Evaluation of Bond Properties of Reinforced Concrete with Corroded Reinforcement by Uniaxial Tension Testing
Source abstract
Abstract
The degradation of the load-bearing capacity of reinforced concrete beams due to corrosion has a profoundly negative impact on the structural safety and integrity of a structure. The literature is limited with regard to models of bond characteristics that relate to the reinforcement corrosion percentage. In this study, uniaxial tensile tests were conducted on specimens with irregular corrosion of their reinforced concrete. The development of cracks in the corroded area was found to be dependent on the level of corrosion, and transverse cracks developed due to tensile loading. Based on this crack development, the average stress versus deformation in the rebar and concrete could be determined experimentally and numerically. The results, determined via finite element analysis, were calibrated using the experimental results. In addition, bond elements for reinforced concrete with corrosion are proposed in this paper along with a relationship between the shear stiffness and corrosion level of rebar.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Al-Hammoud, R., Soudki, K., & Topper, T. H. (2010). Bond analysis of corroded reinforced concrete beams under monotonic and fatigue loads. Cement & Concrete Composites, 32(3), 194–203.10.1016/j.cemconcomp.2009.12.001 ↗
2. Almusallam, A. A., Al-Gahtani, A. S., Aziz, A. R., & Rasheeduzzafar, M. (1996). Effect of reinforcement corrosion on bond strength. Construction and Building Materials, 10(2), 123–129.10.1016/0950-0618(95)00077-1 ↗
3. Auyeung, Y., Balaguru, P., & Chung, L. (2000). Bond behavior of corroded reinforced bars. ACI Materials Journal, 97(2), 214–220.
4. Azad, A. K., Ahmad, S., & Al-Gohi, B. H. A. (2010). Flexural strength of corroded reinforced concrete beams. Magazine of Concrete Research, 62(6), 405–414.10.1680/macr.2010.62.6.405 ↗
5. Azad, A. K., Ahmad, S., & Azher, S. A. (2007). Residual strength of corrosion-damaged reinforced concrete beams. ACI Materials Journal, 104(1), 40–47.
6. CEB-FIP, CEB-FIP Model Code 1990, (1991) Committee Euro-International Du Beton, Paris, France.
7. Coronelli, D., & Gambarova, P. (2004). Structural assessment of corroded reinforced concrete beams: modeling guidelines. Journal of Structural Engineering, 130(8), 1214–1224.10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗
8. Dekoster, M., Buyle-Bodin, F., Maurel, O., & Delmas, Y. (2003). Modeling of the flexural behaviour of RC beams subjected to localized and uniform corrosion. Engineering Structures, 25(10), 1333–1341.10.1016/S0141-0296(03)00108-1 ↗
9. Imam, A., Anifowose, F., & Azad, A. K. (2015). Residual of corroded reinforced concrete beam using and adaptive model based on ANN. International Journal of Concrete Structures and Materials, 9(2), 159–172.10.1007/s40069-015-0097-4 ↗
10. Kim, H. R. (2008). An evaluation study on the degradation of the load-bearing capacity by the rebar corrosion in reinforced concrete structures. Ph.D. Thesis. University of Tokyo, Tokyo, Japan.
11. Kim, H. R., Nagai, H., & Noguchi, T. (2008). Bond characteristics of reinforced concrete with corroded rebar in axially-loaded tension tests. In Proceedings of the Japan Concrete Institute, 30(1), 1101–1106.
12. Lee, H. S., Tomosawa, F., & Noguchi, T. (1996). Effects of rebar corrosion on the structural performance of singly reinforced beams. Durability of Building Materials and Components, 7(1), 571–580.
13. Soltani, A., Harries, K. A., & Shahrooz, B. M. (2013). Crack opening behavior of concrete reinforced with high strength reinforcing steel. International Journal of Concrete Structures and Materials., 7(4), 253–564.10.1007/s40069-013-0054-z ↗
14. Stewart, M. G. (2004). Spatial variability of pitting corrosion and its influence on structural fragility and reliability of RC beams in flexure. Structural Safety, 26(4), 453–470.10.1016/j.strusafe.2004.03.002 ↗
15. Yang, S., Fang, C. Q., Yuan, Z. J., & Yi, M. Y. (2015). Effects of reinforcement corrosion and repeated loads on performance of reinforced concrete beam. Advances in Structural Engineering, 18(8), 1257–1271.10.1260/1369-4332.18.8.1257 ↗
16. Yoon, S., Wang, K., Weiss, W. J., & Shah, S. P. (2000). Interaction between loading, corrosion, and serviceability of reinforced concrete. ACI Materials Journal, 97(6), 637–644.