Influence of Fe2O3 Nanoparticles on the Characteristics of Waste Marble Powder Mixed Cement Mortars
Source abstract
Abstract
Abstract Eco-friendly and durability of material has been the focuses of different researches; however, limited are considered both the nanomaterial and byproduct. Therefore, the aimed of this study is to investigate the influence of nano-Fe2O3 (NF) on various properties of cement mortar with marble powder (MP) as supplementary cementitious material (SCM). Fresh and hardened properties of each mix were examined. The microstructure of hydrated blended cement mortars was evaluated by scanning electron microscopy and X-ray energy-dispersive techniques. The effect was evaluated using flow table, compressive, split tensile, and durability tests. In general, the MP dosage mixes showed increase in water content due to high fineness and NF increased the workability and rate of hydration. The refined pores and enhanced C–S–H gel formation showing better strength with NF than MP. The mechanical properties result compared to control specimens showed that (MP + NF > NF > MP > Control). The optimal value MP and NF in cement mortar's strength and durability is 10% MP and 1% NA. The findings showed that the use of MP and NF in concrete technology as partial replacement of cement is effective and enhance the properties of cementitious composites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Alyamac, K. E., Ghafari, E., & Ince, R. (2016). Development of eco-efficient self-compacting concrete with waste marble powder using theresponse surface method. Journal of Cleaner Production, 144, 192–202.10.1016/j.jclepro.2016.12.156 ↗
2. Amer, A. A., El-Sokkary, T. M., & Abdullah, N. I. (2015). Thermal durability of OPC pastes admixed with nano iron oxide. HBRC Journal., 11(2), 299–305.10.1016/j.hbrcj.2014.04.002 ↗
3. Amin, M. S., El-Gamal, S. M. A., & Hashem, F. S. (2013). Effect of addition of nano-magnetite on the hydration characteristics of hardened Portland cement and high slag cement pastes. Journal of Thermal Analysis and Calorimetry, 112, 1253–1259. https://doi.org/10.1007/s10973-012-2663-110.1007/s10973-012-2663-1 ↗
4. Ashish, D. K. (2019). Concrete made with waste marble powder and supplementary cementitious material for sustainable development. Journal of Cleaner Production., 211, 716–729.10.1016/j.jclepro.2018.11.245 ↗
5. Ashish, D. K., & Verma, S. K. (2019a). Determination of optimum mixture design method for self-compacting concrete: Validation of method with experimental results. Construction and Building Materials, 217, 664–678.10.1016/j.conbuildmat.2019.05.034 ↗
6. Ashish, D. K., & Verma, S. K. (2019b). Cementing Efficiency of Flash and Rotary-Calcined Metakaolin in Concrete. Journal of Materials in Civil Engineering., 31, 04019307.10.1061/(ASCE)MT.1943-5533.0002953 ↗
7. Ashish, D. K., Verma, S. K., Kumar, R., & Sharma, N. (2016). Properties of concrete incorporating sand and cement withwaste marble powder. Advances in Concrete Construction, 4, 145–160.10.12989/acc.2016.4.2.145 ↗
8. Ashraf, M. A., Peng, W., Zare, Y., & Rhee, K. Y. (2018). Effects of size and aggregation/agglomeration of nanoparticles on the interfacial/interphase properties and tensile strength of polymer nanocomposites. Nanoscale Research Letters., 13(1), 214. https://doi.org/10.1186/s11671-018-2624-010.1186/s11671-018-2624-0 ↗
9. ASTM C1202–12, “Standard test method for electrical indicationof concretes ability to resist chloride ion penetration,” inProceedings of the ASTM International, West Conshohocken,PA, USA, 2012.
10. ASTM. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars; ASTMC109–16; ASTM International: West Conshohocken, PA, USA, 2015b.
11. ASTM. Standard Test Method for Flow of Hydraulic Cement Mortar; ASTMC1437–16; ASTM International: West Conshohocken, PA, USA, 2015a.
12. ASTM. Standard Test Method for Rate of Water Absorption of Masonry Mortars; ASTMC1403–15; ASTM International: West Con- shohocken, PA, USA, 2015c.
13. ASTM. Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete; ASTMC311/C311M-16; ASTM International: West Conshohocken, PA, USA, 2016.
14. ASTM. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens; ASTMC496/496M-16; ASTM Interna- tional: West Conshohocken, PA, USA, 2017.
