Effect of Recycled Ceramic Fine Aggregate (RCFA) on Strength and Durability of Concrete with Varying Water-To-Binder Ratios
Source abstract
Abstract
To promote the effective recycling of waste ceramic tiles and alleviate the shortage of natural river sand, this study systematically investigates the strength and durability of concrete incorporating recycled ceramic fine aggregate (RCFA), herein referred to as RCFA concrete, at water-to-binder (W/B) ratios ranging from 0.25 to 0.45. The RCFA was produced by crushing waste ceramic tiles characterized by low water absorption. As indicated by experimental results, RCFA concrete exhibits improved compressive strength and enhanced resistance to freeze–thaw cycles and chloride ion penetration compared to natural aggregate concrete. However, the beneficial effects of RCFA diminish at lower W/B ratios. Furthermore, the incorporation of RCFA significantly reduces autogenous shrinkage and alleviates the decline in internal relative humidity, with these effects being more pronounced at lower W/B ratios. Conversely, RCFA increases drying shrinkage at the W/B ratio of 0.45, although this negative effect is mitigated as the W/B ratio decreases. Mercury intrusion porosimetry and scanning electron microscopy analyses reveal that RCFA improves concrete performance by reducing microporosity and enhancing the interfacial bonding between fine aggregates and hydration products.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Alsaif, A. (2021). Utilization of ceramic waste as partially cement substitute—a review. Construction and Building Materials, 300, Article 124009. https://doi.org/10.1016/j.conbuildmat.2021.12400910.1016/j.conbuildmat.2021.124009 ↗
2. Alves, A. V., Vieira, T. F., de Brito, J., & Correia, J. R. (2014). Mechanical properties of structural concrete with fine recycled ceramic aggregates. Construction and Building Materials, 64, 103–113. https://doi.org/10.1016/j.conbuildmat.2014.04.03710.1016/j.conbuildmat.2014.04.037 ↗
3. Awoyera, P. O., Ndambuki, J. M., Akinmusuru, J. O., & Omole, D. O. (2018). Characterization of ceramic waste aggregate concrete. HBRC Journal., 14(3), 282–287. https://doi.org/10.1016/j.hbrcj.2016.11.00310.1016/j.hbrcj.2016.11.003 ↗
4. Awoyera, P. O., Olalusi, O. B., & Iweriebo, N. (2021). Physical, strength, and microscale properties of plastic fiber-reinforced concrete containing fine ceramics particles. Materialia, 15, Article 100970. https://doi.org/10.1016/j.mtla.2020.10097010.1016/j.mtla.2020.100970 ↗
5. Binici, H. (2007). Effect of crushed ceramic and basaltic pumice as fine aggregates on concrete mortars properties. Construction and Building Materials, 21, 1191–1197. https://doi.org/10.1016/j.conbuildmat.2006.06.00210.1016/j.conbuildmat.2006.06.002 ↗
6. Chen, B., & Qian, X. (2025). Explainable data-driven analysis of uncertainty propagation in 3D concrete printing via adaptive polynomial chaos expansion. Automation in Construction, 178, Article 106414. https://doi.org/10.1016/j.autcon.2025.10641410.1016/j.autcon.2025.106414 ↗
7. Dinh, H. L., Liu, J., Ong, D. E. L., & Doh, J. H. (2022). A sustainable solution to excessive river sand mining by utilizing by-products in concrete manufacturing: A state-of-the-art review. Cleaner Materials, 6, Article 100140. https://doi.org/10.1016/j.clema.2022.10014010.1016/j.clema.2022.100140 ↗
8. Ebrahimi, K., Daiezadeh, M. J., Zakertabrizi, M., Zahmatkesh, F., & Habibnejad Korayem, A. (2018). A review of the impact of micro- and nanoparticles on freeze-thaw durability of hardened concrete: Mechanism perspective. Construction and Building Materials, 186, 1105–1113. https://doi.org/10.1016/j.conbuildmat.2018.08.02910.1016/j.conbuildmat.2018.08.029 ↗
