journal article·2019-12Open access

Prediction of Chloride Penetration Depth Rate and Diffusion Coefficient Rate of Concrete from Curing Condition Variations due to Climate Change Effect

Tae-Kyun Kim, Seung-Jai Choi, Ji-Hun Choi, Jang-Ho Jay Kim

Abstract

Recently, many countries including Korea are experiencing serious climatic events, such as heat waves, torrential rain, cold waves, heavy snowfall, and typhoons. In addition, due to the extreme climate events, the construction period of concrete structures tends to be extended, whereby increasing related economic losses. Pushing through construction projects without considering climate change results in low-quality concrete, causing poor constructions humans and consequent casualties and property damages. Moreover, exposure of concrete structures to extreme environmental conditions that involve carbonation, freezing and thawing and to chloride attack environments may reduce the durability of concrete. In the environments of carbonation and chloride attack, concrete structure cured in inadequate curing conditions develops cracks, making it easy for CO 2 and chloride to and corrode rebars and reducing durability of concrete. Also, in the environments of repeated freezing and thawing, the inadequately cured concrete develops microcracks through which water infiltrates, resulting in decline in performance. According to the study results, durability generally declines most rapidly in the chloride attack environment among various environmental types. Therefore, to address these issues and provide measures for climate change, this study investigated the effect of climate factors on strength and chloride diffusion coefficient rate of concrete structure by selecting sunlight exposure time and wind speed as the most important curing conditions among various climate factors that affect concrete performance. Regarding the analytical method of experimental results, performance based evaluation (PBE) on concrete strength and durability using Satisfaction Curve is proposed. In addition, the PBEs used in this study are applied to future climate scenarios. It is expected that the optimal mix ratio accounting for climatic change in concrete mixing can be derived using the future climate change scenario.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Alqam, M., & Alkam, M. K. (2014). Temperature and moisture distribution inside a circular concrete column during the early stages of hydration. Canadian Journal of Civil Engineering, 41(6), 556–568.10.1139/cjce-2013-0052 ↗
2. Arribas, I., Vegas, I., San-Jose, J. T., & Manso, J. M. (2014). Durability studies on steelmaking slag concretes. Materials and Design, 63, 168–176.10.1016/j.matdes.2014.06.002 ↗
3. Chen, Z. T., Li, M. G., Yang, Y. Z., & Liu, Q. (2014). Restrained shrinkage behavior of concrete under different environmental conditions. Advanced Materials Research, 941(2), 835–841.10.4028/www.scientific.net/AMR.941-944.835 ↗
4. Dhir, R. K., & Jones, M. R. (1999). Development of chloride-resisting concrete using fly ash. Fuel, 78(2), 137–142.10.1016/S0016-2361(98)00149-5 ↗
5. Divsholi, B. S., Lim, T. Y. D., & Teng, S. (2014). Durability properties and microstructure of ground granulated blast furnace slag cement concrete. International Journal of Concrete Structures and Materials, 8(2), 157–164.10.1007/s40069-013-0063-y ↗
6. ElSafty, A., & Abdel-Mohti, A. (2013). Investigation of likelihood of cracking in reinforced concrete bridge decks. International Journal of Concrete Structures and Materials, 7(1), 79–93.10.1007/s40069-013-0034-3 ↗
7. Jang, S. Y., Kim, B. S., & Oh, B. H. (2011). Effect of crack width on chloride diffusion coefficients of concrete by steady-state migration tests. Cement and Concrete Research, 41(1), 9–19.10.1016/j.cemconres.2010.08.018 ↗
8. Kato, E., Kato, Y., & Uomoto, T. (2005). Development of simulation model of chloride ion transportation in cracked concrete. Journal of Advanced Concrete Technology, 3(1), 85–94.10.3151/jact.3.85 ↗
9. Kim, J. H. J., Phan, D. H., Kim, B. Y., Choi, J. W., & Han, D. S. (2012). Development of satisfaction curves to evaluate concrete mix design performance using a Bayesian probabilistic method. Construction and Building Materials, 27(1), 578–584.10.1016/j.conbuildmat.2011.07.005 ↗