15. Dinakar, P., Sahoo, P. K., & Sriram, G. (2013). Effect of metakaolin content on the properties of high stregnth concrete. International Journal of Concrete Structures and Materials, 7(3), 215–223.10.1007/s40069-013-0045-0 ↗
16. Feng, D., Xie, N., Gong, C., Leng, Z., Xiao, H., Li, H., & Shi, X. (2013). Portland cement paste modified by TiO2 nanoparticles: A microstructure perspective. Industrial & Engineering Chemistry Research, 52(33), 11575–11582.10.1021/ie4011595 ↗
17. Heikal, M., Zaki, M. E., & Ibrahim, S. M. (2021). Characterization, hydration, durability ofnano-Fe2O3-composite cements subjected to sulphates and chlorides media. Construction and Building Materials, 1(269), 121310.10.1016/j.conbuildmat.2020.121310 ↗
18. IS: 383, Indian Standard. (1970). “Specification for a coarse and fine aggregates from natural source for concrete”. New Delhi
19. IS 8112: Indian Standard (2013) Specification for 43 grade ordinar Portland cement, New Delhi.
20. Jo, B.-W., Kim, C.-H., Tae, G.-H., & Park, J.-B. (2007). Iron Oxide Nanoparticles Incorporated Cement Mortar Composite: Correlation between Physico-Chemical and Physico-Mechanical Properties. Construction and Building Materials, 21, 1351–1355.10.1016/j.conbuildmat.2005.12.020 ↗
21. Kawashima, S., Hou, P., Corr, D. J., & Shah, S. P. (2013). Modification of cement-basedmaterials with nanoparticles. Cement and Concrete Composites, 36, 8–15.10.1016/j.cemconcomp.2012.06.012 ↗
22. Keller, A. A., Wang, H., Zhou, D., Lenihan, H. S., Cherr, G., Cardinale, B. J., Miller, R., & Ji, Z. (2010). Environmental Science and Technology, 44, 1962–1967.10.1021/es902987d ↗
23. Khan, A. J., Qureshi, L. A., Khan, M. N. A., Gul, A., Umar, M., Manan, A., Badrashi, Y. I., Abbas, A., Javed, U., & Farooq, R. (2021). Compressive Behavior of Reinforced Concrete (RC) Columns Incorporating Multi-Walled Carbon Nanotubes and Marble Powder. Crystals, 11, 247.10.3390/cryst11030247 ↗
24. Khoshakhlagh, A., Nazari, A., & Khalaj, G. (2012). Effects of Fe2O3 Nanoparticles on Water Permeability and Strength Assessments of High Strength Self-Compacting Concrete. Journal of Materials Science & Technology., 28(1), 73–82. https://doi.org/10.1016/s1005-0302(12)60026-710.1016/s1005-0302(12)60026-7 ↗
25. Kong, D., Du, X., Wei, S., Zhang, H., Yang, Y., & Shah, S. P. (2012). Influence of nano-silicaagglomeration on microstructure and properties of the hardened cementbasedmaterials. Construction and Building Materials, 37, 707–715.10.1016/j.conbuildmat.2012.08.006 ↗
26. Kumar, V. V. P., & Prasad, D. R. (2019). Influence of supplementary cementitious materials on strength and durability characteristics of concrete. Advances in Concrete Construction, 7, 75–85.
27. Kumar, V., Singla, S., & Garg, R. (2021). Strength and microstructure correlation of binary cement blends in presence of waste marblepowder. Materials Today: Proceedings, 43, 857–862.
28. Lee, J., Lee, T., Jeong, J., & Jeong, J. (2021). Mix design optimization and environmental impact assessment of low-carbon materials containing alkali-activated slag and high CaO fly ash. Construction and Building Materials, 267, 120932.10.1016/j.conbuildmat.2020.120932 ↗
29. Li, H., Xiao, H. G., Yuan, J., & Ou, J. (2004). Microstructure of cement mortar with nano-particles. Composites Part b: Engineering, 35(2), 185–189.10.1016/S1359-8368(03)00052-0 ↗
30. Li, H., Zhang, M.-H., & Ou, J.-P. (2006). Abrasion resistance of concrete containing nano-particles for pavement. Wear, 260, 1262–1266.10.1016/j.wear.2005.08.006 ↗
31. Lovecchio, N., Shaikh, F., Rosano, M., Ceravolo, R., & Biswas, W. (2020). Environmental assessment of supplementary cementitious materials and engineered nanomaterials concrete. AIMS Environmental Science, 7(1), 13–30.10.3934/environsci.2020002 ↗
32. Maguesvari, U. M., & Sundararajan, T. (2017). Influence of fly ash and fine aggregates on the characteristics of pervious concrete. International Journal of Applied Engineering Research, 12(8), 1598–1609.
33. Nazari, A., & Riahi, S. (2011). Computer-aided design of the effects of Fe2O3 nanoparticles on split tensile strength and water permeability of high strength concrete. Materials & Design., 32(7), 3966–3979. https://doi.org/10.1016/j.matdes.2011.01.06410.1016/j.matdes.2011.01.064 ↗
34. Nazari, A., Riahi, S., Shamekhi, S., & Khademno, A. (2010). The Effects of Incorporation Fe2O3 Nanoparticles on Tensile and Flexural Strength of Concrete. The Journal of American Science, 6, 90–93.
