of Reinforced Concrete Beams and its Analytical Evaluation.” J. Struct. Eng., ASCE, 135(8), 938-950.10.1061/(ASCE)ST.1943-541X.0000039 ↗
10. Hansen, R. J., & Liepins, A. A. (1962). Behavior of bond under dynamic loading. ACI J. Proc.,59(4), 563–583.
11. Hughes, G., & Beeby, A. W. (1982). Investigation of the effects of impact loading on concrete beams. Journal of the Structural Engineering. American Society of Civil Engineers,60B(3), 45–52.
12. Hwang, H. J., Kang, T. H.-K., & Kim, C. S. (2019a). Numerical model for flexural behavior of rc members subjected to low-velocity impact loads. ACI Struct J.,116(2), 65–76.
13. Hwang, H. J., Park, H. G., & Yi, W. J. (2017). Nonuniform bond stress distribution model for evaluation of bar development length. ACI Struct. J.,113(1–6), 839–849.
14. Hwang, H. J., Zang, L., & Ma, G. (2019b). Effect of impact loading on bar development length in CCT node. Journal of Structural Integrity and Maintenance,4(1), 26–36.10.1080/24705314.2019.1565059 ↗
15. Ishikawa, N., Katsuki, S., and Takemoto, K. (2002). “Dynamic Analysis of Prestressed Concrete Beams under Impact and High Speed Loadings.” Proc. of 6th Int. Conf. on Structures under Shock and Impact, WIT Press, Southampton, 247-256.
16. Jacques, E., & Saatcioglu, M. (2019a). High strain rate bond characteristics of reinforced concrete beam-ends. International Journal of Impact Engineering,130, 192–202.10.1016/j.ijimpeng.2019.04.012 ↗
17. Jacques, E., & Saatcioglu, M. (2019b). Bond-slip modelling of reinforced concrete lap splices subjected to low and high strain rates. Engineering Structures,195, 568–578.10.1016/j.engstruct.2019.05.104 ↗
18. Jacques, E., & Saatcioglu, M. (2020). High strain rate response of reinforced concrete lap-spliced beams. Journal of Structural Engineering, ASCE,146(1), 04019165.10.1061/(ASCE)ST.1943-541X.0002463 ↗
19. Kent, D. C., and Park, R. (1971). “Flexural Members with confined concrete.” Proc., ASCE, 97(7), 1969-1990.10.1061/JSDEAG.0002957 ↗
20. Kishi, N., Ikeda, K., Mikami, H., and Yamaguchi, E. (2001). Dynamic behavior of rc beams under steel weight impact loading-effects of nose-shape of steel weight Proc. of 3rd Int. Conf. on Concrete under Severe Conditions, Univ. of British Columbia, Vancouver, Canada, 660-667.
21. Kulkarni, S. M., & Shan, S. P. (1998). Response of reinforced concrete beams at high strain rates. ACI Struct. J.,95(6), 705–715.
22. Li, M., & Li, H. (2011). Effects of strain rate on reinforced concrete beam. J. Adv. Mater. Research,243–249, 4033–4036.10.4028/www.scientific.net/AMR.243-249.4033 ↗
23. Li, B., Park, R., & Tanaka, H. (2000). Constitutive behavior of high-strength concrete under dynamic loads. ACI Struct. J.,97(4), 619–629.
24. Malvar, L. J., & Ross, C. A. (1998). Review of strain rate effects for concrete in tension. ACI Materials Journal,95(6), 735–739.
25. Mattock, A. H. (1967). Discussion of rotational capacity of reinforced concrete beams. J. Struct. Div.,93(ST2), 519–522.10.1061/JSDEAG.0001678 ↗
26. Ou, Y. C., & Nguyen, N. D. (2014). Plastic hinge length of corroded reinforced concrete beams. ACI Struct. J.,111(5), 1049–1058.
27. Panteki, E., Máca, P., & Häussler-Combe, U. (2017). Finite element analysis of dynamic concrete-to-rebar bond experiments in the push-in configuration. International Journal of Impact Engineering,106, 155–170.10.1016/j.ijimpeng.2017.03.016 ↗
28. Paschen, H., Steinert, J., & Hjorth, O. (1974). Untersuchungen über das Verbundverhalten von Betonstählen bei Kurzzeitbeanspruchung. TU Braunschweig: Forschungsbericht.
29. Rezansoff, T., M. P. Bufkin, J. O. Jirsa, and J. E. Breen. (1975). “The performance of lapped splices under rapid loading.” Research Rep. No. 154-2. Austin, TX: Center for Highway Research, Univ. of Texas at Austin.
30. Scott, B. D., Park, R., & Priestley, M. J. N. (1982). Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates. ACI Struct. J.,79(1), 13–27.
31. Shah, I. K., & Hansen, R. J. (1963). Behavior of bond under dynamic loading. Cambridge: Dept. of Civil Engineering, Massachusetts Institute of Technology.10.21236/AD0406117 ↗
32. Solomos, G., & Berra, M. (2010). Rebar pullout testing under dynamic Hopkinson bar induced impulsive loading. Materials and Structures,43(1–2), 247–260.10.1617/s11527-009-9485-z ↗
33. Soroushian, P., & Choi, K. (1987). Steel mechanical properties at different strain rates. Journal of the Structural Engineering. American Society of Civil Engineers,113(4), 663–672.
34. Spacone, E., and EI-Tawil, S. (2004). “Nonlinear Analysis of Steel-Concrete Composite Structures: State of the Art.” J. Struct. Eng., ASCE, 130(2), 159-168.10.1061/(ASCE)0733-9445(2004)130:2(159) ↗
35. Suzuki, S., Katsuki, S., Ishikawa, N., Ishikawa, Y., & Furukawa, K. (1996). A fundamental study on local dissipated energy and rheology model at impact point of concrete specimen by the pendulum impact test. Journal of Structural Mechanics and Earthquake Engineering,36(543), 91–105. (in Japanese).
36. Toikka, L., Braimah, A., Razaqpur, G., & Foo, S. (2015). Strain rate effect on development length of steel reinforcement. Journal of the Structural Engineering. American Society of Civil Engineers,141(11), 04015044.
37. Wakabayashi, M., Nakamura, T., Yoshida, N., Iwai, S. and Watanabe, Y. (1980). “Dynamic Loading Effects on the Structural Performance of Concrete and Steel materials and Beams.” Proc. 7th World Conf. on Earthquake Engineering, Turkish National Committee on Earthquake Engineering, Istambul, Turkey.
38. Yang, G., & Lok, T. (2007). Analysis of RC structures subjected to air-blast loading accounting for strain rate effect of steel reinforcement. International Journal of Impact Engineering,34(12), 1924–1935.10.1016/j.ijimpeng.2006.11.009 ↗