Compressive Behavior of Concrete Containing Glass Fibers and Confined with Glass FRP Composites
Source abstract
Abstract
Abstract In this paper, numerous experimental tests were carried out to study the behavior of concrete containing glass fibers and confined with glass fiber-reinforced polymer (GFRP). Concrete specimens containing different fiber percentages ( 0.3 wt.%, 0.6 wt.%, 0.9 wt.% or 1.2 wt.%) and with different strengths of concrete (8.5 MPa, 16 MPa and 25 MPa) and different confinement levels (two, four and six layers of GFRP) were used as research parameters. The samples were tested to failure under pure axial compression. The results imply that the confinement effect with GFRP is relatively higher for concrete samples containing glass fiber (GFCC) with a percentage equal to 0.6 wt.%. The theoretical of stress ratios (fcc/fco) estimated by using existing ultimate strength models are found to be close to the experimental results for high strength of GFCC, but not close to the experimental results for low strength of GFCC.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Al-Salloum, Y. A. (2007). Compressive strength models of FRP-confined concrete. In: S.T. Smith (Ed.), Proceedings of the Asia-Pacific conference of FRP in structures (APFIS 2007), Hong Kong: Univerisity of Hong Kong, 2007, pp. 175–180.
2. Bazli, M., Ashrafi, H., & Oskouei, A. V. (2016). Effect of harsh environments on mechanical properties of GFRP pultruded profiles. Composites Part B Engineering, 99, 203–215.10.1016/j.compositesb.2016.06.019 ↗
3. Benzaid, R., Mesbah, H., & Chikh, N. E. (2010). FRP-confined concrete cylinders: Axial compression experiments and strength model. Journal of Reinforced Plastics and Composites, 29(16), 2469–2488.10.1177/0731684409355199 ↗
4. Bisby, L. A., Dent, A. J., & Green, M. F. (2005). (2005) Comparison of confinement models for fiber-reinforced polymer-wrapped concrete. ACI Structural Journal, 102(1), 62–72.
5. Chao, S. H., Naaman, A. E., & Parra-Montesinos, G. J. (2009). Bond behavior of reinforcing bars in tensile strain-hardening fiber reinforced cement composites. ACI Structural Journal., 106, 897–906.
6. Christian, S. J., & Billington, S. L. (2011). Mechanical response of PHB- and cellulose acetate natural fiber-reinforced composites for construction applications. Composites Part B Engineering, 42(7), 1920–1928.10.1016/j.compositesb.2011.05.039 ↗
7. Cromwell, J. R., Harries, K. A., & Shahrooz, B. M. (2011). Environmental durability of externally bonded FRP materials intended for repair of concrete structures. Construction and Building Materials, 25, 2528–2539.10.1016/j.conbuildmat.2010.11.096 ↗
8. Feng, J. H., Su, Y. L., & Qian, C. X. (2019). Coupled effect of PP fiber, PVA fiber and bacteria on self-healing efficiency of early-age cracks in concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.11681010.1016/j.conbuildmat.2019.116810 ↗
9. Feng, P., Wang, J., Wang, Y., Loughery, D., & Niu, D. (2014). Effects of corrosive environments on properties of pultruded GFRP plates. Composites Part B Engineering, 67, 427–433.10.1016/j.compositesb.2014.08.021 ↗
10. Ganesan, N., Indira, P. V., & Sabeena, M. V. (2014). Bond stress slip response of bars embedded in hybrid fiber reinforced high performance concrete. Construction and Building Materials, 50, 108–115. https://doi.org/10.1016/j.conbuildmat.2013.09.03210.1016/j.conbuildmat.2013.09.032 ↗
11. Ghernouti, Y., & Rabehi, B. (2011). FRP-confined short concrete columns under compressive loading: Experimental and modeling investigation. Journal of Reinforced Plastics and Composites, 30(3), 241–255.10.1177/0731684410393054 ↗
12. Guo, Y. H., Hu, X. Y., & Lv, J. F. (2019). Experimental study on the resistance of basalt fiber reinforced concrete to chloride penetration. Construction and Building Materials, 223, 142–155. https://doi.org/10.1016/j.conbuildmat.2019.06.21110.1016/j.conbuildmat.2019.06.211 ↗
13. Kasagani, H., & Rao, C. B. K. (2018). Effect of graded fibers on stress strain behaviour of Glass Fiber Reinforced Concrete in tension. Construction and Building Materials, 183, 592–604. https://doi.org/10.1016/j.conbuildmat.2018.06.19310.1016/j.conbuildmat.2018.06.193 ↗
14. Kizilkanat, A. B., Kabay, N., Akyüncü, V., Chowdhury, S., & Akça, A. H. (2015). Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study. Construction and Building Materials, 100, 218–224.10.1016/j.conbuildmat.2015.10.006 ↗
