Experimental Study on Spall Resistance of Steel-Fiber Reinforced Concrete Slab Subjected to Explosion
Source abstract
Abstract
Abstract Steel-fiber reinforced concrete slabs have good blast and spall resistance. In this study, compression and splitting tensile experiments were carried out to obtain the basic quasi-static mechanical properties of the steel-fiber concrete specimens and the influence of steel-fiber parameters was revealed. In-field explosion experiments were performed to study the dynamic responses and damage modes of the steel-fiber reinforced concrete slabs. Five typical spall damage modes were observed, the distribution law of the spalling fragments was obtained, and the influence of steel-fiber shape, length, length–diameter ratio and volume percentage on the spall performance were revealed. These results will provide a basis for the application of steel-fiber reinforced concrete slabs in protective structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Fire effects on concrete materials · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Aoude, H., Dagenais, F. P., Burrell, R. P., et al. (2015). Behavior of ultra-high performance fiber reinforced concrete columns under blast loading. International Journal of Impact Engineering, 80, 185–202.10.1016/j.ijimpeng.2015.02.006 ↗
2. Behbahani HP, Nematollahi B. Steel fiber reinforced concrete: A review 2011.
3. Burrell, R. P., Aoude, H., & Saatcioglu, M. (2014). Response of SFRC columns under blast loads. Journal of Structural Engineering, 141(9), 04014209.10.1061/(ASCE)ST.1943-541X.0001186 ↗
4. Chanh, N. V. (2017). Steel fiber reinforced concrete. . Singapore: Springer Singapore.
5. Chen, H. L., Xie, W., Jiang, M. R., et al. (2015). Blast-loaded behaviors of severely damaged buried arch repaired by anchored CFRP strips. Composite Structures, 122, 92–103.10.1016/j.compstruct.2014.11.049 ↗
6. Chen, H. L., Zhou, J. N., Fan, H. L., et al. (2014). Dynamic responses of buried arch structure subjected to subsurface localized impulsive loading: Experimental study. International Journal of Impact Engineering, 65, 89–101.10.1016/j.ijimpeng.2013.11.004 ↗
7. Fang, Q., & Zhang, J. (2013). Three-dimensional modelling of steel fiber reinforced concrete material under intense dynamic loading. Construction and Building Materials, 44(7), 118–132.10.1016/j.conbuildmat.2013.02.067 ↗
8. Feng, J., Zhou, Y. Z., Wang, P., et al. (2017). Experimental research on blast-resistance of one-way concrete slabs reinforced by BFRP bars under close-in explosion. Engineering Structures, 150, 550–561.10.1016/j.engstruct.2017.07.074 ↗
9. Gunaryo, K., Heriana, H., Sitompul, MR., et al. (2020) Experimentation and numerical modeling on the response of woven glass/epoxy composite plate under blast impact loading. International Journal of Mechanical and Materials Engineering, 15(1).10.1186/s40712-020-0116-3 ↗
10. Han, D., Park, Y. J., Han, M. C., et al. (2019). Evaluation on protection performance and on-site applicability of hybrid fiber-reinforced concrete. International Journal of Concrete Structures and Materials, 13(1), 19.10.1186/s40069-018-0329-5 ↗
11. Jahami, A., Temsah, Y., & Khatib, J. (2019). The efficiency of using CFRP as a strengthening technique for reinforced concrete beams subjected to blast loading. International Journal of Advanced Structural Engineering, 11, 411–420.10.1007/s40091-019-00242-w ↗
12. Lee, D. H., Han, S. J., Kim, K. S., et al. (2017). Shear capacity of steel fiber-reinforced concrete beams. Structural Concrete, 18(2), 278–291.10.1002/suco.201600104 ↗
13. Li, J., Wu, C., Hao, H., et al. (2015a). Investigation of ultra-high performance concrete under static and blast loads. International Journal of Protective Structures, 6(2), 217–235.10.1260/2041-4196.6.2.217 ↗
14. Li, J., Wu, C., & Hao, H. (2015b). An experimental and numerical study of reinforced ultra-high performance concrete slabs under blast loads. Materials and Design, 82, 64–76.10.1016/j.matdes.2015.05.045 ↗
15. Li, J., Wu, C., Hao, H., et al. (2016). Experimental investigation of ultra-high performance concrete slabs under contact explosions. International Journal of Impact Engineering, 93, 62–75.10.1016/j.ijimpeng.2016.02.007 ↗
16. Li, J., Wu, C., Hao, H., et al. (2017). A study of concrete slabs with steel wire mesh reinforcement under close-in explosive loads. International Journal of Impact Engineering, 110, 242–254.10.1016/j.ijimpeng.2017.01.016 ↗
17. Li, N., Zhao, J. H., Li, Y., et al. (2014). Study on failure mode of steel fiber reinforced high strength concrete wall under blasting load. Advanced Materials Research, 1030–1032, 1014–1018.