9. Elçi, H. (2016). Utilisation of crushed floor and wall tile wastes as aggregate in concrete production. Journal of Cleaner Production, 112, 742–752. https://doi.org/10.1016/j.jclepro.2015.07.00310.1016/j.jclepro.2015.07.003 ↗
10. Elemam, W. E., Agwa, I. S., & Tahwia, A. M. (2023). Reusing ceramic waste as a fine aggregate and supplemental cementitious material in the manufacture of sustainable concrete. Buildings. https://doi.org/10.3390/buildings1311272610.3390/buildings13112726 ↗
11. Etxeberria, M., & Gonzalez-Corominas, A. (2018). The assessment of ceramic and mixed recycled aggregates for high strength and low shrinkage concretes. Materials and Structures, 51, Article 129. https://doi.org/10.1617/s11527-018-1244-610.1617/s11527-018-1244-6 ↗
12. Etxeberria, M., & Vegas, I. (2015). Effect of fine ceramic recycled aggregate (RA) and mixed fine RA on hardened properties of concrete. Magazine of Concrete Research, 67, 645–655. https://doi.org/10.1680/macr.14.0020810.1680/macr.14.00208 ↗
13. Gao, Y., Cheng, Z., Yu, J., Guo, X., Liu, Y., & Chen, W. (2025a). Mechanical performance enhancement of UHPC via ITZ improvement using graphene oxide-coated steel fibers. Cement and Concrete Composites, 157, Article 105931. https://doi.org/10.1016/j.cemconcomp.2025.10593110.1016/j.cemconcomp.2025.105931 ↗
14. Gao, Y., Zou, F., Sui, H., Xu, J., Wang, S., Lu, S., Yu, J., Chen, W., Liu, Y., Chen, J., & Zhao, L. (2025b). Dispersion strategies development for high-performance carbon nanomaterials-reinforced cementitious composites—Critical review on properties and future challenges. Materials & Design, 259, Article 114789. https://doi.org/10.1016/j.matdes.2025.11478910.1016/j.matdes.2025.114789 ↗
15. Gao, Y., Zou, F., Wang, S., Sui, H., Yu, J., Xu, B., Chen, W., & Liu, Y. (2025c). Redefining the cement substitution potential of recycled concrete powder using graphene oxide coating. Cement and Concrete Composites, 164, Article 106276. https://doi.org/10.1016/j.cemconcomp.2025.10627610.1016/j.cemconcomp.2025.106276 ↗
16. Standardization Administration of the People’s Republic of China, GB/T14684–2022 Sand for construction, (2022).
17. Standardization Administration of the People’s Republic of China, GB/T 25176–2010 Recycled fine aggregate for concrete and mortar, (2010).
18. Ministry of Housing and Urban-Rural Construction of the People’s Republic of China, GB/T 50082–2009 Standard for test methods of long-term performance and durability of ordinary concrete, (2009).
19. Ministry of Housing and Urban-Rural Construction of the People’s Republic of China, GB/T 50081-2019 Standard for test methods of concrete physical and mechanical properties, (2019).
20. Gonzalez-Corominas, A., & Etxeberria, M. (2014). Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates. Construction and Building Materials, 68, 618–626. https://doi.org/10.1016/j.conbuildmat.2014.07.01610.1016/j.conbuildmat.2014.07.016 ↗
21. Hashim, A. A., Anaee, R., Nasr, M. S., Shubbar, A., & Alahmari, T. S. (2025). Mechanical properties, corrosion resistance and microstructural analysis of recycled aggregate concrete made with ceramic wall waste and ultrafine ceria. Journal of Materials Research and Technology, 36, 627–640. https://doi.org/10.1016/j.jmrt.2025.03.15410.1016/j.jmrt.2025.03.154 ↗
22. Higashiyama, H., Yagishita, F., Sano, M., & Takahashi, O. (2012). Compressive strength and resistance to chloride penetration of mortars using ceramic waste as fine aggregate. Construction and Building Materials, 26, 96–101. https://doi.org/10.1016/j.conbuildmat.2011.05.00810.1016/j.conbuildmat.2011.05.008 ↗
23. Ministry of Housing and Urban-Rural Construction of the People’s Republic of China, JGJ/T 240-2011 Technical specification for application of recycled aggregate, (2011).
