Durability of Mortar Incorporating Ferronickel Slag Aggregate and Supplementary Cementitious Materials Subjected to Wet–Dry Cycles
Source abstract
Abstract
This paper presents the strength and durability of cement mortars using 0–100% ferronickel slag (FNS) as replacement of natural sand and 30% fly ash or ground granulated blast furnace slag (GGBFS) as cement replacement. The maximum mortar compressive strength was achieved with 50% sand replacement by FNS. Durability was evaluated by the changes in compressive strength and mass of mortar specimens after 28 cycles of alternate wetting at 23 °C and drying at 110 °C. Strength loss increased by the increase of FNS content with marginal increases in the mass loss. Though a maximum strength loss of up to 26% was observed, the values were only 3–9% for 25–100% FNS contents in the mixtures containing 30% fly ash. The XRD data showed that the pozzolanic reaction of fly ash helped to reduce the strength loss caused by wet–dry cycles. Overall, the volume of permeable voids (VPV) and performance in wet–dry cycles for 50% FNS and 30% fly ash were better than those for 100% OPC and natural sand.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Aggarwal, L. K. (1995). Bagasse-reinforced cement composites. Cement & Concrete Composites, 17(2), 107–112.10.1016/0958-9465(95)00008-Z ↗
2. Aggarwal, P., Aggarwal, Y., & Gupta, S. M. (2007). Effect of bottom ash as replacement of fine aggregates in concrete. Asian Journal of Civil Engineering, 8(1), 49–62.
3. Al-Jabri, K. S., Al-Saidy, A. H., & Taha, R. (2011). Effect of copper slag as a fine aggregate on the properties of cement mortars and concrete. Construction and Building Materials, 25(2), 933–938.10.1016/j.conbuildmat.2010.06.090 ↗
4. Al-Negheimish, A. I., & Al-Zaid, R. Z. (1997). Utilization of local steel making slag in concrete. Journal of King Saud University, 9(1), 39–55.10.1016/S1018-3639(18)30666-4 ↗
5. Andrews-Phaedonos, F. (2008, July). Test methods for the assessment of durability of concrete. In ARRB conference, 23rd, 2008, Adelaide, South Australia, Australia.
6. AS 2758.1. (1998). Aggregates and rock for engineering purposes. Standards Australia. Retrieved from, http://www.siaglobal.com .
7. ASTM C 642. (2006). Standard test method for density, absorption, and voids in hardened concrete. West Conshohocken, PA: American Society for Testing and Materials (ASTM).
8. Ayano, T., & Sakata, K. (2000). Durability of concrete with copper slag fine aggregate. Special Publication, 192, 141–158.
9. Bai, Y., Darcy, F., & Basheer, P. A. M. (2005). Strength and drying shrinkage properties of concrete containing furnace bottom ash as fine aggregate. Construction and Building Materials, 19(9), 691–697.10.1016/j.conbuildmat.2005.02.021 ↗
10. Bijen, J. (1996). Benefits of slag and fly ash. Construction and Building Materials, 10(5), 309–314.10.1016/0950-0618(95)00014-3 ↗
11. Brindha, D., & Nagan, S. (2011). Durability studies on copper slag admixed concrete. Asian Journal of Civil Engineering (Building and Housing), 12(5), 563–578.
12. Choi, Y. C., & Choi, S. (2015). Alkali–silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions. Construction and Building Materials, 99, 279–287.10.1016/j.conbuildmat.2015.09.039 ↗
13. Davis, J., Bird, J., Finlayson, B., & Scott, R. (2000). The management of gravel extraction in alluvial rivers: a case study from the Avon River, southeastern Australia. Physical Geography, 21(2), 133–154.10.1080/02723646.2000.10642703 ↗
14. Etxeberria, M., Pacheco, C., Meneses, J. M., & Berridi, I. (2010). Properties of concrete using metallurgical industrial by-products as aggregates. Construction and Building Materials, 24(9), 1594–1600.10.1016/j.conbuildmat.2010.02.034 ↗
15. Ghafoori, N., & Bucholc, J. (1996). Investigation of lignite-based bottom ash for structural concrete. Journal of Materials in Civil Engineering, 8(3), 128–137.10.1061/(ASCE)0899-1561(1996)8:3(128) ↗
16. Hooton, R. D. (2000). Canadian use of ground granulated blast-furnace slag as a supplementary cementing material for enhanced performance of concrete. Canadian Journal of Civil Engineering, 27(4), 754–760.10.1139/l00-014 ↗
17. JMIA. (1991). Research of ferronickel slag fine aggregate for concrete. Japan Mining Industry Association. Retrieved from, http://jglobal.jst.go.jp .