18. Liu, S. F., Zhou, Y. Z., Zheng, Q., et al. (2019). Blast responses of concrete beams reinforced with steel-GFRP composite bars. Structures, 22, 200–212.10.1016/j.istruc.2019.08.010 ↗
19. Luccioni, B., Isla, F., Codina, R., et al. (2017). Effect of steel fibers on static and blast response of high strength concrete. International Journal of Impact Engineering, 107, 23–37.10.1016/j.ijimpeng.2017.04.027 ↗
20. Mao, L., Bamett, S., Begg, D., et al. (2014). Numerical simulation of ultra high performance fiber reinforced concrete panel subjected to blast loading. International Journal of Impact Engineering, 64(64), 91–100.10.1016/j.ijimpeng.2013.10.003 ↗
21. Michels, J., Christen, R., & Waldmann, D. (2013). Experimental and numerical investigation on postcracking behavior of steel fiber reinforced concrete. Engineering Fracture Mechanics, 98, 326–349.10.1016/j.engfracmech.2012.11.004 ↗
22. Nam, J., Kim, H., & Kim, G. (2017). Experimental investigation on the blast resistance of fiber-reinforced cementitious composite panels subjected to contact explosions. International Journal of Concrete Structures and Materials, 11(1), 29–43.10.1007/s40069-016-0179-y ↗
23. Nataraja, M. C., Dhang, N., & Gupta, A. P. (1999). Stress–strain curves for steel-fiber reinforced concrete under compression. Cement and Concrete Composites, 21(5–6), 383–390.10.1016/S0958-9465(99)00021-9 ↗
24. Porter, H. F. (1910). The preparation of concrete-from selection of materials to final deposition. Journal Proceedings of American Concrete Institute, 6(2), 296.
25. Pros, A., Diez, P., & Molins, C. (2012). Modeling steel fiber reinforced concrete: numerical immersed boundary approach and a phenomenological mesomodel for concrete-fiber interaction. International Journal for Numerical Methods in Engineering, 90(1), 65–86.10.1002/nme.3312 ↗
26. Rambo, D. A. S., Silva, F. D. A., & Filho, R. D. T. (2014). Mechanical behavior of hybrid steel-fiber self-consolidating concrete: Materials and structural aspects. Materials and Design, 54(2), 32–42.10.1016/j.matdes.2013.08.014 ↗
27. Saboori, A., Yazdani, S., Reberg, A., et al. (1976). Steel fiber reinforced concrete. Materials Science and Engineering, 25, 53–58.10.1016/0025-5416(76)90051-3 ↗
28. Thomas, J., & Ramaswamy, A. (2007). Mechanical properties of steel fiber-reinforced concrete. Journal of Materials in Civil Engineering, 19(5), 385–392.10.1061/(ASCE)0899-1561(2007)19:5(385) ↗
29. Tokgoz, S., & Dundar, C. (2010). Experimental study on steel tubular columns in-filled with plain and steel fiber reinforced concrete. Thin-Walled Structures, 48(6), 414–422.10.1016/j.tws.2010.01.009 ↗
30. Uygunoğlu, T. (2008). Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete. Materials and Structures, 41(8), 1441–1449.10.1617/s11527-007-9341-y ↗
31. Wanchoo, P., Matos, H., Rousseau, C. E., et al. (2021). Investigations on air and underwater blast mitigation in polymeric composite structures—a review. Composite Structures, 263, 113530.10.1016/j.compstruct.2020.113530 ↗
32. Wang, H. H., Chen, H. L., Wang, P., et al. (2019). Blast responses and damage evaluation of CFRP tubular arches. Construction and Building Materials, 196, 233–244.10.1016/j.conbuildmat.2018.11.097 ↗
33. Wang, P., Jiang, M. R., Zhou, J. N., et al. (2018). Spalling in concrete arches subjected to shock wave and CFRP strengthening effect. Tunneling and Underground Space Technology, 74, 10–19.10.1016/j.tust.2018.01.009 ↗
34. Xie, W., Jiang, M. R., Chen, H. L., et al. (2014). Experimental behaviors of CFRP cloth strengthened buried arch structure subjected to subsurface localized explosion. Composite Structures, 116, 562–570.10.1016/j.compstruct.2014.05.045 ↗
35. Xu, J., Wu, C., Xiang, H., et al. (2016). Behaviour of ultra high performance fiber reinforced concrete columns subjected to blast loading. Engineering Structures, 118, 97–107.10.1016/j.engstruct.2016.03.048 ↗
36. Yang, J. M., Yoo, D. Y., You-Chan, K., et al. (2017). Mechanical properties of steam cured high-strength steel fiber-reinforced concrete with high-volume blast furnace slag. International Journal of Concrete Structures and Materials, 11(2), 391–401.10.1007/s40069-017-0200-0 ↗
37. Yi, N. H., Kim, J. H. J., Han, T. S., et al. (2012). Blast-resistant characteristics of ultra-high strength concrete and reactive powder concrete. Construction and Building Materials, 28(1), 694–707.10.1016/j.conbuildmat.2011.09.014 ↗
38. Yoo, D. Y., & Yoon, Y. S. (2016). A review on structural behavior, design, and application of ultra-high-performance fiber-reinforced concrete. International Journal of Concrete Structures and Materials, 10(2), 125–142.10.1007/s40069-016-0143-x ↗
39. Zhang, B., He, H. G., Zhou, Q., et al. (2019). Blast responses of pultruded GFRP fluted-core sandwich panels: Testing and analyzing. Polymer Testing, 79, 106047.10.1016/j.polymertesting.2019.106047 ↗
40. Zhang, N., Zhou, J., & Ma, G. W. (2020). Dynamic properties of strain-hardening cementitious composite reinforced with basalt and steel fibers. International Journal of Concrete Structures and Materials, 14(1), 44.10.1186/s40069-020-00415-y ↗
41. Zhao, Z., Zhang, B., Zhou, J., et al. (2018). Quasi-far-field blast responses of hierarchical orthogrid-stiffened sheet molding compound (SMC) protective door structures. Engineering Structures, 168, 431–446.10.1016/j.engstruct.2018.05.001 ↗