24. Jiang, S., Wang, Y., Cheng, Z., & Chen, B. (2026). Adaptive forecasting of stochastic crack growth using empirical mode decomposition: Gaussian process regression for structural health monitoring. Structure and Infrastructure Engineering, 0, 1–14. https://doi.org/10.1080/15732479.2026.261796510.1080/15732479.2026.2617965 ↗
25. Khatib, J. M. (2005). Properties of concrete incorporating fine recycled aggregate. Cement and Concrete Research, 35, 763–769. https://doi.org/10.1016/j.cemconres.2004.06.01710.1016/j.cemconres.2004.06.017 ↗
26. Liu, F., Liu, J., Ma, B., Huang, J., & Li, H. (2015). Basic properties of concrete incorporating recycled ceramic aggregate and ultra-fine sand. Journal of Wuhan University of Technology-Materials Science Ed., 30, 352–360. https://doi.org/10.1007/s11595-015-1152-310.1007/s11595-015-1152-3 ↗
27. Liu, Y., Zhang, S., Fang, Z., Sun, M., Fan, Y., & Shah, S. P. (2025). Influence of water-to-binder ratio on autogenous shrinkage and electrical resistivity of cement mortar. Buildings. https://doi.org/10.3390/buildings1509144410.3390/buildings15091444 ↗
28. López, V., Llamas, B., Juan, A., Morán, J. M., & Guerra, I. (2007). Eco-efficient concretes: Impact of the use of white ceramic powder on the mechanical properties of concrete. Biosystems Engineering, 96, 559–564. https://doi.org/10.1016/j.biosystemseng.2007.01.00410.1016/j.biosystemseng.2007.01.004 ↗
29. Lu, Z., Feng, Z., Yao, D., Li, X., & Ji, H. (2021). Freeze-thaw resistance of ultra-high performance concrete: Dependence on concrete composition. Construction and Building Materials, 293, Article 123523. https://doi.org/10.1016/j.conbuildmat.2021.12352310.1016/j.conbuildmat.2021.123523 ↗
30. Medina, C., Sánchez de Rojas, M. I., & Frías, M. (2013). Freeze-thaw durability of recycled concrete containing ceramic aggregate. Journal of Cleaner Production, 40, 151–160. https://doi.org/10.1016/j.jclepro.2012.08.04210.1016/j.jclepro.2012.08.042 ↗
31. Mladenovič, A., Šturm, S., Mirtič, B., & Šuput, J. S. (2009). Alkali silica reaction in mortars made from aggregates having different degrees of crystallinity. Ceramics-Silikáty, 53, 31–41.
32. Ogrodnik, P., & Szulej, J. (2018). The assessment of possibility of using sanitary ceramic waste as concrete aggregate—Determination of the basic material characteristics. Applied Sciences. https://doi.org/10.3390/app807120510.3390/app8071205 ↗
33. Oyunbileg, D., Amgalan, J., Batbaatar, T., & Temuujin, J. (2023). Evaluation of thermal and freeze-thaw resistances of the concretes with the silica fume addition at different water-cement ratio. Case Studies in Construction Materials, 19, Article e02633. https://doi.org/10.1016/j.cscm.2023.e0263310.1016/j.cscm.2023.e02633 ↗
34. Pacheco-Torgal, F., & Jalali, S. (2010). Reusing ceramic wastes in concrete. Construction and Building Materials, 24, 832–838. https://doi.org/10.1016/j.conbuildmat.2009.10.02310.1016/j.conbuildmat.2009.10.023 ↗
35. Peng, Z., Wang, X., Liu, X., Ding, L., Tang, B., & Wu, Z. (2026). Carbon emission assessment of basalt fiber and basalt fiber-reinforced polymer (BFRP) reinforced/strengthened concrete structures. Structures, 85, Article 111128. https://doi.org/10.1016/j.istruc.2026.11112810.1016/j.istruc.2026.111128 ↗
36. China Building Industry Press, JGJ 55-2011 Specification for mix proportion design of ordinary concrete, (2011).
37. Rashad, A. M., & Essa, G. M. F. (2020). Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature. Cement and Concrete Composites, 111, Article 103617. https://doi.org/10.1016/j.cemconcomp.2020.10361710.1016/j.cemconcomp.2020.103617 ↗
38. Saloma, Hanafiah, Urmila, D. (2017). The effect of water binder ratio and fly ash on the properties of foamed concrete, AIP Conference Proceedings, vol. 1903, p. 050011. https://doi.org/10.1063/1.5011550.10.1063/1.5011550 ↗
39. Schulze, J. (1999). Influence of water-cement ratio and cement content on the properties of polymer-modified mortars. Cement and Concrete Research, 29, 909–915. https://doi.org/10.1016/S0008-8846(99)00060-510.1016/S0008-8846(99)00060-5 ↗
40. Siddique, S., Shrivastava, S., Chaudhary, S., & Gupta, T. (2018). Strength and impact resistance properties of concrete containing fine bone china ceramic aggregate. Construction and Building Materials, 169, 289–298. https://doi.org/10.1016/j.conbuildmat.2018.02.21310.1016/j.conbuildmat.2018.02.213 ↗
41. Standardization Administration of the People’s Republic of China, GB/T 4100–2015 Ceramic tiles, (2015).
42. Tavakoli, D., Heidari, A., & Karimian, M. (2013). Properties of concretes produced with waste ceramic tile aggregate. Asian Journal of Civil Engineering, 14, 369–382.