10. Kim, J. H. J., Phan, H. D., Yi, N. H., Kim, S. B., & Jeong, H. S. (2011). Application of the one parameter Bayesian method as the PBMD for concrete mix proportion design. Magazine of Concrete Research, 63(1), 31–47.10.1680/macr.2011.63.1.31 ↗
11. Kim, T. K., Choi, S. J., Kim, J. H. J., & Kim, B. Y. (2015). Performance based evaluation of concrete strength under various curing conditions to investigate climate change effects. Journal of the MDPI Sustainability, 7(8), 10052–10077.10.3390/su70810052 ↗
12. Kim, T. S., Jung, S. H., Choi, Y. C., & Song, H. W. (2009). An experimental study on relation between chloride diffusivity and microstructural characteristics for GGBS concrete. Journal of the Korea Concrete Institute, 21(5), 639–647.10.4334/JKCI.2009.21.5.639 ↗
13. Kim, T. K., Shin, J. H., Bae, D. H., & Kim, J. H. J. (2014). Performance based evaluation of concrete material properties from climate change effect on wind speed and sunlight exposure time curing condition. Journal of the Korea Concrete Institute, 26(6), 751–759.10.4334/JKCI.2014.26.6.751 ↗
14. KMA, Korea Meteorological Administration. (2008). Understanding of climate change and climate change scenarios use. 2008
15. Kwon, W. T. (2005). Current status and perspectives of climate change sciences. Journal of Atmospheric Sciences, 41(1), 325–336.
16. Lee, D. G., Kim, M. Y., Yang, E. I., Yi, S. T., & Han, S. H. (2006). Comparison of high-durability materials for prevention of corrosion in marine concrete structures. Proceedings Journal of the Korea Concrete Institute, 18(2), 581–584.
17. Leng, F., Feng, N., & Lu, X. (2000). An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete. Cement and Concrete Research, 30(6), 989–992.10.1016/S0008-8846(00)00250-7 ↗
18. Luping, T., & Nilsson, L. O. (1992). Rapid determination of the chloride diffusivity in concrete by applying an electrical field. ACI Materials Journal, 89(1), 49–53.
19. Mangat, P. S., & Gurusamy, K. (1987). Chloride diffusion in steel fibre reinforced marine concrete. Cement and Concrete Research, 17(3), 385–396.10.1016/0008-8846(87)90002-0 ↗
20. Morga, M., & Marano, G. C. (2015). Chloride penetration in circular concrete columns. International Journal of Concrete Structures and Materials, 9(2), 173–183.10.1007/s40069-014-0095-y ↗
21. Myong, S. J. (2009). Current assessing vulnerability to climate change of the physical infrastructure in Korea and developing adaptation strategies (pp. 174–182). Seoul: Korea Environment Institute.
22. NT Build 492. (1999). Chloride migration coefficient from non–steady state migration experiments.
23. Oh, B. H., & Jang, B. S. (2003). Chloride diffusion analysis of concrete structures considering effects of reinforcements. ACI Materials Journal, 100(2), 143–149.
24. Park, H. W., Song, H. W., Back, J. M., Woo, J. T., & Nam, J. W. (2003). An experimental study on durability evaluation of nano composite hybrid polymer type coatings applied concrete. Proceedings Journal of the Korea Concrete Institute, 15(1), 687–692.
25. Park, S. J., & Choi, Y. (2012). Influence of curing-form material on the chloride penetration of off-shore concrete. International Journal of Concrete Structures and Materials, 6(4), 251–256.10.1007/s40069-012-0026-8 ↗
26. Phan, H. D., Kim, J. H. J., Yi, N. H., You, Y. J., & Kim, J. W. (2012). Strength targeted PBMD of HSC based on one-parameter Bayesian probabilistic method. Advanced Concrete Technology, 10(4), 137–150.10.3151/jact.10.137 ↗
27. Poon, C. S., Kou, S. C., & Lam, L. (2006). Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete. Construction and Building Materials, 20(10), 858–865.10.1016/j.conbuildmat.2005.07.001 ↗
28. Ramseyer, C., & Kang, T. H. K. (2012). Post-damage repair of prestressed concrete girders. International Journal of Concrete Structures and Materials, 6(3), 199–207.10.1007/s40069-012-0019-7 ↗
29. Tang, L., & Nilsson, L. O. (1992). Rapid determination of chloride diffusivity of concrete by applying an electric field. ACI Materials, 89(1), 49–53.
30. Thomas, M. D., & Bamforth, P. B. (1999). Modelling chloride diffusion in concrete: effect of fly ash and slag. Cement and Concrete Research, 29(4), 487–495.10.1016/S0008-8846(98)00192-6 ↗
31. Weather Knowledgebase (2012) KOREA Seoul, dongjak-gu. http://www.kma.go.kr/ . Accessed 2 Mar 2012.
32. Ye, H., Fu, C., Jin, N., & Jin, X. (2015). Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition. Computers & Concrete, 15(2), 183–198.10.12989/cac.2015.15.2.183 ↗