Finite Element Modeling and Nonlinear Analysis for Seismic Assessment of Off-Diagonal Steel Braced RC Frame
Source abstract
Abstract
The geometric nonlinearity of off-diagonal bracing system (ODBS) could be a complementary system to covering and extending the nonlinearity of reinforced concrete material. Finite element modeling is performed for flexural frame, x-braced frame and the ODBS braced frame system at the initial phase. Then the different models are investigated along various analyses. According to the experimental results of flexural and x-braced frame, the verification is done. Analytical assessments are performed in according to three dimensional finite element modeling. Nonlinear static analysis is considered to obtain performance level and seismic behaviour, and then the response modification factors calculated from each model’s pushover curve. In the next phase, the evaluation of cracks observed in the finite element models, especially for RC members of all three systems is performed. The finite element assessment is performed on engendered cracks in ODBS braced frame for various time steps. The nonlinear dynamic time history analysis accomplished in different stories models for three records of Elcentro, Naghan and Tabas earthquake accelerograms. Dynamic analysis is performed after scaling accelerogram on each type of flexural frame, x-braced frame and ODBS braced frame one by one. The base-point on RC frame is considered to investigate proportional displacement under each record. Hysteresis curves are assessed along continuing this study. The equivalent viscous damping for ODBS system is estimated in according to references. Results in each section show the ODBS system has an acceptable seismic behaviour and their conclusions have been converged when the ODBS system is utilized in reinforced concrete frame.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Seismic Performance and Analysis · Structural Behavior of Reinforced Concrete · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Abou Elfath, A., & Ghobarah, A. (2000). Behaviour of reinforced concrete frames rehabilitated with concentric steel bracing. Canadian Journal of Civil Engineering,27, 433–444.10.1139/l99-092 ↗
2. ACI Committee 318 (2002). Building code requirements for reinforced concrete (ACI 318-02). Detroit, MI: American Concrete Institute.
3. Altun, F., & Birdal, F. (2012). Analytical investigation of a three-dimensional FRP-retrofitted reinforced concrete structure’s behaviour under earthquake load effect in ANSYS program. Natural Hazards and Earth System Sciences.,12, 3701–3707.10.5194/nhess-12-3701-2012 ↗
4. Amiri, G., Gh, R., et al. (2008). Evaluation of performance behaviour of reinforced concrete frame rehabilitated with coaxial steel braces. The Journal of Structure and Steel,4(4), 17–25.
5. Amiri, A., & Tabatabaei, R. (2008). Earthquake risk management strategy plan using nonparametric estimation of hazard rate. American Journal of Applied Sciences,5(5), 581–585.10.3844/ajassp.2008.581.585 ↗
6. Anam, I & Shoma, Z. N. (2011). Nonlinear properties of reinforced concrete structures, Department of Civil and Environmental Engineering, The University of Asia Pacific, tech_ bulletin n & journal.
7. ANSYS (2009&2015). ANSYS manual, ANSYS, INC, Canonsburg, PA 15317, USA.
8. ATC. (1995a). Structural response modification factors. ATC-19 Report. Applied Technology Council. Redwood City, CA, 1995.
9. ATC. (1995b). A critical review of current approaches to earthquake-resistant design. ATC-34 Report. Applied Technology Council. Redwood City, CA, 1995.
10. Badoux, M., & Jirsa, J. (1990). Steel Bracing of RC Frame for seismic retrofitting. ASCE Journal of Structural Engineering,116, 55–74.10.1061/(ASCE)0733-9445(1990)116:1(55) ↗
11. Bathe, K. J. (1996). Finite element procedures. Upper Saddle River, NJ: Prentice Hall.
12. Bazant, Z. P., & Becq-Giraudon, E. (2002). Statistical prediction of fracture parameters of concrete and implications for choice of testing standard. Cement and Concrete Research,32, 529–556.10.1016/S0008-8846(01)00723-2 ↗
13. Berberian, M., & Navai I. (1977). Naghan (chahar mahal bakhtiari-high zagros, Iran) earthquake of 6 April 1977: A preliminary field report and a seismotectonic discussion. Geological Survey Iran, 40, pp. 51–77.