43. Torkittikul, P., & Chaipanich, A. (2010). Utilization of ceramic waste as fine aggregate within Portland cement and fly ash concretes. Cement and Concrete Composites, 32, 440–449. https://doi.org/10.1016/j.cemconcomp.2010.02.00410.1016/j.cemconcomp.2010.02.004 ↗
44. Wang, Y., Huang, H., Zeng, J., Hu, W., & Cheng, Y. (2023). Axial compressive behavior of recycled ceramic coarse aggregate concrete-filled steel tubular columns. Journal of Constructional Steel Research, 210, Article 108040. https://doi.org/10.1016/j.jcsr.2023.10804010.1016/j.jcsr.2023.108040 ↗
45. Wu, L., Farzadnia, N., Shi, C., Zhang, Z., & Wang, H. (2017). Autogenous shrinkage of high performance concrete: A review. Construction and Building Materials, 149, 62–75. https://doi.org/10.1016/j.conbuildmat.2017.05.06410.1016/j.conbuildmat.2017.05.064 ↗
46. Xu, F., Lin, X., Zhou, A., & Liu, Q. (2022). Effects of recycled ceramic aggregates on internal curing of high performance concrete. Construction and Building Materials, 322, Article 126484. https://doi.org/10.1016/j.conbuildmat.2022.12648410.1016/j.conbuildmat.2022.126484 ↗
47. Xue, Z., Lam, S. E., Li, B., & Lo, C. I. (2024). Shear strength estimation of nonseismically designed exterior beam–column joints strengthened with unsymmetrical chamfers. Journal of Structural Engineering, 150, Article 04024156. https://doi.org/10.1061/JSENDH.STENG-1300610.1061/JSENDH.STENG-13006 ↗
48. Yang, L., Shi, C., Liu, J., & Wu, Z. (2021). Factors affecting the effectiveness of internal curing: A review. Construction and Building Materials, 267, Article 121017. https://doi.org/10.1016/j.conbuildmat.2020.12101710.1016/j.conbuildmat.2020.121017 ↗
49. Yang, Y., Yue, X., Chen, B., Yang, W., Guo, W., & Wang, H. (2024). Autogenous shrinkage and cracking of ultra-high-performance concrete with soda residue as an internal curing agent. Materials and Structures, 57, Article 216. https://doi.org/10.1617/s11527-024-02499-410.1617/s11527-024-02499-4 ↗
50. Ye, B., Zhang, Y., Han, J., & Pan, P. (2019). Effect of water to binder ratio and sand to binder ratio on shrinkage and mechanical properties of high-strength engineered cementitious composite. Construction and Building Materials, 226, 899–909. https://doi.org/10.1016/j.conbuildmat.2019.07.30310.1016/j.conbuildmat.2019.07.303 ↗
51. Yiğiter, H., Yazıcı, H., & Aydın, S. (2007). Effects of cement type, water/cement ratio and cement content on sea water resistance of concrete. Building and Environment, 42, 1770–1776. https://doi.org/10.1016/j.buildenv.2006.01.00810.1016/j.buildenv.2006.01.008 ↗
52. Zegardło, B., Szeląg, M., & Ogrodnik, P. (2016). Ultra-high strength concrete made with recycled aggregate from sanitary ceramic wastes – The method of production and the interfacial transition zone. Construction and Building Materials, 122, 736–742. https://doi.org/10.1016/j.conbuildmat.2016.06.11210.1016/j.conbuildmat.2016.06.112 ↗
53. Zhang, L., Shen, H., Xu, K., Huang, W., Wang, Y., Chen, M., & Han, B. (2023). Effect of ceramic waste tile as a fine aggregate on the mechanical properties of low-carbon ultrahigh performance concrete. Construction and Building Materials, 370, Article 130595. https://doi.org/10.1016/j.conbuildmat.2023.13059510.1016/j.conbuildmat.2023.130595 ↗
54. Zhang, L., & Zha, X. (2025). Reactivity mechanism and structural properties of alkali-activated granitic waste treated with low-cementitious additives. Construction and Building Materials, 492, Article 143077. https://doi.org/10.1016/j.conbuildmat.2025.14307710.1016/j.conbuildmat.2025.143077 ↗