Characterizations and Quantitative Estimation of Alkali-Activated Binder Paste from Microstructures
Source abstract
Abstract
Alkali-activated binder (AAB) is recently being considered as a sustainable alternative to portland cement (PC) due to its low carbon dioxide emission and diversion of industrial wastes and by-products such as fly ash and slag from landfills. In order to comprehend the behavior of AAB, detailed knowledge on relations between microstructure and mechanical properties are important. To address the issue, a new approach to characterize hardened pastes of AAB containing fly ash as well as those containing fly ash and slag was adopted using scanning electron microscopy (SEM) and energy dispersive X-ray spectra microanalyses. The volume stoichiometries of the alkali activation reactions were used to estimate the quantities of the sodium aluminosilicate (N–A–S–H) and calcium silicate hydrate (CSH) produced by these reactions. The 3D plots of Si/Al, Na/Al and Ca/Si atom ratios given by the microanalyses were compared with the estimated quantities of CSH(S) to successfully determine the unique chemical compositions of the N–A–S–H and CSH(S) for ten different AAB at three different curing temperatures using a constrained nonlinear least squares optimization formulation by general algebraic modeling system. The results show that the theoretical and experimental quantities of N–A–S–H and CSH(S) were in close agreement with each other. The R 2 values were 0.99 for both alkali-activated fly ash and alkali-activated slag binders.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. ASTM 7777C618. (2013). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
2. ASTM C989. (2013). Standard specification for slag cement for use in concrete and mortars. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
3. ASTM C33 M-13. (2013). Standard specification for concrete aggregates. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
4. ASTM C494 Type F. (2013). Specification for chemical admixtures for concrete. Annual book of ASTM standards, concrete and aggregates, 04.02. American Society for Testing and Materials.
5. Barbosa, V. F. F., Mackenzie, K. J. D., & Thaumaturgo, C. (2000). Synthesis and thermal behaviour of potassium sialate geopolymers. Materials Letters,57, 1477–1482.10.1016/S0167-577X(02)01009-1 ↗
6. Bazaara, M. S., Sherali, H. D., & Shetty, C. M. (2006). Nonlinear programming: Theory and algorithms. Hoboken, NJ: Wiley.10.1002/0471787779 ↗
7. Breck, D. W. (1974). Zeolite molecular sieves, structure, chemistry and use. New York, NY: Wiley.
8. Chen, W., & Brouwers, H. J. H. (2007). The hydration of slag, part 1: Reaction models for alkali-activated slag. Journal Materials Science,42, 428–443.10.1007/s10853-006-0873-2 ↗
9. Davidovits, J. (1982). Mineral polymers and methods of making them. US Patent 4,349,386.
10. Davidovits, J. (1983). Geopolymer chemistry and properties. Proceedings of geopolymer’88. Compiegne, France, 1–3, June 1988.
11. Davidovits, J. (1988). Geopolymers of the first generation: SILIFACEProcess. In: J. Davidovits, & J. Orlinski (Eds.), Proceedings of the 1st international conference on geopolymer ’88, Vol. 1, Compiegne, France.
12. Davidovits, J. (1991). Geopolymers: Inorganic polymeric new materials. Journal of Thermal Analysis,37, 1633–1656.10.1007/BF01912193 ↗
13. Davidovits, J. (1994). Geopolymers: Inorganic polymeric new materials. Journal of Materials Education,16, 91–139.
14. Davidovits, J. (1999). Geopolymeric reactions in the economic future of cements and concretes: world-wide mitigation of carbon dioxide emission. In: J. Davidovits, R. Davidovits, & C. James (Eds.), Proceedings of the 2nd international conference on geopolymer’99. Saint Qunentin, France, June 30–July 2, pp. 111–121.
15. De Silva, P., Sagoe-Crenstil, K., & Sirivivatnanon, V. (2007). Kinetics of geopolymerization: Role of Al2O3 and SiO2. Cement and Concrete Research,37, 512–518.10.1016/j.cemconres.2007.01.003 ↗
16. Drud, A. (2010). CONOPT user guide. Bagsvaerd, Denmark: ARKI Consulting and Development A/S. http://www.gams.com/dd/docs/solvers/conopt.pdf . Last Accessed 14th August 2013.
17. Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005). Effect of alkali cations on aluminium incorporation in geopolymeric gels. Industrial and Engineering Chemistry Research,44, 832–839.10.1021/ie0494216 ↗
18. Famy, C., Brough, A. R., & Taylor, H. F. W. (2003). The C-S-H gel of Portland cement mortars: Part I. The interpretation of energy-dispersive X-ray microanalyses from scanning electron microscopy, with some observations on C-S-H, AFm and AFt phase compositions. Cement and Concrete Research,23, 1389–1398.10.1016/S0008-8846(03)00064-4 ↗
19. Feng, X., Garboczi, E. J., Bentz, D. P., Stutzman, P. E., & Mason, T. O. (2004). Estimation of the degree of hydration of blended cement pastes by a scanning electron microscopy point-count procedure. Cement and Concrete Research,34(10), 1787–1793.10.1016/j.cemconres.2004.01.014 ↗
20. Fernandez-Jimenez, A., de la Torre, A. G., Palomo, A., Lopez-Olmo, G., Alonso, M. M., & Aranda, M. A. G. (2006). Quantitative determination of phases in the alkaline activation of fly ash. Part II: Degree of reaction. Fuel,85, 1960–1969.10.1016/j.fuel.2006.04.006 ↗
21. Fernandez-Jimenez, A., & Puertas, F. (1997). Alkali-activated slag cements: Kinetic studies. Cement and Concrete Research,27(3), 359–368.10.1016/S0008-8846(97)00040-9 ↗
22. Kamhangrittirong, P., Suwanvitaya, P., Suwanvitaya, P., & Chindaprasirt, P. (2007). Green binder technology development using fly ash based geopolymer. JSPS-DOST international symposium on environmental engineering, symposium on harmonizing infrastructure development with the environment, Phillipines.