14. Bozorgnia, Y., & Bertero, V. (2004). Earthquake engineering: From engineering seismology to performance-based engineering. Boca Raton, FL: CRC Press.10.1201/9780203486245 ↗
15. Bush, T. D., Wyllie, L. A., & Jirsa, J. O. (1991). Observations on two seismic strengthening schemes for concrete frames. Earthquake Spectra,7(4), 511–527.10.1193/1.1585640 ↗
16. Constantinou, M. C., Soong, T. T., & Dargush, G. F. (1998). Passive energy dissipation systems for structural design and retrofit. Monograph no. 1. Buffalo, NY: Multidisciplinary Center for Earthquake Engineering Research.
17. Cotsovos, D. M. (2013). Cracking of RC beam/column joints: Implications for the analysis of frame-type structures. Engineering Structures,52, 131–139.10.1016/j.engstruct.2013.02.018 ↗
18. El-Metwally, S., & Chen, W. F. (1988). Moment-rotation modelling of reinforced concrete beam–column connections. ACI Structural Journal,85(4), 384–394.
19. FEMA-356, & FEMA-270. (2000). Pre-standard and commentary for seismic rehabilitation of buildings. Washington, DC: Federal Emergency Federal Agency.
20. Ghaffarzadeh, H., & Maheri, M. R. (2006). Cyclic tests on the internally braced RC frames. Journal of Seismology and Earthquake Engineering (JSEE),8(2), 177–186.
21. Ghobarah, A., & Abou Elfath, A. (2001). Rehabilitation of a reinforced concrete frame using eccentric steel bracing. Engineering Structures,23, 745–755.10.1016/S0141-0296(00)00100-0 ↗
22. Gourabi, A., & Yamani, M. (2011). Active faulting and quaternary landforms deformation related to the nain fault. American Journal of Environmental Sciences,7(5), 441–447.10.3844/ajessp.2011.441.447 ↗
23. Guan, Y., Cheng, X., & Zhang, Y. (2011). Study on the earthquake disaster reduction information management system and its application. International Journal of Intelligent Systems and Applications,1, 51–57.10.5815/ijisa.2011.01.07 ↗
24. Kawamata, S., & Ohnuma, M. (1981). Strengthening effect of eccentric steel braces to existing reinforced concrete frames, In 7WCEE Conference, Proceedings of 2nd Seminar on Repair and Retrofit of Structures. Ann Arbor, MI: NSF.
25. Kent, D. C., & Park, R. (1971). Flexural members with confined concrete. Journal of the Structural Division ASCE,97, 1969–1990.10.1061/JSDEAG.0002957 ↗
26. Maheri, M. R., & Akbari, R. (2003). Seismic Behaviour factor, R, for steel x-braced and knee-braced RC building. Engineering Structures,25, 1505–1513.10.1016/S0141-0296(03)00117-2 ↗
27. Maheri, M. R., & Ghaffarzadeh, H. (2008). Connection overstrength in steel-braced RC frames. Engineering Structures,30(7), 1938–1948.10.1016/j.engstruct.2007.12.016 ↗
28. Maheri, M. R., & Hadjipour, A. (2003). Experimental investigation and design of steel brace connection to RC frame. Engineering Structures,25(13), 1707–1714.10.1016/S0141-0296(03)00162-7 ↗
29. Maheri, M. R., Kousari, R., & Razzazan, M. (2003). Pushover tests on steel X-braced and knee-braced RC frames. Engineering Structures,25(13), 1697–1705.10.1016/S0141-0296(03)00150-0 ↗
30. Maheri, M. R., & Sahebi, A. (1995a). Experimental investigation of the use steel bracing in reinforced concrete frames. In Proceedings of 2nd International Conf. on Seismology and Earthquake Eng., Tehran, Islamic Republic of Iran, Vol. 1, pp.755–784.
31. Maheri, M. R., & Sahebi, A. (1995b). Use of Steel bracing in reinforced concrete frames. Engineering Structures,9, 545–552.
32. Masri, M., & Goel, S. C. (1996). Seismic design and testing of an RC slab-column frame strengthening by steel bracing. Earthquake Spectra,12(4), 645–666.10.1193/1.1585904 ↗
33. Mastrandrea, L., & Piluso, V. (2009a). Plastic design of eccentrically braced frames, I: Moment–shear interaction. Journal of Constructional Steel Research,65(5), 1007–1014.10.1016/j.jcsr.2008.10.002 ↗
34. Mastrandrea, L., & Piluso, V. (2009b). Plastic design of eccentrically braced frames, II: Failure mode control. Journal of Constructional Steel Research,65(5), 1015–1028.10.1016/j.jcsr.2008.10.001 ↗
35. Moghaddam, H. A., & Estekanchi, H. (1994). On the characteristics of an off-diagonal bracing system. Elsevier, Journal of Constructional Steel Research,35, 361–376.10.1016/0143-974X(94)00050-R ↗
36. Moghaddam, H. A., & Estekanchi, H. (1999). Seismic behaviour of off-diagonal bracing systems. Elsevier, Journal of Constructional Steel Research,51, 177–196.10.1016/S0143-974X(99)00007-3 ↗
37. Mohyeddin, A., Helen, M., Goldsworthy, B., & Emad, F. Gad. (2013). FE modelling of RC frames with masonry infill panels under in-plane and out-of-plane loading. Engineering Structures,51, 73–87.10.1016/j.engstruct.2013.01.012 ↗
