Numerical Simulation Study on the Seismic Performance of Prefabricated Fiber-Reinforced Concrete Beam–Column Joints With Grouted Sleeve Connections
Source abstract
Abstract
Abstract Based on the available experimental data, fiber models for four prefabricated fiber-reinforced concrete beam–column joint specimens with grouted sleeve connections are first developed in OpenSees software. Then, the simulated seismic performance of the specimens is compared with the experimental results. Finally, the effects of axial load ratio and shear-to-span ratio on the seismic performance of the specimens are further investigated numerically. The results indicate that Concrete02 material model and Reinforcing Steel material model can accurately simulate the constitutive relationship of concrete and reinforcing steel, respectively; the beam–column joint elements can accurately simulate different damage behaviors of the joint zone. Fiber-reinforced concrete can significantly improve the seismic performance of the specimens. The relative errors of the simulated seismic performance indexes are about 15%. It is recommended that the optimum value of shear-to-span ratio for prefabricated FRC BCJs is 2.0–2.5. The effect of axial load ratio on the seismic behavior of PBCJs-CM is very small, and can be negligible in the case that the prefabricated FRC BCJs has a moderate value of shear-to-span ratio. The fiber model developed in this article can provide a numerical simulation basis for subsequent studies of prefabricated fiber-reinforced concrete beam–column joint specimens with grouted sleeve connections.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Cao, W. L., Liu, X., Liu, Q. Y., Tian, Z., & Lin, D. C. (2016). Experimental study on bond slip behavior of ordinary and high strength recycled concrete and steel bars. Journal of Building Structures, 37(S2), 127–134.
2. Chang GA, Mander JB. (1994). Seismic energy based fatigue damage analysis of bridge columns: Part 1: Evaluation of seismic capacity. Technical Report, 1994.
3. Coffin, L. F., Jr. (1954). A study of the effects of cyclic thermal stresses on a ductile metal. Technical Report Archive and Image Library, 76, 931–950.
4. Culmo, M. P., Marsh, L., Stanton, J., & Mertz, D. (2018). Recommended AASHTO guide specifications for ABC design and construction. Washington, D.C: Transportation Research Board.10.17226/25034 ↗
5. Dangwal, S., & Singh, H. (2023). Seismic performance of corroded non-seismically and seismically detailed RC beam-column joints rehabilitated with High Strength Fiber Reinforced Concrete. Engineering Structures, 291, 116481.10.1016/j.engstruct.2023.116481 ↗
6. Eligehausen, R., Popov, E. P., & Bertero, V. V. (1982). Local bond stress-slip relationships of deformed bars under generalized excitations. EERC Report. Berkeley: University of California.
7. Fischer, G., & Li, V. C. (2002). Effect of matrix ductility on deformation behavior of steel-reinforced ECC flexural members under reversed cyclic loading conditions. ACI Structural Journal, 99(6), 781–790.
8. Gencturk, B., Elnashai, A. S., Lepech, M. D., & Billington, S. (2013). Behavior of concrete and ECC structures under simulated earthquake motion. Journal of Structural Engineering, 139(3), 389–399.10.1061/(ASCE)ST.1943-541X.0000667 ↗
9. Girgin, S. C., Misir, I. S., & Kahraman, S. (2017). Experimental cyclic behavior of prefabricated hybrid beam-column connections with welded components. International Journal of Concrete Structures and Materials, 11(2), 229–245.10.1007/s40069-017-0190-y ↗
10. Gomes, A., & Appleton, J. (1997). Nonlinear cyclic stress-strain relationship of reinforcing bars including bucking. Engineering Structures, 19(10), 822–826.10.1016/S0141-0296(97)00166-1 ↗
11. Guan, D., Guo, Z., Xiao, Q., & Zheng, Y. (2019). Experimental study of a new beam-column connection for prefabricated concrete frames under reversal cyclic loading. Advances in Structural Engineering, 19(3), 529–545.10.1177/1369433216630122 ↗
12. Gul, M. A. A., Khan, S. W., Ishag, M., Khan, F. A., Shahzada, K., & Gul, M. S. A. (2023). Structural behaviour of RC-ECC beam-column connections under quasi-static loading. Materials Today Communications, 35, 105763.10.1016/j.mtcomm.2023.105763 ↗
13. Hawkins, N. M., Lin, I. J., & Jeang, F. L. (1982). Local bond strength of concrete for cyclic reversed loadings. In P. Bartos (Ed.), Bond in Concrete (pp. 151–161). London: Applied Science Publishers Ltd.
