Numerical Analysis of Shear Contribution of CFRP-Strengthened RC Beams by Different Bond-Slip Models
Source abstract
Abstract
Abstract During a numerical investigation conducted using ABAQUS software, various bond-slip models for the FRP–concrete interface were evaluated to accurately predict the shear contribution of FRP in strengthening reinforced concrete (RC) beams. Three established bond-slip models were chosen to develop finite element analysis models for the four FRP-strengthened beams. The outcomes of these numerical simulations were subsequently compared with experimental data. The results demonstrated a strong correlation between the finite element simulations and the experimental tests, particularly regarding the failure process and shear capacity of the reinforced beams. The increase in shear capacity observed during testing varied from 13.5% to 42.9%. In contrast, the corresponding increase in shear capacity predicted by the finite element simulations ranged from 5.5% to 47.7%. The discrepancy in CFRP shear contribution among beams with different bond-slip relationships, under identical reinforcement configurations, was observed to be within the range of 0.1% to 15.9%. The numerical results of the Nakaba model showed a higher level of safety; however, the simulation performance of the Lu model was regarded as more effective and better suited for numerical analysis in predicting the shear contribution of FRP in strengthened RC beams.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Askar RaA, Abd-Alkhalek M. (2012). Response of RC box girders strengthened using cfrp sheets. Journal of American Science, 8(12).
2. Beber A, Campos Filho A. (2005). CFRP composites on the shear strengthening of reinforced concrete beams. Revista IBRACON de Estruturas, 1(2).
3. Chaallal, O., Nollet, M.-J., & Perraton, D. (1998). Shear strengthening of RC beams by externally bonded side CFRP strips. Journal of Composites for Construction, 2(2), 111–113.10.1061/(ASCE)1090-0268(1998)2:2(111) ↗
4. Chen, J., & Teng, J. (2003). Shear capacity of FRP-strengthened RC beams: FRP debonding. Construction and Building Materials, 17(1), 27–41.10.1016/S0950-0618(02)00091-0 ↗
5. China TDOTPSRO. Specifications for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts (JTG 3362–2018).
6. Ding, F. X., Ying, X. Y., & Yu, Z. W. (2010). Unified calculation method of uniaxial mechanical properties of lightweight aggregate concrete. Journal of Central South University (Science and Technology), 41(5), 1973–1979.
7. Ding, F. X., Ying, X. Y., Zhou, L. C., & Yu, Z. W. (2011). Unified calculation method and its application in determining the uniaxial mechanical properties of concrete. Frontiers of Architecture and Civil Engineering in China, 5(3), 381–393. https://doi.org/10.1007/s11709-011-0118-610.1007/s11709-011-0118-6 ↗
8. Dong, J., Wang, Q., & Guan, Z. (2013). Structural behaviour of RC beams with external flexural and flexural–shear strengthening by FRP sheets. Composites Part B: Engineering, 44(1), 604–612. https://doi.org/10.1016/j.compositesb.2012.02.01810.1016/j.compositesb.2012.02.018 ↗
9. Haddad, R. H., Al-Rousan, R. Z., & Al-Sedyiri, B. K. (2013). Repair of shear-deficient and sulfate-damaged reinforced concrete beams using FRP composites. Engineering Structures, 56, 228–238. https://doi.org/10.1016/j.engstruct.2013.05.00710.1016/j.engstruct.2013.05.007 ↗
10. Islam, M. R., Mansur, M. A., & Maalej, M. (2005). Shear strengthening of RC deep beams using externally bonded FRP systems. Cement and Concrete Composites, 27(3), 413–420. https://doi.org/10.1016/j.cemconcomp.2004.04.00210.1016/j.cemconcomp.2004.04.002 ↗
11. Jahangir, H., & Esfahani, M. R. (2018). Numerical study of bond – slip mechanism in advanced externally bonded strengthening composites. KSCE Journal of Civil Engineering, 22(11), 4509–4518. https://doi.org/10.1007/s12205-018-1662-610.1007/s12205-018-1662-6 ↗
12. JTG 3362–2018, Specifications for design of highway reinforced concrete and prestressed concrete bridges and culverts.