38. PEER. (2005). Strong motion database http://peer.berkeley.edu Retrieved 4 Apr 2009.
39. Providakis, C. P. (2008). Pushover analysis of base-isolated steel–concrete composite structures under near-fault excitations. Soil Dynamics and Earthquake Engineering,28(4), 293–304.10.1016/j.soildyn.2007.06.012 ↗
40. Ramin, K. (2009). Seismic investigation and numerical analysis of RC frame retrofitted by off diagonal steel bracing system (ODBS) Master science of Shiraz university (Thesis in Farsi).
41. Rastiveis, H., Samadzadegan, F., & Reinartz, P. (2013). A fuzzy decision making system for building damage map creation using high resolution satellite imagery. Natural Hazards and Earth System Sciences,13, 455–472.10.5194/nhess-13-455-2013 ↗
42. Ravi Kumar, G., Kalyanaraman, V., & Kumar, S. (2007). Behaviour of frames with non-buckling bracing under earthquakes. Journal of Constructional Steel Research, Elsevier,63, 254–262.10.1016/j.jcsr.2006.04.012 ↗
43. Razavian Amrei, S. A., Ghodrati Amiri, G., & Rezaei, D. (2011). Evaluation of horizontal seismic hazard of Naghan, Iran World Academy of Science, Engineering and Technology, Vol. 5.
44. Roeder, C., Popov, E. (1977). Inelastic behaviour of eccentrically braced steel frames under cyclic loading, Univ. of Calif. Berkeley, CA.
45. SAP2000 (ver11.0). (2010). Software and manual. Berkeley, CA: CSI: Computers and Structures Inc.
46. Scott, B. D., Park, R., & Priestley, M. J. N. (1982). Stress–strain behaviour of concrete confined by overlapping hoops at low and high strain rates. ACI Journal,79, 13–27.
47. Steidl, J. H., & Lee, Y. (2000). The SCEC phase III strong-motion database. Bulletin of the Seismological Society of America,90, S113–S135.10.1785/0120000511 ↗
48. Sugano, S., & Fujimura, M. (1980). Seismic strengthening of existing reinforced concrete building. In Proceeding of the 7th World Conference on Earthquake Eng., Turkey, Part 1, Vol. 4, pp. 449–459.
49. Tasnimi, A., & Masoumi, A. (1999). Study of the behaviour of reinforced concrete frames strengthened with steel brace. In Third international conference on seismology and seismic engineering. Tehran, Iran.
50. Taucer, F., Spacone, E., & Filippou, F. C. (1991). A fiber beam-column element for seismic response analysis of reinforced concrete structures. Berkeley, CA: Earthquake Engineering Research Center, University of California at Berkeley.
51. Uang, C. M. (1991). Establishing R (or Rw) and Cd factors for building seismic provisions. Journal of structural Engineering, ASCE,117, 19–28.10.1061/(ASCE)0733-9445(1991)117:1(19) ↗
52. Vatani Oskouei, A., & Rafi’ee, M. H. (2009). Damage modeling in reinforced concrete bending frames originated by quake and its restoration using X-bracing system. Esteghlal,28(1), 49–73.
53. Willam K.J., & Warnke E.P. (1974). Constitutive model for the triaxial behaviour of concrete. In Proceedings of the international association for bridge and structural engineering, Vol. 19, (pp. 1–30). Bergamo, Italy.
54. Yaghmaei Sabegh, S. (2011). Stochastic finite fault modeling for the 16 september 1978 Tabas, Iran, earthquake. IJE Transaction A Basics,24(1), 15–24.
55. Youssefa, M. A., Ghaffarzadehb, H., & Nehdia, M. (2007). Seismic performance of RC frames with concentric internal steel bracing. Engineering Structures,29, 1561–1568.10.1016/j.engstruct.2006.08.027 ↗