14. Kurama, Y. C., Sritharan, S., Fleischman, R. B., Restrepo, J. I., Henry, R. S., Cleland, N. M., et al. (2018). Seismic-resistant prefabricated concrete structures: State of the art. Journal of Structural Engineering, 144(4), 03118001.10.1061/(ASCE)ST.1943-541X.0001972 ↗
15. Li, D.-b, Chai, Y.-k, Li, W.-l, & Xiang, R. (2022). Xiang. Experimental study and finite element analysis of seismic behaviour of novel prefabricated prestressed concrete frames. Structure, 38, 402–415.10.1016/j.istruc.2022.02.019 ↗
16. Lowes, L. N., & Altoontash, A. (2003). Modeling reinforced concrete beam-column joints subjected to cyclic loading. Journal of Structural Engineering, 129(12), 1686–1697.10.1061/(ASCE)0733-9445(2003)129:12(1686) ↗
17. Maekawa, K., & Dhakal, R. P. (2002). Modeling for Postyield buckling of reinforcement. Journal of Structural Engineering, 128(9), 1139–1147.10.1061/(ASCE)0733-9445(2002)128:9(1139) ↗
18. Manson, S. S. (1953). Behavior of materials under conditions of thermal stress. Technical Report Archive and Image Library, s3–4, 661–665.
19. Ministry of Housing and Urban-Rural Development of Jiangsu Province. Technical specification for assembled monolithic concrete structure: DBJ61/T 87–2014. (2014). China Building Materials Industry Press, Nanjing.
20. Ministry of Housing and Urban-Rural Development of Jiangsu Province. (2017). Technical specification for framed structures comprised of prefabricated concrete components: DGJ32/TJ219-2017. Jiangsu Phoenix Science and Technology Publishing House.
21. Mitra, N. (2007). An analytical study of reinforced concrete beam-column joint behavior under seismic loading. University of Washington.
22. MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2014a). Technical specification for prefabricated concrete structures: JGJ 1–2014. China Architecture & Building Press.
23. MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2014b). Technical specification for framed structures comprised of prefabricated prestressed concrete components: JGJ 224–2010. China Architecture & Building Press.
24. Nadir, W., Ali, A. Y., & Kadhim, M. M. (2021). Structural behavior of hybrid reinforced concrete beam-column joints under cyclic load: State of the art review. Case Studies in Construction Materials, 15, e00707.10.1016/j.cscm.2021.e00707 ↗
25. Noushini, A., Samali, B., & Vessalas, K. (2013). Effect of polyvinyl alcohol (PVA) fiber on dynamic and material properties of fiber reinforced concrete. Construction and Building Materials, 49(2), 374–383.10.1016/j.conbuildmat.2013.08.035 ↗
26. Noushini, A., Samali, B., & Vessalas, K. (2015). Ductility and damping characteristics of polyvinyl-alcohol fiber reinforced concrete beam elements. Advances in Structural Engineering, 18(11), 1763–1788.10.1260/1369-4332.18.11.1763 ↗
27. Pantazopoulou, S. J., & Bonacci, J. F. (1994). On earthquake-resistant reinforced concrete frame connections. Canadian Journal of Civil Engineering, 21(2), 307–328.10.1139/l94-032 ↗
28. Parastesh, H., Hajiarasouliha, I., & Ramezani, R. (2014). A new ductile moment-restoring connection for prefabricated concrete frames in seismic regions: An experimental investigation. Engineering Structures, 70, 144–157.10.1016/j.engstruct.2014.04.001 ↗
29. Park, R. (1989). Valuation of ductility of structures and structural assemblages from laboratory testing. Bulletin of the New Zealand National Society for Earthquake Engineering, 22(3), 155–166.10.5459/bnzsee.22.3.155-166 ↗
30. Parra-Montesinos, G. J., & Chompreda, P. (2017). Deformation capacity and shear strength of fiber-reinforced cement composite flexural members subjected to displacement reversals. Journal of Structural Engineering, 133(3), 421–431.10.1061/(ASCE)0733-9445(2007)133:3(421) ↗
31. Paudel, S., Tanapornraweekit, G., & Tangtermsirikul, S. (2022). Numerical study on seismic performance improvement of composite wide beam-column interior joints. Journal of Building Engineering, 46, 103637.10.1016/j.jobe.2021.103637 ↗
32. Paulay, T. (1989). Equilibrium criteria for reinforced concrete beam-column joints. ACI Structural Journal, 86(6), 635–643.