23. Kar, A., Halabe, U. B., Ray, I., & Unnikrishnan, A. (2013). Nondestructive characterizations of alkali activated fly ash and/or slag concrete. European Scientific Journal,9(24), 52–74.
24. Kar, A., Ray, I., Unnikrishnan, A., & Davalos, J. F. (2012a). Estimation of C-S-H and calcium hydroxide for cement pastes containing slag and silica fume. Construction and Building Materials,30, 505–515.10.1016/j.conbuildmat.2011.12.029 ↗
25. Kar, A., Ray, I., Unnikrishnan, A., & Davalos, J. F. (2012b). Microanalysis and optimization-based estimation of C-SH contents of cementitious systems containing fly ash and silica fume. Cement & Concrete Composites,34, 419–429.10.1016/j.cemconcomp.2011.09.008 ↗
26. Kupwade-Patil, K., & Allouche, E. (2011). Effect of alkali silica reaction (ASR) in Geopolymer Concrete. World of Coal Ash (WOCA) conference, May 9–12, Devnver, CO, USA.
27. Lee, W. K. W., & van Deventer, J. S. J. (2002). Effects of anions on the formation of aluminosilicate gel in geopolymers. Industrial and Engineering Chemistry Research,41(18), 4550–4558.10.1021/ie0109410 ↗
28. Lloyd, R. R., Provis, J. L., & van Deventer, J. S. J. (2009). Microscopy and microanalysis of inorganic polymer cements. 2: The gel binder. Journal of Materials Science,44(2), 620–631.10.1007/s10853-008-3078-z ↗
29. Muzek, M. N., Zelic, J., & Jozic, D. (2012). Microstructural characteristics of geopolymers based on alkali-activated fly ash. Chemical and Biochemical Engineering Quarterly,26(2), 89–95.
30. Provis, J. L., & van Deventer, J. S. J. (2009). Geopolymers: Structure, processing, properties and industrial applications. Oxford: Woodhead; Boca Raton, FL: CRC Press.10.1533/9781845696382 ↗
31. Rees, C. A. (2007). Mechanisms and kinetics of gel formation in geopolymers. Ph.D. Thesis submitted to the Department of Chemical and Biomolecular Engineering, University of Melbourne.
32. Rees, C., Lukey, G. C., & Van Deventer, J. S. J. (2004). The role of solid silicates on the formation of geopolymers derived from coal ash. International symposium of research students on material science and engineering, December 20–22, Chennai, India, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras.
33. Rosenthal, R. E. (2008). GAMS—A user guide. Washington DC: Gams Development Corporation.
34. Sakulich, A. R. (2009). Characterization of environmentally-friendly alkali activated slag cements and ancient building materials. Ph.D. Thesis, Drexel University, Philadelphia, PA.
35. Shi, C., Krivenko, P., & Roy, M. (2006). Alkali-activated cements and concretes. London: Taylor & Francis.10.4324/9780203390672 ↗
36. Skvara, F., Kopecky, L., Nemecek, J., & Bittnar, Z. (2006). Microstructure of geopolymer materials based on fly ash. Cermaics—Silikaty, 50, 208–215.
37. Smilauer, V., Hlavacek, P., Skvara, F., Sulc, R., Kopecky, L., & Nemecek, J. (2011). Micromechanical multiscale model for alkali activation of fly ash and metakaolin. Journal of Materials Science. doi: 10.1007/s10853-011-5601-x .10.1007/s10853-011-5601-x ↗
38. Smith, J. W., & Comrie, D. C. (1988). Geopolymeric building materials in third world countries. In: J. Davidovits & J. Orlinski (Eds.), Proceedings of the 1st international conference of geopolymer’88, Vol. 1, Compiegne, France, 1–3 June, pp. 89–92.
39. Talling, B., & Brandstetr, J. (1995). Clinker-free concrete based on alkali activated slag. In S. L. Sarkar & S. N. Ghosh (Eds.), Progress in cement and concrete: Mineral admixtures in cement and concrete. New Delhi, India: Akademia Books International.
40. Taylor, H. F. W. (1997). Cement Chemistry (2nd ed.). Thomas Telford.10.1680/cc.25929 ↗
41. Van Jaarsveld, J. G. S. (2000). The physical and chemical characterisation of fly ash based geopolymers. PhD Thesis, Department of Chemical Engineering, University of Melbourne, Australia.