35. Ng, D. S., Paul, S. C., Anggraini, V., Kong, S. Y., Qureshi, T. S., Rodriguez, C. R., Liu, Q. F., & Šavija, B. (2020). Influence of SiO2, TiO2 and Fe2O3 nanoparticles on the properties of fly ash blended cement mortars. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2020.11962710.1016/j.conbuildmat.2020.119627 ↗
36. Norhasri, M. M., Hamidah, M. S., & Fadzil, A. M. (2017). Applications of using nano material in concrete: A review. Construction and Building Materials, 133, 91–97. https://doi.org/10.1016/j.conbuildmat.2016.12.00510.1016/j.conbuildmat.2016.12.005 ↗
37. Oltulu, M., & Sahin, R. (2013). Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powderson compressive strengths and capillary water absorption of cement mortarcontaining fly ash: A comparative study. Energy Building, 58, 292–301.10.1016/j.enbuild.2012.12.014 ↗
38. Omar, O. M., Elhameed, G. D. A., Sherif, M. A., & Mohamadien, H. A. (2012). Influence of limestone waste as partial replacement material for sand andmarble powder in concrete properties. HBRC J., 8, 193–203. https://doi.org/10.1016/j.hbrcj.2012.10.00510.1016/j.hbrcj.2012.10.005 ↗
39. Praveenkumar, T. R., Vijayalakshmi, M. M., & Meddah, M. S. (2019). Strengths and durability performances of blended cement concrete withTiO2 nanoparticles and rice husk ash. Construction and Building Materials, 217, 343–351.10.1016/j.conbuildmat.2019.05.045 ↗
40. Sata, V., Ngohpok, C., & Chindaprasrit, P. (2016). Properties of pervious concrete containing high-calcium fly ash. Computers and Concrete: an International Journal., 17(3), 337–351. https://doi.org/10.12989/cac.2016.17.3.33710.12989/cac.2016.17.3.337 ↗
41. Shah, S. P., Hou, P., & Konsta-Gdoutos, M. S. (2016). Nano-modification of cementitiousmaterial: toward a stronger and durable concrete. Journal of Sustainable Cement-Based Materials., 5, 1–22.10.1080/21650373.2015.1086286 ↗
42. Sikora, P., Horszczaruk, E., Cendrowski, K., & Mijowska, E. (2016). The influence of nano-Fe3O4 on the microstructure and mechanical properties of cementitious composites. Nanoscale Research Letters, 11(1), 1–9.10.1186/s11671-016-1401-1 ↗
43. Singh, M., Srivastava, A., & Bhunia, D. (2017). An investigation on effect of partial replacement of cement by waste marble slurry. Construction and Building Materials, 134, 471–488. https://doi.org/10.1016/j.conbuildmat.2016.12.15510.1016/j.conbuildmat.2016.12.155 ↗
44. Soliman, N. M. (2013). Effect of using marble powder in concrete mixes on the behavior and strength of RC slabs. International Journal of Current Engineering and Technology, 3(5), 1863–1870.
45. H.-W. Song, V. Saraswathy, S. Muralidharan, C.-H. Lee, and K. Thangavel, (2009)“Corrosion performance of steel in composite concrete system admixed with chloride and various alkaline nitrites,” Corrosion Engineering Science and Technology, vol. 44, no. 6, pp. 408–415.10.1179/174327809X397848 ↗
46. Sujjavanich, S., Suwanvitaya, P., Chaysuwan, D., & Heness, G. (2017). Synergistic effect of metakaolin and fly ash on properties of concrete. Construction and Building Materials, 155, 830–837.10.1016/j.conbuildmat.2017.08.072 ↗
47. Suman, K. A., Deepankar, K. A., & Zymantas, R. (2021). Expanded glass as light-weight aggregate in concrete–A review. Journal of Cleaner Production, 313, 127848.10.1016/j.jclepro.2021.127848 ↗
48. Toubal Seghir, N., Mellas, M., Sadowski, Ł, Krolicka, A., Żak, A., & Ostrowski, K. (2019). The utilization of waste marble dust as a cement replacement in air-cured mortar. Sustainability., 11(8), 2215. https://doi.org/10.3390/su1108221510.3390/su11082215 ↗
49. Yamanel, K., Durak, U., İlkentapar, S., Atabey, İİ, Karahan, O., & Duran, C. (2019). Influence of waste marble powder as a replacement of cement on the properties of mortar. Journal of Construction, 18(2), 290–300. https://doi.org/10.7764/RDLC.18.2.29010.7764/RDLC.18.2.290 ↗
50. Zaetang, Y., Wongsa, A., & Sata, V. (2017). Chindaprasrit. Influence of Mineral Additives on the Properties of Pervious Concrete, 24, 507–515.