33. Qian, H., Wang, X. Y., Xu, L., & Zhang, Y. Y. (2023). Experimental study on re-centering behavior and energy dissipation capacity of prefabricated concrete frame joints with shape memory alloy bars and engineered cementitious composites. Engineering Structures, 277, 115394.10.1016/j.engstruct.2022.115394 ↗
34. Saghafi, M. H., Golafshar, A., Zareian, M. S., & Mehri, A. H. (2021). Application of HPFRCC in beam-column joints to reduce transverse reinforcements. Structures, 31, 805–814.10.1016/j.istruc.2021.02.032 ↗
35. Said, S. H., & Razak, H. A. (2016). Structural behavior of RC engineered cementitious composite(ECC) exterior beam-column joints under reversed cyclic loading. Construction & Building Materials, 107, 226–234.10.1016/j.conbuildmat.2016.01.001 ↗
36. Scott, B. D., Park, R., & Priestley, M. J. (1982). Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rate. Journal of the American Concrete Institute, 70(1), 13–27.
37. Sun, C. Z., Zhuang, M. L., Bai, L. T., Gao, L., Yu, C. R., Yang, J., Zhu, H. B., Qiao, Y., Shao, Y. F., & Zhang, W. H. (2023b). Experimental study on seismic behavior of novel precast concrete beam-column joints using mechanical connections. Bulletin of Earthquake Engineering, 21, 4429–4448.10.1007/s10518-023-01688-w ↗
38. Sun, C. Z., Zhuang, M. L., Wang, Z. B., Chen, B. D., Gao, L., Qiao, Y., Zhu, H. B., Zhang, W. H., Yang, J., & Yu, C. R. (2023a). Experimental investigation on the seismic performance of prefabricated fiber-reinforced concrete beam-column joints using grouted sleeve connections. Structural Concrete. https://doi.org/10.1002/suco.20220082310.1002/suco.202200823 ↗
39. Suryanto, B., Tambusay, A., Suprobo, P., Bregoli, G., & Aitken, M. W. (2022). Seismic performance of exterior beam-column joints constructed with engineered cementitious composite: Comparison with ordinary and steel fibre reinforced concrete. Engineering Structures, 250, 113377.10.1016/j.engstruct.2021.113377 ↗
40. Xia, J., Chen, J. J., Shan, K. S., & Wu, Y. F. (2023). Seismic performance of corroded prefabricated column-footing joint with grouted splice sleeve connection: Experiment and simulation. Journal of Building Engineering, 80, 108112.10.1016/j.jobe.2023.108112 ↗
41. Xia, J., Gan, R. L., Fang, Y., Zhao, Y. X., & Jin, W. L. (2020). Experimental study on direct shear performance of concrete-concrete interface of prefabricated structure sleeve grouting connection. Journal of Zhejiang University (engineering Science), 54(3), 491–499.
42. Xue, W., Hu, X., & Song, J. (2021). Experimental study on seismic behavior of prefabricated concrete beam-column joints using UHPC-based connections. Structures, 34, 4867–4881.10.1016/j.istruc.2021.10.067 ↗
43. Zhang, T. Y., Zhao, B. G., Li, R. G., & Du, X. Y. (2016). Monotonic and low cycle fatigue testing and research for HRB400 Steel. Engineering Mechanics, 33(4), 121–129.
44. Zhao, J., & Sritharan, S. (2007). Modeling of Strain penetration effects in fiber-based analysis of reinforced concrete structures. ACI Structural Journal, 104(2), 133–141.
45. Zhuang, M. L., Sun, C. Z., & Dong, B. (2022b). Experimental and numerical investigations on seismic performance of HTRB630 high-strength steel bars reinforced concrete columns. Case Studies in Construction Materials, 17, e01185.10.1016/j.cscm.2022.e01185 ↗
46. Zhuang, M. L., Sun, C. Z., Gao, L., Qiao, Y., Chen, J., Zhang, W. H., & Ma, Y. S. (2022a). Investigation on drift ratio limits of PVA fiber reinforced concrete columns under different performance levels based on the Kunnath damage model. Case Studies in Construction Materials, 17, e01403.10.1016/j.cscm.2022.e01403 ↗