13. Khalifa, A., & Nanni, A. (2000). Improving shear capacity of existing RC T-section beams using CFRP composites. Cement and Concrete Composites, 22(3), 165–174. https://doi.org/10.1016/S0958-9465(99)00051-710.1016/S0958-9465(99)00051-7 ↗
14. Lee, T. K., & Al-Mahaidi, R. (2008). An experimental investigation on shear behaviour of RC T-beams strengthened with CFRP using photogrammetry. Composite Structures, 82(2), 185–193. https://doi.org/10.1016/j.compstruct.2006.12.01210.1016/j.compstruct.2006.12.012 ↗
15. Lee, D. H., Han, S.-J., Kim, K. S., et al. (2017). Shear strength of reinforced concrete beams strengthened in shear using externally-bonded FRP composites. Composite Structures, 173, 177–187. https://doi.org/10.1016/j.compstruct.2017.04.02510.1016/j.compstruct.2017.04.025 ↗
16. Li, K., Cao, S., Yang, Y., et al. (2018). Bond-slip relationship for CFRP sheets externally bonded to concrete under cyclic loading. Materials, 11(3), 336.10.3390/ma11030336 ↗
17. Lin, X., & Zhang, Y. X. (2013). Bond–slip behaviour of FRP-reinforced concrete beams. Construction and Building Materials, 44, 110–117. https://doi.org/10.1016/j.conbuildmat.2013.03.02310.1016/j.conbuildmat.2013.03.023 ↗
18. Lu, X. Z., Teng, J. G., Ye, L. P., et al. (2005). Bond–slip models for FRP sheets/plates bonded to concrete. Engineering Structures, 27(6), 920–937. https://doi.org/10.1016/j.engstruct.2005.01.01410.1016/j.engstruct.2005.01.014 ↗
19. Ma, S., Muhamad Bunnori, N., Choong, K. K., et al. (2019). Models reviewed for predicting CFRP shear contribution of strengthened reinforced concrete box beam. KSCE Journal of Civil Engineering, 23(8), 3644–3659. https://doi.org/10.1007/s12205-019-1850-z10.1007/s12205-019-1850-z ↗
20. Monti G, Renzelli M, Luciani P. (2003). FRP adhesion in uncracked and cracked concrete zones.10.1142/9789812704863_0015 ↗
21. Moradi, E., Naderpour, H., & Kheyroddin, A. (2020). An experimental approach for shear strengthening of RC beams using a proposed technique by embedded through-section FRP sheets. Composite Structures, 238, 111988. https://doi.org/10.1016/j.compstruct.2020.11198810.1016/j.compstruct.2020.111988 ↗
22. Nakaba, K., Kanakubo, T., Furuta, T., & Hiroyuki, Y. (2001). Bond behavior between fiber-reinforced polymer laminates and concrete. ACI Structural Journal. https://doi.org/10.14359/1022410.14359/10224 ↗
23. Nelson, A. L., Al-Allaf, M., & Weekes, L. (2020). Analytical modelling of bond-slip failure between epoxy bonded FRP and concrete substrate. Composite Structures. https://doi.org/10.1016/j.compstruct.2020.11259610.1016/j.compstruct.2020.112596 ↗
24. Panigrahi, A. K., Biswal, K., & Barik, M. (2014). Strengthening of shear deficient RC T-beams with externally bonded GFRP sheets. Construction and Building Materials, 57, 81–91.10.1016/j.conbuildmat.2014.01.076 ↗
25. Pellegrino, C., & Modena, C. (2006). Fiber-reinforced polymer shear strengthening of reinforced concrete beams: experimental study and analytical modeling. ACI Structural Journal, 103(5), 720.
26. Pellegrino, C., & Modena, C. (2008). An experimentally based analytical model for the shear capacity of FRP-strengthened reinforced concrete beams. Mechanics of Composite Materials, 44(3), 231–244.10.1007/s11029-008-9016-y ↗
27. Sayed, A. M., & Wang, XWu. Z. (2014). Finite element modeling of the shear capacity of RC beams strengthened with FRP sheets by considering different failure modes. Construction and Building Materials, 59, 169–179. https://doi.org/10.1016/j.conbuildmat.2014.02.04410.1016/j.conbuildmat.2014.02.044 ↗
28. Teng, J. G., Chen, J. F., Smith, S. T., et al. (2003). Behaviour and strength of FRP-strengthened RC structures: A state-of-the-art review. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 156(1), 51–62. https://doi.org/10.1680/stbu.2003.156.1.5110.1680/stbu.2003.156.1.51 ↗
29. Triantafillou, T. C., & Plevris, N. (1992). Strengthening of RC beams with epoxy-bonded fibre-composite materials. Materials and Structures, 25(4), 201–211. https://doi.org/10.1007/BF0247306410.1007/BF02473064 ↗
30. Zhi-Wu, Y. (2010). Unified calculation method of uniaxial mechanical properties of lightweight aggregate concrete. Journal of Central South University, 41(5), 1937.
31. Zhou, Y., Guo, M., Sui, L., et al. (2019). Shear strength components of adjustable hybrid bonded CFRP shear-strengthened RC beams. Composites Part b: Engineering, 163, 36–51. https://doi.org/10.1016/j.compositesb.2018.11.02010.1016/j.compositesb.2018.11.020 ↗