18. JSCE Committee. (1994). Guidelines for construction using Ferronickel slag fine aggregate concrete. Concr. Libr. JSCE. 24 Retrieved from May 20, 2015, from http://www.jsce.or.jp
19. Kang, S. S., Park, K., & Kim, D. (2014). Potential soil contamination in areas where ferronickel slag is used for reclamation work. Materials, 7(10), 7157–7172.10.3390/ma7107157 ↗
20. Kim, J. E., Park, W. S., Jang, Y. I., Kim, S. W., Kim, S. W., Nam, Y. H., et al. (2016). Mechanical properties of energy efficient concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume. International Journal of Concrete Structures and Materials, 10(3), 97–108.10.1007/s40069-016-0162-7 ↗
21. Manso, J. M., Gonzalez, J. J., & Polanco, J. A. (2004). Electric arc furnace slag in concrete. Journal of Materials in Civil Engineering, 16(6), 639–645.10.1061/(ASCE)0899-1561(2004)16:6(639) ↗
22. Manso, J. M., Polanco, J. A., Losanez, M., & González, J. J. (2006). Durability of concrete made with EAF slag as aggregate. Cement & Concrete Composites, 28(6), 528–534.10.1016/j.cemconcomp.2006.02.008 ↗
23. Maslehuddin, M., Sharif, A. M., Shameem, M., Ibrahim, M., & Barry, M. S. (2003). Comparison of properties of steel slag and crushed limestone aggregate concretes. Construction and Building Materials, 17(2), 105–112.10.1016/S0950-0618(02)00095-8 ↗
24. Osborne, G. J. (1999). Durability of Portland blast-furnace slag cement concrete. Cement & Concrete Composites, 21(1), 11–21.10.1016/S0958-9465(98)00032-8 ↗
25. Padmalal, D., Maya, K., Sreebha, S., & Sreeja, R. (2008). Environmental effects of river sand mining: a case from the river catchments of Vembanad lake, Southwest coast of India. Environmental geology, 54(4), 879–889.10.1007/s00254-007-0870-z ↗
26. Pellegrino, C., & Gaddo, V. (2009). Mechanical and durability characteristics of concrete containing EAF slag as aggregate. Cement & Concrete Composites, 31(9), 663–671.10.1016/j.cemconcomp.2009.05.006 ↗
27. Preciso, E., Salemi, E., & Billi, P. (2012). Land use changes, torrent control works and sediment mining: Effects on channel morphology and sediment flux, case study of the Reno River (Northern Italy). Hydrological Processes, 26(8), 1134–1148.10.1002/hyp.8202 ↗
28. Qasrawi, H., Shalabi, F., & Asi, I. (2009). Use of low CaO unprocessed steel slag in concrete as fine aggregate. Construction and Building Materials, 23(2), 1118–1125.10.1016/j.conbuildmat.2008.06.003 ↗
29. Rahman, M. A., Sarker, P. K., Shaikh, F. U. A., & Saha, A. K. (2017). Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag. Construction and Building Materials, 140, 194–202.10.1016/j.conbuildmat.2017.02.023 ↗
30. Roychand, R., De Silva, S., Law, D., & Setunge, S. (2016). Micro and nano engineered high volume ultrafine fly ash cement composite with and without additives. International Journal of Concrete Structures and Materials, 10(1), 113–124.10.1007/s40069-015-0122-7 ↗
31. Safiuddin, M., Jumaat, M. Z., Salam, M. A., Islam, M. S., & Hashim, R. (2010). Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5(13), 1952–1963.