15. Lam, L., & Teng, J. G. (2003). Design-oriented stress–strain model for FRP-confined concrete. Construction and Building Materials, 17, 471–489.10.1016/S0950-0618(03)00045-X ↗
16. Li, Y. L., Zhao, X. L., Raman Singh, R. K., & Al-Saadi, S. (2016). Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columns. Thin-Walled Structures, 106, 390–406.10.1016/j.tws.2016.05.014 ↗
17. Liu, F. Y., Ding, W. Q., & Qiao, Y. F. (2020). Experimental investigation on the tensile behavior of hybrid steel-PVA fiber reinforced concrete containing fly ash and slag powder. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.11800010.1016/j.conbuildmat.2020.118000 ↗
18. Meda, A., Mostosi, S., Rinaldi, Z., & Riva, P. (2016). Corroded RC columns repair and strengthening with high-performance fiber-reinforced concrete jacket. Materials and Structures, 49, 1967–1978.10.1617/s11527-015-0627-1 ↗
19. Mirmiran, A., & Shahawy, M. (1997). Dilation characteristics of confined concrete. Mech Cohesive-Frict Mater, 2(3), 237–249.10.1002/(SICI)1099-1484(199707)2:3<237::AID-CFM32>3.0.CO;2-2 ↗
20. Mohammadhosseini, H., Tahir, M. M., Alaskar, A., Alabduljabbar, H., & Alyousef, R. (2020). Enhancement of strength and transport properties of a novel preplaced aggregate fiber reinforced concrete by adding waste polypropylene carpet fibers. J Build Eng. https://doi.org/10.1016/j.jobe.2019.10100310.1016/j.jobe.2019.101003 ↗
21. Niu, D. T., Su, L., Luo, Y., Huang, D. G., & Luo, D. M. (2020). Experimental study on mechanical properties and durability of basalt fiber reinforced coral aggregate concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.11762810.1016/j.conbuildmat.2019.117628 ↗
22. Shaikh Ahmed, F. U. (2013). Review of mechanical properties of short fiber reinforced geopolymer composites. Construction and Building Materials, 43, 37–49.10.1016/j.conbuildmat.2013.01.026 ↗
23. Signorini, C., Sola, A., Malchiodi, B., Nobili, A., & Gatto, A. (2020). Failure mechanism of silica coated polypropylene fibers for Fiber Reinforced Concrete (FRC). Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2019.11754910.1016/j.conbuildmat.2019.117549 ↗
24. Spoelstra, M. R., & Monti, G. (1999). FRP-confined concrete model. Journal of Composites for Construction, 3(3), 143–150.10.1061/(ASCE)1090-0268(1999)3:3(143) ↗
25. Standards and literature references for composite materials—D638 (1990). 2nd Ed., ASTM, West Conshohocken, PA.
26. Sun, X. J., Gao, Z., Cao, P., & Zhou, C. J. (2019). Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete. Construction and Building Materials, 202, 58–72. https://doi.org/10.1016/j.conbuildmat.2019.01.01810.1016/j.conbuildmat.2019.01.018 ↗
27. Tahsiri, H., Sedehi, O., Khaloo, A., & Raisi, E. M. (2015). Experimental study of RC jacketed and CFRP strengthened RC beams. Construction and Building Materials, 95, 476–485.10.1016/j.conbuildmat.2015.07.161 ↗
28. Teng, J., Huang, Y. L., Lam, L., & Ye, L. P. (2007). Theoretical model for fiber-reinforced polymer-confined concrete. Journal of Composites for Construction, 11(2), 201–210.10.1061/(ASCE)1090-0268(2007)11:2(201) ↗
29. Wang, X. H., Zhang, S. R., Wang, C., Cao, K. L., Wei, P. Y., & Wang, J. X. (2019). Effect of steel fibers on the compressive and splitting-tensile behaviours of cellular concrete with millimeter-size pores. Construction and Building Materials., 221, 60–73. https://doi.org/10.1016/j.conbuildmat.2019.06.06910.1016/j.conbuildmat.2019.06.069 ↗
30. Xie, J. H., Fang, C., Lu, Z. Y., Li, Z. J., & Li, L. J. (2019). Effects of the addition of silica fume and rubber particles on the compressive behaviour of recycled aggregate concrete with steel fibers. Journal of Cleaner Production, 197, 656–667. https://doi.org/10.1016/j.jclepro.2018.06.23710.1016/j.jclepro.2018.06.237 ↗
31. Zheng, D., Song, W. D., Fu, J. X., Xue, G. L., Li, J. J., & Cao, S. A. (2020). Research on mechanical characteristics, fractal dimension and internal structure of fiber reinforced concrete under uniaxial compression. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.12035110.1016/j.conbuildmat.2020.120351 ↗
32. Zhu, D. J., Liu, S., Yao, Y. M., Li, G. S., Du, Y. X., & Shi, C. J. (2019). Effects of short fiber and pretension on the tensile behavior of basalt textile reinforced concrete. Cement and Concrete Composites, 96, 33–45. https://doi.org/10.1016/j.cemconcomp.2018.11.01510.1016/j.cemconcomp.2018.11.015 ↗