32. Saha, A. K., & Sarker, P. K. (2016). Expansion due to alkali-silica reaction of ferronickel slag fine aggregate in OPC and blended cement mortars. Construction and Building Materials, 123, 135–142.10.1016/j.conbuildmat.2016.06.144 ↗
33. Saha, A. K., & Sarker, P. K. (2017a). Sustainable use of ferronickel slag fine aggregate and fly ash in structural concrete: Mechanical properties and leaching study. Journal of Cleaner Production.10.1016/j.jclepro.2017.06.035 ↗
34. Saha, A. K., & Sarker, P. K. (2017b). Compressive strength of mortar containing ferronickel slag as replacement of natural sand. Procedia Engineering, 171, 689–694.10.1016/j.proeng.2017.01.410 ↗
35. Saha, A. K., & Sarker, P. K. (2017c). Durability characteristics of concrete using ferronickel slag fine aggregate and fly ash. Magazine of Concrete Research. https://doi.org/10.1680/jmacr.17.00260 .10.1680/jmacr.17.00260 ↗
36. Sakoi, Y., Aba, M., Tsukinaga, Y., & Nagataki, S. (2013). Properties of concrete using ferronickel slag aggregate. In Proceedings of the 3rd international conference on sustainable construction materials and technologies, Tokyo, Japan (pp. 1–6).
37. Sato, T., Watanabe, K., Ota, A., Aba, M., & Sakoi, Y. (2011). Influence of excessive bleeding on frost susceptibility of concrete incorporating ferronickel slag as aggregates. In 36th conference on our world in concrete & structures.
38. Shafigh, P., Jumaat, M. Z., Mahmud, H. B., & Alengaram, U. J. (2013). Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag. Construction and Building Materials, 40, 231–238.10.1016/j.conbuildmat.2012.10.007 ↗
39. Shehata, M. H., Thomas, M. D., & Bleszynski, R. F. (1999). The effects of fly ash composition on the chemistry of pore solution in hydrated cement pastes. Cement and Concrete Research, 29(12), 1915–1920.10.1016/S0008-8846(99)00190-8 ↗
40. Shoya, M., Aba, M., Tsukinaga, Y., & Tokuhashi, K. (2003). Frost resistance and air void system of self-compacting concrete incorporating slag as a fine aggregate. Special Publication, 212, 1093–1108.
41. Shoya, M., Nagataki, S., Tomosawa, F., Sugita, S., & Tsukinaga, Y. (1997). Freezing and thawing resistance of concrete with excessive bleeding and its improvement. Special Publication, 170, 879–898.
42. Shoya, M., Sugita, S., Tsukinaga, Y., Aba, M., Tokuhasi, K., Dhir, R. K., & Jappy, T. G. (1999, September). Properties of self-compacting concrete with slag fine aggregates. In Proceedings of the international seminar on exploiting wastes in concrete, Thomas Telford (Vol. 7, pp. 121–130).
43. Siddique, R., & Khan, M. I. (2011). Supplementary cementing materials. New York: Springer.10.1007/978-3-642-17866-5 ↗
44. Tomosawa, F., Nagataki, S., Kajiwara, T., & Yokoyama, M. (1997). Alkali-aggregate reactivity of ferronickel-slag aggregate concrete. Special Publication, 170, 1591–1602.
45. Wang, G., Thompson, R., & Wang, Y. (2011). Hot-mix asphalt that contains nickel slag aggregate: Laboratory evaluation of use in highway construction. Transportation research record: Journal of the Transportation Research Board, 2208, 1–8.10.3141/2208-01 ↗
46. Wu, W., Zhang, W., & Ma, G. (2010). Optimum content of copper slag as a fine aggregate in high strength concrete. Materials and Design, 31(6), 2878–2883.10.1016/j.matdes.2009.12.037 ↗
47. Yang, J. M., Yoo, D. Y., Kim, Y. C., & Yoon, Y. S. (2017). Mechanical properties of steam cured high-strength steel fiber-reinforced concrete with high-volume blast furnace slag. International Journal of Concrete Structures and Materials, 11(2), 391–401.10.1007/s40069-017-0200-0 ↗
48. Yüksel, İ., Bilir, T., & Özkan, Ö. (2007). Durability of concrete incorporating non-ground blast furnace slag and bottom ash as fine aggregate. Building and Environment, 42(7), 2651–2659.10.1016/j.buildenv.2006.07.003 ↗
49. Yüksel, İ., Siddique, R., & Özkan, Ö. (2011). Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement. Construction and Building Materials, 25(2), 967–972.10.1016/j.conbuildmat.2010.06.085 ↗